自由区电磁炉锅具位置辨识及功率调节

doi:10.19595/j.cnki.1000-6753.tces.240421

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (7169 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to realize the freedom of placing pots, the free zone induction cooker with multiple induction heating coils is gradually developing. It can perform user-customized heating of different pots, greatly improving the flexibility of using the induction cooker. In actual work, the induction heating coil in the corresponding area needs to be triggered based on the real-time position. Therefore, the correct identification of the pot position affects the working status and heating performance of the free zone induction cooker system. As a result, pot position identification has become a key factor that needs to be solved urgently. Traditional pot position identification methods are easily affected by fluctuations in external factors, require a large amount of sample data, and need to improve the accuracy and speed of pot position identification. This paper indicates that the misalignment of the pot affects the mutual inductance M between the pot and the induction heating coil, thereby affecting the impedance and current phase of the system. An identification method is proposed using the current phase to control the switch array, which achieves positioning and heating of the pot. The proposed pot position identification strategy requires a small amount of sample data, and the branch current phase is only related to the position of the pot. It is not easily affected by system voltage and current fluctuations, so the position of the pot can be judged in real-time.
Secondly, regarding the impact of pot misalignment on current and power, this paper introduces a power regulation strategy based on an adjustable capacitor circuit. Under the misaligned working condition of the pot, the disturbance observation method of maximum current search is used to adaptively adjust the adjustable capacitor. The maximum power output of the induction cooker is obtained, and the heating speed of the pot is improved. The pot position identification strategy and the power regulation strategy coordinate to ensure accurate identification of the pot position and rapid heating, which only needs to collect the current information of the system branch. Thus, the sampling circuit is simplified.
Finally, an experimental prototype of a free zone induction cooker based on three coils was built. Experimental results show that in the pot position identification strategy, the accuracy of the theoretical and experimental phases is over 96%, and the identification speed is 0.8 ms. The maximum temperature rise within three minutes is 17.3℃ using the power regulation strategy, higher than without the power regulation strategy. The proposed pot position identification strategy can correctly identify the exact position of the pot and achieve the maximum power output of the induction cooker after the power regulation strategy. The correctness of the pot position identification strategy and the power regulation strategy are verified.

Key words： Free zone induction cooker pot position identification power regulation

Received: 18 March 2024

PACS:

TM924.01

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Bo
	Tan Ping'an
	Tan Guang
	Tang Rui

Cite this article:

Wang Bo,Tan Ping'an,Tan Guang等. Pot Position Identification and Power Regulation for Free Zone Induction Cooker[J]. Transactions of China Electrotechnical Society, 2025, 40(8): 2393-2404.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.240421 OR https://dgjsxb.ces-transaction.com/EN/Y2025/V40/I8/2393

[1] 涂彦昕, 梅红伟, 刘立帅, 等. 基于动态扫描涡流热成像技术的碳钢结构损伤检测[J]. 电工技术学报, 2023, 38(11): 2999-3008.
Tu Yanxin, Mei Hongwei, Liu Lishuai, et al.Damage detection of carbon steel structure based on dynamic scanning eddy current thermal imaging technology[J]. Transactions of China Electrotechnical Society, 2023, 38(11): 2999-3008.
[2] 张文峰, 姜永将, 张晓红, 等. 一种双C型高温超导直流感应加热装置及其性能分析[J]. 电工技术学报, 2021, 36(增刊2): 444-450.
Zhang Wenfeng, Jiang Yongjiang, Zhang Xiaohong, et al.A double-C high-temperature superconducting DC induction heater and analysis of its perfor-mance[J]. Transactions of China Electrotechnical Society, 2021, 36(S2): 444-450.
[3] Sarnago H, Lucía Ó, Pérez-Tarragona M, et al.Dual-output boost resonant full-bridge topology and its modulation strategies for high-performance induction heating applications[J]. IEEE Transactions on Industrial Electronics, 2016, 63(6): 3554-3561.
[4] 张思彦, 陈为, 林甲深. 新型多相位多线圈激励感应加热电磁炉[J]. 电工电能新技术, 2016, 35(2): 44-47, 53.
Zhang Siyan, Chen Wei, Lin Jiashen.Induction cooker with novel multi-coils and multiphase excitations[J]. Advanced Technology of Electrical Engineering and Energy, 2016, 35(2): 44-47, 53.
[5] 李震, 郑海峰, 陈俊岐, 等. 基于磁感应联合加热的高压海缆工厂接头制备技术[J]. 电工技术学报, 2024, 39(3): 820-835.
Li Zhen, Zheng Haifeng, Chen Junqi, et al.Manu-facturing technology of high-voltage submarine cable factory joint based on magnetic induction combined heating[J]. Transactions of China Electrotechnical Society, 2024, 39(3): 820-835.
[6] 冷朝霞, 刘庆丰. 基于多电平逆变器的感应加热双频率输出设计[J]. 电工技术学报, 2016, 31(24): 195-204.
Leng Zhaoxia, Liu Qingfeng.Design of dual frequency output of induction heating based on multilevel inverter[J]. Transactions of China Electro-technical Society, 2016, 31(24): 195-204.
[7] 李成祥, 沈婷, 吴浩, 等. 平板集磁器结构对涡流分布与集磁效果的影响规律[J]. 电工技术学报, 2023, 38(15): 4087-4096.
Li Chengxiang, Shen Ting, Wu Hao, et al.Influence of the structure parameters of the flat field shaper on the eddy current distribution and magnetic con-centration effect[J]. Transactions of China Electro-technical Society, 2023, 38(15): 4087-4096.
[8] Lucia O, Acero J, Carretero C, et al.Induction heating appliances: toward more flexible cooking surfaces[J]. IEEE Industrial Electronics Magazine, 2013, 7(3): 35-47.
[9] Öztürk M, Oktay U, Yılmaz N, et al.Comparison of pan detection methods for single switch topology used in domestic induction cooking[C]//2020 International Conference on Smart Energy Systems and Tech-nologies (SEST), Istanbul, Turkey, 2020: 1-6.
[10] Gambhir A, Mishra S.Control algorithm for a zone-less induction cooktop[C]//2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Trivandrum, India, 2016: 1-5.
[11] Wang Zhihui, Li Yupeng, Sun Yue, et al.Load detection model of voltage-fed inductive power transfer system[J]. IEEE Transactions on Power Electronics, 2013, 28(11): 5233-5243.
[12] 曹稳坤. 基于STM32微控制器的自由感应加热控制技术研究[D]. 成都: 电子科技大学, 2016.
Cao Wenkun.Research on free induction heating control technology based on STM32 micro-controller[D]. Chengdu: University of Electronic Science and Technology of China, 2016.
[13] 陈为美. 基于FPGA自由感应加热智能控制技术研究[D]. 成都: 电子科技大学, 2016.
Chen Weimei.Research on intelligent control technology of free induction heating based on FPGA[D]. Chengdu: University of Electronic Science and Technology of China, 2016.
[14] 刘方舟, 李玉玲, 高宏. 基于电流相位的多负载电磁炉锅具检测方法[J]. 电工技术, 2021(23): 14-17.
Liu Fangzhou, Li Yuling, Gao Hong.Detection method of multi-load induction cooker based on current phase[J]. Electric Engineering, 2021(23): 14-17.
[15] 张献, 邢子瑶, 薛明, 等. 无线电能传输系统异物检测技术研究综述[J]. 电工技术学报, 2022, 37(4): 793-807.
Zhang Xian, Xing Ziyao, Xue Ming, et al.Overview of foreign object detection in wireless power transfer system[J]. Transactions of China Electrotechnical Society, 2022, 37(4): 793-807.
[16] 苏玉刚, 侯信宇, 戴欣. 磁耦合无线电能传输系统异物检测技术综述[J]. 中国电机工程学报, 2021, 41(2): 715-727.
Su Yugang, Hou Xinyu, Dai Xin.Review of foreign object detection technology in magnetic coupling wireless power transfer system[J]. Proceedings of the CSEE, 2021, 41(2): 715-727.
[17] Jafari H, Moghaddami M, Sarwat A I.Foreign object detection in inductive charging systems based on primary side measurements[J]. IEEE Transactions on Industry Applications, 2019, 55(6): 6466-6475.
[18] Jeong S Y, Thai V X, Park J H, et al.Self-inductance-based metal object detection with mistuned resonant circuits and nullifying induced voltage for wireless EV chargers[J]. IEEE Transactions on Power Electronics, 2019, 34(1): 748-758.
[19] 苏文博, 王维, 吕晓飞, 等. 含金属异物的无线充电系统场域等效建模分析[J]. 电力工程技术, 2023, 42(3): 226-232, 249.
Su Wenbo, Wang Wei, Lü Xiaofei, et al.Field equivalent modeling analysis of wireless charging system with metal foreign objects[J]. Electric Power Engineering Technology, 2023, 42(3): 226-232, 249.
[20] Sun Ying, Song Kai, Zhou Tian, et al.A shared method of metal object detection and living object detection based on the quality factor of detection coils for electric vehicle wireless charging[J]. IEEE Trans-actions on Instrumentation and Measurement, 2023, 72: 9002517.
[21] Lucia O, Navarro D, Guillén P, et al.Deep learning-based magnetic coupling detection for advanced induction heating appliances[J]. IEEE Access, 2019, 7: 181668-181677.
[22] Park S M, Noh Y S, Hyon B J, et al.Control strategy of resonant load identification for free zone induction heating systems with WBG-based multiple inverters[C]/2021 24th International Conference on Electrical Machines and Systems (ICEMS), Gyeongju, Republic of Korea, 2021: 2145-2149.
[23] Bono-Nuez A, Martin-del-Brio B, Bernal-Ruiz C, et al. The inductor as a smart sensor for material identification in domestic induction cooking[J]. IEEE Sensors Journal, 2018, 18(6): 2462-2470.
[24] Qais M H, Loo K H, Liu J, et al.Least mean square-based fuzzy C-means clustering for load identification of induction heating[J]. IEEE Transa-ctions on Instrumentation and Measurement, 2022, 71: 1-10.
[25] Kamaeguchi K, Umetani K, Hiraki E.Application of automatic resonant frequency tuning circuit to induction heating system[C]//2018 20th European Conference on Power Electronics and Applications (EPE'18 ECCE Europe), Riga, Latvia, 2018: 1-9.
[26] 王启涵, 姚缨英, 陈卫宝. 电磁感应加热中加热物体位置的选择[J]. 电工技术学报, 2011, 26(6): 160-165.
Wang Qihan, Yao Yingying, Chen Weibao.Selection of heating object’s position in electromagnetic indu-ction heating[J]. Transactions of China Electro-technical Society, 2011, 26(6): 160-165.
[27] Han Wei, Chau K T, Jiang Chaoqiang, et al.All-metal domestic induction heating using single-frequency double-layer coils[J]. IEEE Transactions on Mag-netics, 2018, 54(11): 8400705.
[28] Im S H, Kim J S, Jang Y S, et al.Design of ferrite core for the improvement of power efficiency in induction range[J]. IEEE Transactions on Magnetics, 2019, 55(6): 8001304.
[29] Lope I, Acero J, Carretero C.Analysis and optimi-zation of the efficiency of induction heating applications with litz-wire planar and solenoidal coils[J]. IEEE Transactions on Power Electronics, 2016, 31(7): 5089-5101.
[30] Lucia O, Burdio J M, Millan I, et al.Load-adaptive control algorithm of half-bridge series resonant inverter for domestic induction heating[J]. IEEE Transactions on Industrial Electronics, 2009, 56(8): 3106-3116.
[31] Carretero C, Acero J, Alonso R, et al.Modeling mutual impedances of loaded non-coaxial inductors for induction heating applications[J]. IEEE Transa-ctions on Magnetics, 2008, 44(11): 4115-4118.
[32] Hu Zhiyuan, Qiu Yajie, Wang Laili, et al.An interleaved LLC resonant converter operating at constant switching frequency[C]//2012 IEEE Energy Conversion Congress and Exposition (ECCE), Raleigh, NC, USA, 2012: 3541-3548.
[33] Aoyama M, Thimm W, Knoch M, et al.Proposal and challenge of halbach array type induction coil for cooktop applications[J]. IEEE Open Journal of Industry Applications, 2021, 2: 168-177.