|
|
Research on Bias Control of 3 Phase-1 Phase Matrix Converter Based on Model Predictive Control |
Song Weizhang1, Liu Jiang1, Sun Xiangdong1, Gao Daqing2, Wang Youyun3, Zhong Yanru1 |
1. Department of Electrical Engineering Xi’an University of Technology Xi’an 710048 China;; 2. Institute of Modern Physics Chinese Academy of Sciences Lanzhou 730000 China; 3. State Key Laboratory of Large Electric Drive System and Equipment TechnologyTianshui 741020 China |
|
|
Abstract In this paper, a model predictive control with transformer DC magnetic bias suppression is proposed to reduce the poor disturbance resistance caused by the middle side of the Reduced matrix converter (3-1MC) without energy storage capacitor. The randomness of the model predictive control switch is easy to cause the transformer DC magnetic bias. Under the premise of not changing the hardware circuit, two schemes are introduced in the model predictive control pulse sequence distribution link or the quality function by the magnetic bias suppression. A prototype is built to verify the scheme, and the experimental results show that the 3-1MC system has strong anti-interference ability under the model predictive control. The scheme 1 improves the magnetic bias phenomenon, and the scheme 2 can effectively solve the magnetic bias problem of transformer under the model predictive control.
|
Received: 30 June 2018
Published: 28 June 2019
|
|
|
|
|
[1] 王辉, 孙梅迪, 黄守道. 高频链矩阵整流器的研究综述[J]. 电网技术, 2017, 41(3): 969-977. Wang Hui, Sun Meidi, Huang Shoudao.A review of high-frequency link matrix rectifier[J]. Power System Technology, 2017, 41(3): 969-977. [2] Mogstad A B, Molinas M.Power collection and integration on the electric grid from offshore wind parks[C]//2008 Proceedings of the Nordic Workshop on Power & Industrial Electronics, Finland, 2008: 289-294. [3] Song Weizhang, Zhong Yanru, Sun Xiangdong.A study of Z-source dual-bridge matrix converter immune to abnormal input voltage disturbance and with high voltage transfer ratio[J]. IEEE Transactions on Industrial Informatics, 2013, 9(2): 828-838. [4] Varajão D, Araújo R E, Miranda L M, et al.Modulation strategy for a single-stage bidirectional and isolated AC-DC matrix converter for energy storage systems[J]. IEEE Transactions on Industrial Electronics, 2018, 65(4): 3458-3468. [5] 宋卫章, 钟彦儒, 李洁. 带相位补偿环节的双级矩阵变换器网侧电流闭环控制[J]. 电工技术学报, 2010, 25(7): 77-84. Song Weizhang, Zhong Yanru, Li Jie.Input current feedback control strategy with phase compensation component for two-stage matrix converter[J]. Transactions of China Electrotechnical Society, 2010, 25(7): 77-84. [6] 龙美志, 邓文浪. 基于新型两步换流的高频链矩阵整流器控制[J]. 电力自动化设备, 2013, 33(10): 130-135. Long Meizhi, Deng Wenlang.Based on the new two- step commutation frequency link matrix converter control[J]. Electric Power Automation Equipment, 2013, 33(10): 130-135. [7] 邓文浪, 齐庭庭. 基于电流空间矢量预测控制的HFLMR研究[J]. 电力系统保护与控制, 2013, 41(14): 108-114. Deng Wenlang, Qi Tingting.Research of high frequency link matrix rectifier based on current space vector predictive control[J]. Power System Protection and Control, 2013, 44(14): 108-114. [8] Luca Tarisciotti, Pericle Zanchetta, Alan Watson.Modulated model predictive control for a seven-level cascaded H-bridge back-to-back converter[J]. IEEE Transactions on Industrial Electronics, 2014, 61(10): 5375-5383. [9] Luo Yixiao, Liu Chunhua.A simplified model predi- ctive control for a dual three-phase PMSM with reduced harmonic currents[J]. IEEE Transactions on Industrial Electronics, 2018, 65(11): 9079-9089. [10] Felipe Donoso, Andr´es Mora, Roberto C´ardenas, et al.Finite-set model-predictive control strategies for a 3L-NPC inverter operating with fixed switching frequency[J]. IEEE Transactions on Industrial Electronics, 2018, 65(5): 3954-3964. [11] 王晓远, 傅涛. 基于模型预测控制策略的电动车用无刷直流电机回馈制动的研究[J]. 电工技术学报, 2017, 32(9): 16-23. Wang Xiaoyuan, Fu Tao.Constant current regener- ative brake in BLDCM for electric vehicle based on model predictive current[J]. Transactions of China Electrotechnical Society, 2017, 32(9): 16-23. [12] 肖智明, 陈启宏, 张立炎. 电动汽车双向DC-DC变换器约束模型预测控制研究[J]. 电工技术学报, 2018, 33(增刊2): 489-498. Xiao Zhiming, Chen Qihong, Zhang Liyan.Con- strained model predictive control for bidirectional DC-DC converter of electric vehicles[J]. Transa- ctions of China Electrotechnical Society, 2018, 33(S2): 489-498. [13] 康劲松, 李旭东, 王硕. 计及参数误差的永磁同步电机最优虚拟矢量预测电流控制[J]. 电工技术学报, 2018, 33(24): 5731-5740. Kang Jinsong, Li Xudong, Wang Shuo.Optimal virtual vector predictive current control for permanent magnet synchronous motor considering[J]. Transactions of China Electrotechnical Society, 2018, 33(24): 5731-5740. [14] 魏尧, 魏艳君, 马云飞, 等. 永磁同步电机转子位置的级联预测控制[J]. 电工技术学报, 2019, 34(1): 41-48. Wei Yao, Wei Yanjun, Ma Yunfei, et al.Cascade predictive control for rotor position of permanent magnet synchronous machines[J]. Transactions of China Electrotechnical Society, 2019, 34(1): 41-48. [15] 肖雄, 王健翔, 张勇军, 等. 一种优化的双电机主-从模型转矩预测控制策略[J]. 电工技术学报, 2018, 33(24): 5720-5730. Xiao Xiong, Wang Jianxiang, Zhang Yongjun, et al.An optimized master-slave model predictive direct torque control scheme for the dual motor[J]. Transactions of China Electrotechnical Society, 2018, 33(24): 5720-5730. [16] 王翔, 郝瑞祥, 王剑. 变压器直流偏磁对光伏并网逆变器的影响及抑制方法[J]. 电工技术学报, 2013, 28(12): 237-244. Wang Xiang, Hao Ruixiang, Wang Jian.Research on the impact of transformer DC bias on PV grid- connected inverter and restraining method[J]. Transactions of China Electrotechnical Society, 2013, 28(12): 237-244. [17] 徐骁, 杨仁刚, 孙钦斐. 基于罗氏线圈检测法的单相逆变器直流偏磁抑制[J]. 电气自动化, 2014(6): 11-13. Xu Xiao, Yang Rengang, Sun Qinfei.Suppression of DC magnetic bias of the single-phase inverter based on Rogowski coil inspection[J]. Electrical Auto- mation, 2014(6): 11-13. [18] Garces A, Molinas M.A study of efficiency in a reduced matrix converter for offshore wind farms[J]. IEEE Transactions on Industrial Electronics, 2012, 59(1): 184-193. [19] Liu Yushan, Liu Yupeng, Haitham Abu-Rub.Model predictive control of matrix converter based solid state transformer[C]//2016 IEEE International Con- ference on Industrial Technology (ICIT), Taipei, 2016: 1248-1253. [20] Patricio Cortés, Samir Kouro, Bruno La Rocca, et al.Guidelines for weighting factors design in model predictive control of power converters and drives[J]. IEEE International Conference on Industrial Tech- nology, Australia, 2009: 1-7. |
|
|
|