|
|
|
| Characteristic Parameter Simulation Method for Magnetic Coupling Resonance Wireless Power Transfer Based on Port Impedance |
| Mao Shitong1, Zhu Chunbo1, Song Kai1, Wei Guo1, Chi Haokun2 |
1.Harbin Institute of Technology School of Electrical Engineering and Automation Harbin 150001 China
2.Ocean University of China College of Information Science and Engineering Qingdao 266000 China |
|
|
|
|
Abstract Abstract Utilizing high frequency finite element simulation software and combining with the characteristics of wireless power transfer (WPT) technique,the key parameters extraction and the simulation method are proposed in this paper,based on port impedance analysis for the single self-resonance coil and two-port network equivalent model for coupled coils respectively.The practical coil is measured as a reference to verify the simulation result.Moreover,the impedance split characteristic has been studied in order to propose the calculation method for the coupling factor.Such work can provide the ideas of the coil design used in WPT system.
|
|
Received: 03 June 2015
Published: 21 October 2015
|
|
|
|
|
|
[1] Kurs A,Aristeidis K,Robert M,et al.Wireless power transfer via strongly coupled magnetic resonances[J].Science,2007,317(5834):83-86.
[2] Ahn D,Hong S.A transmitter or a receiver consisting of two strongly coupled resonators for enhanced resonant coupling in wireless power transfer[J].IEEE Transactions on Industrial Electronics,2014,61(3):1193-203.
[3] Meyer P,Germano P,Markovic M,et al.Design of a contactless energy-transfer system for desktop peripherals[J].IEEE Transactions on Industry Applications,2011,47(4):1643-1651.
[4] Matsumoto H,Daisuke T,Kouichi I,et al.Trifoliate three-phase contactless power transformer in case of winding-alignment[J].IEEE Transactions on Industrial Electronics[J],2014,61(1):53-62.
[5] Jaegue S,Shin S,Kim Y,et al.Design and implementation of shaped magnetic-resonance-based wireless power transfer system for roadway-powered moving electric vehicles[J].IEEE Transactions on Industrial Electronics,2014.61(3):1179-92.
[6] Lee S,Choi B,Rim C T.Dynamics characterization of the inductive power transfer system for online electric vehicles by laplace phasor transform[J].IEEE Transactions on Power Electronics,2013,28(12):5902-5909.
[7] Budhia M,Boys J T,Covic G A,et al.Development of a single-sided flux magnetic coupler for electric vehicle ipt charging systems[J].IEEE Transactions on Industrial Electronics,2013,60(1):318-328.
[8] Kuipers J,Bruning H,Yntema D,et al.Self-capacitance and resistive losses of saline-water-filled inductors[J].IEEE Transactions on Industrial Electronics,2014,61(5):2356-2361.
[9] Kiani M,Jow U M,Ghovanloo M.Design and optimization of a 3-coil inductive link for efficient wireless power transmission[J].IEEE Transactions on Biomedical Circuits and Systems,2011,5(6):579-591.
[10]Duong T P,Lee J W.Experimental results of high-efficiency resonant coupling wireless power transfer using a variable coupling method[J].IEEE Microwave and Wireless Components Letters,2011,21(8):442-444.
[11]Park J,Tak Y,Kim Y,et al.Investigation of adaptive matching methods for near-field wireless power transfer[J].IEEE Transactions on Antennas and Propagation,2011,59(5):1769-1773.
[12]Sample A P,Meyer D A,Smith J R.Analysis,experimental results,and range adaptation of magnetically coupled resonators for wireless power transfer[J].IEEE Transactions on Industrial Electronics,2011,58(2):544-554.
[13]Wang H,Mao Z H,Xu Q,et al.Relay effect on wireless power transfer using resonant coupling[C].38th Annual Northeast Bioengineering Conference,Philadelphia,PA,2012:428-429.
[14]RamRakhyani A K,Mirabbasi S,Mu C.Design and optimization of resonance-based efficient wireless power delivery systems for biomedical implants[J].IEEE Transactions on Biomedical Circuits and Systems,2011,5(1):48-63.
[15]Xu Q,Gao Z,He J,et al.A novel mat-based system for position-varying wireless power transfer to biomedical implants[J].IEEE Transactions on Magnetics,2013,49(8):4774-4779.
[16]Johari R,Krogmeier J V,Love D J.Analysis and practical considerations in implementing multiple transmitters for wireless power transfer via coupled magnetic resonance[J].IEEE Transactions on Industrial Electronics,2014,61(4):1774-1783.
[17]Choi B,Nho J,Cha H,et al.Design and implementation of low-profile contactless battery charger using planar printed circuit board windings as energy transfer device[J].IEEE Transactions on Industrial Electronics,2004,51(1):140-147.
[18]Haus H A.Waves and Fields in Optoelectronics[M].Prentice Hall,Englewood Cliffs,NJ,1984.
[19]李明洋.HFSS电磁仿真设计应用详解[M].北京:人民邮电出版社,2010.
[20]Chen Q,Ho S L,Fu W N.A new low radiation wireless transmission system in mobile phone application based on magnetic resonant coupling[J].IEEE Transactions on Magnetics,2013,49(7):3476-3479.
|
|
|
|
2015, Vol. 30 
