基于磁场传感阵列的压接型器件电流集中点非侵入式定位方法

doi:10.19595/j.cnki.1000-6753.tces.250806

Abstract
Figure/Table
References
Related Citation (8)

Download: PDF (9908 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Flexible high-voltage direct current (HVDC) transmission systems have become increasingly prevalent in modern power grids, particularly for long-distance bulk power transmission, integration of large-scale renewable energy sources, and interconnection of urban power networks. As the core switching component in these systems, press-pack insulated gate bipolar transistors (PP IGBTs) play a critical role in determining overall system reliability, power conversion efficiency, and operational stability. The development of non-invasive monitoring techniques capable of evaluating chip health status without modifying the original press-pack packaging structure holds significant importance for enhancing power system stability and enabling predictive maintenance strategies. This paper presents an innovative non-destructive testing methodology that utilizes an optimized external magnetic sensor array configuration to achieve localization of internal current density concentration points, thereby establishing a novel technical framework for condition monitoring of press-pack IGBTs.
The research begins with an analysis of the external magnetic field distribution characteristics exhibited by press-pack IGBT devices during operation. When energized, the internal current flow patterns generate a distinctive three-dimensional magnetic field distribution in the surrounding space. This magnetic signature demonstrates strong correlation with the operational health status of the semiconductor device, as aging or damage mechanisms produce measurable anomalies in the field distribution. By continuously monitoring spatial and temporal variations in the external magnetic field, it becomes possible to indirectly reconstruct and evaluate the internal current density distribution profile, enabling assessment of device condition. However, practical implementation faces significant challenges due to the complex electromagnetic environment in power electronic converters, where strong interference fields from busbars superimpose with target signals. To address this issue, this paper proposes a method that significantly suppresses external magnetic interference by optimizing sensor placement, while ensuring accurate measurement of magnetic field characteristics and minimizing busbar interference.
Secondly, this paper proposes a current concentration point localization method based on external magnetic field ratios. Theoretical derivation proves that under constant total current conditions, when a device fails, the external magnetic field is determined solely by the current amplitude and the coordinates of the current concentration point, and is directly proportional to the current amplitude. Therefore, the ratio of magnetic fields measured at two different positions can eliminate the influence of current amplitude, with the ratio depending only on the coordinates of the current concentration point. Based on this principle, two orthogonally arranged sensor arrays simultaneously measure the magnetic field to obtain two magnetic field ratio curves, whose intersection point represents the actual current concentration point. Subsequent finite element simulations verify the effectiveness of this method, demonstrating a maximum localization error of 8.9 mm and a relative accuracy of 92.6% within a 120 mm diameter detection range.
Finally, experimental results verify the feasibility of the proposed method. Anti-busbar interference tests demonstrate that the optimized sensor array reduces busbar interference to 7.4% of its original level. In customized metal conductor experiments where different conductor caps were used to control current distribution, results show a maximum positioning error of 11.1 mm and a relative positioning accuracy of 90.7% within a 120 mm diameter detection range. Subsequent experiments conducted on actual press-pack IGBT devices confirm the applicability of the proposed method for practical components.

Key words： Press pack devices non-invasive sensing localization method for current concentration points noise-immunity technique

Received: 13 May 2025

PACS:

TM937

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Shen Hong
	Cui Hao
	Zhong Junshuai
	Lu Yuanfang
	Qi Lei

Cite this article:

Shen Hong,Cui Hao,Zhong Junshuai等. Method for Current Concentration Points in Press Pack Devices Based on Magnetic Field Sensor Arrays[J]. Transactions of China Electrotechnical Society, 2026, 41(11): 3602-3611.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.250806 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I11/3602

[1] 范兴明, 李涛, 张鑫. 基于电容自然充电换相的混合式直流断路器设计与仿真[J]. 电工技术学报, 2024, 39(11): 3510-3521.
Fan Xingming, Li Tao, Zhang Xin.Design and simulation of hybrid DC circuit breaker based on capacitor natural charging commutation[J]. Transactions of China Electrotechnical Society, 2024, 39(11): 3510-3521.
[2] 黄雄辉, 宋延涛, 鲁翔, 等. 基于全国产芯片的特高压柔性直流控制保护设备研制[J]. 高压电器, 2024, 60(11): 169-179, 190.
Huang Xionghui, Song Yantao, Lu Xiang, et al.Development of UHV flexible DC control and protection equipment based on full localization chips[J]. High Voltage Apparatus, 2024, 60(11): 169-179, 190.
[3] 童颜, 刘克明, 莫申扬, 等. 一种具备长期失效短路能力的弹性压接型IGBT器件[J]. 半导体技术, 2024, 49(12): 1090-1096.
Tong Yan, Liu Keming, Mo Shenyang, et al.Elastic press-pack IGBT devices with long-term short circuit failure capability[J]. Semiconductor Technology, 2024, 49(12): 1090-1096.
[4] 郑涛, 李紫肖, 陈云飞, 等. 基于等效故障区段的柔性直流输电线路单端量保护方案[J]. 电工技术学报, 2025, 40(3): 771-785.
Zheng Tao, Li Zixiao, Chen Yunfei, et al.Single terminal protection scheme for flexible DC transmission lines based on equivalent fault section[J]. Transactions of China Electrotechnical Society, 2025, 40(3): 771-785.
[5] Chen Zhengyu, Yu Zhanqing, Zhang Xiangyu, et al.Analysis and experiments for IGBT, IEGT, and IGCT in hybrid DC circuit breaker[J]. IEEE Transactions on Industrial Electronics, 2018, 65(4): 2883-2892.
[6] 鲁宇加, 焦超群, 陈蕊, 等. 基于多物理场耦合的压接型IGBT功率循环应力特性仿真分析[J]. 高电压技术, 2024, 50(9): 4195-4206.
Lu Yujia, Jiao Chaoqun, Chen Rui, et al.Simulation and analysis of power cycle stress characteristics of press-pack IGBTs based on multiphysics coupling[J]. High Voltage Engineering, 2024, 50(9): 4195-4206.
[7] Chen Lüyang, Zhang Xiangyu, Shi Yan, et al.A novel mixture-devices-based submodule for MMC by using low on-state voltage IGCT and high di/dt ability IGBT[J]. IEEE Transactions on Industrial Electronics, 2024, 71(3): 2375-2384.
[8] 周扬, 唐新灵, 王亮, 等. 压接型IGBT器件短路失效管壳爆炸特性及防护方法[J]. 中国电机工程学报, 2024, 44(6): 2350-2362.
Zhou Yang, Tang Xinling, Wang Liang, et al.Explosion characteristics and protection methods of the shell in press pack IGBT devices short-circuit failure[J]. Proceedings of the CSEE, 2024, 44(6): 2350-2362.
[9] 刘思佳, 文腾, 李学宝, 等. 高压大功率弹性压接型IGBT器件封装绝缘结构中的电场瞬态特性[J]. 电工技术学报, 2023, 38(23): 6253-6265.
Liu Sijia, Wen Teng, Li Xuebao, et al.Electric field transient characteristics of high voltage and high power compliant press-pack IGBT device package insulation structure[J]. Transactions of China Electro-technical Society, 2023, 38(23): 6253-6265.
[10] 李辉, 刘人宽, 王晓, 等. 压接型IGBT器件封装退化监测方法综述[J]. 电工技术学报, 2021, 36(12): 2505-2521.
Li Hui, Liu Renkuan, Wang Xiao, et al.Review on package degradation monitoring methods of press-pack IGBT modules[J]. Transactions of China Electrotechnical Society, 2021, 36(12): 2505-2521.
[11] 彭程, 李学宝, 范迦羽, 等. 压接型IGBT器件内部杂散电感差异对瞬态电流分布影响规律研究[J]. 电工技术学报, 2023, 38(11): 2850-2860.
Peng Cheng, Li Xuebao, Fan Jiayu, et al.Effect of stray inductance difference on transient current distribution in press-pack IGBT devices[J]. Transactions of China Electrotechnical Society, 2023, 38(11): 2850-2860.
[12] Peng Cheng, Li Xuebao, Fan Jiayu, et al.Experimental investigations on current sharing characteristics of parallel chips inside press-pack IGBT devices[J]. IEEE Transactions on Power Electronics, 2022, 37(9): 10672-10680.
[13] 张健, 余超耘, 占草, 等. 压接型高压IGBT门极驱动信号演化规律及失效形式研究[J]. 高压电器, 2023, 59(1): 43-48.
Zhang Jian, Yu Chaoyun, Zhan Cao, et al.Study on evolution and failure mode of gate drive signals of high voltage press-pack IGBT[J]. High Voltage Apparatus, 2023, 59(1): 43-48.
[14] 胡震, 崔曼, 吴晓华, 等. 基于空间多点位温度IGBT器件参数逆推的健康状态在线监测方法[J]. 电工技术学报, 2025, 40(2): 452-462.
Hu Zhen, Cui Man, Wu Xiaohua, et al.On-line condition monitoring of IGBT module based on parameter inversion of spatial multi-point temperature[J]. Transactions of China Electrotechnical Society, 2025, 40(2): 452-462.
[15] Lai Wei, Li Hui, Chen Minyou, et al.Investigation on the effects of unbalanced clamping force on multichip press pack IGBT modules[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2019, 7(4): 2314-2322.
[16] 唐新灵, 张朋, 陈中圆, 等. 高压大功率压接型IGBT器件封装技术研究综述[J]. 中国电机工程学报, 2019, 39(12): 3622-3638.
Tang Xinling, Zhang Peng, Chen Zhongyuan, et al.Review of high voltage high power press pack IGBT package technology[J]. Proceedings of the CSEE, 2019, 39(12): 3622-3638.
[17] 顾妙松, 崔翔, 彭程, 等. 外部汇流母排对压接型IGBT器件内部多芯片并联均流特性的影响[J]. 中国电机工程学报, 2020, 40(1): 234-245, 390.
Gu Miaosong, Cui Xiang, Peng Cheng, et al.Influence of the external busbar on current sharing performance inside a multi-chip press-pack IGBT device[J]. Proceedings of the CSEE, 2020, 40(1): 234-245, 390.
[18] 彭程, 李学宝, 顾妙松, 等. 压接型IGBT器件内部芯片电流测量时罗氏线圈的误差分析及改进方法[J]. 中国电机工程学报, 2020, 40(22): 7388-7398.
Peng Cheng, Li Xuebao, Gu Miaosong, et al.Error analysis and improvement method of rogoswski coil in current measurement of internal chips in press-pack IGBT devices[J]. Proceedings of the CSEE, 2020, 40(22): 7388-7398.
[19] 季一润, 袁文迁, 槐青, 等. 压接型IGBT器件内芯片电流测量线圈宽频特性与参数选择[J]. 半导体技术, 2024, 49(12): 1072-1081.
Ji Yirun, Yuan Wenqian, Huai Qing, et al.Broadband characteristics and parameters selection of chip current measurement coils for press-pack IGBT device[J]. Semiconductor Technology, 2024, 49(12): 1072-1081.
[20] Li He, Xin Zhen, Li Xue, et al.Extended wide-bandwidth Rogowski Current sensor with PCB coil and electronic characteristic shaper[J]. IEEE Transactions on Power Electronics, 2021, 36(1): 29-33.
[21] 李赫. 基于PCB罗氏线圈的碳化硅功率器件运行电流高频感知技术研究[D]. 天津: 河北工业大学, 2022.
Li He.Research on high frequency sensing technology of SiC power device operating current based on PCB Rogowski coil[D]. Tianjin: Hebei University of Technology, 2022.
[22] Jiao Chaoqun, Zhang Zuoming, Zhao Zhibin, et al.Integrated Rogowski coil sensor for press-pack insulated gate bipolar transistor chips[J]. Sensors, 2020, 20(15): 4080.
[23] 焦超群, 黄涛, 张秀敏, 等. 用于压接型IGBT器件芯片电流测量的带金属屏蔽层集成PCB Rogowski线圈的研究[J]. 中国电机工程学报, 2022, 42(24): 9105-9118.
Jiao Chaoqun, Huang Tao, Zhang Xiumin, et al.Integrated Rogowski coil sensor for press-pack insulated gate bipolar transistor chips with shielding layers[J]. Proceedings of the CSEE, 2022, 42(24): 9105-9118.
[24] Fu Shi, Zhang Guanrou, Zhan Yongfan, et al.Method of segmented turns arrangement of PCB Rogowski coil with anti-interference ability[J]. IEEE Transactions on Instrumentation and Measurement, 2021, 70: 9511612.
[25] Fu Shi, Deng Erping, Peng Cheng, et al.Method of turns arrangement of noncircular Rogowski coil with rectangular section[J]. IEEE Transactions on Instrum-entation and Measurement, 2020, 70: 9000310.
[26] Qi Lei, Liu Yiyang, Zhang Xiangyu, et al.Noninvasive current distribution sensing in press pack power electronic devices through few-measurement magnetic field analysis[J]. IEEE Transactions on Industrial Electronics, 2024, 71(10): 13476-13479.