Transactions of China Electrotechnical Society  2020, Vol. 35 Issue (18): 3960-3971    DOI: 10.19595/j.cnki.1000-6753.tces.191012
Current Issue| Next Issue| Archive| Adv Search |
Fabrication of the Micro/Nano-Structure Al2O3/PTFE Composite Functional Film on the Surface of Insulation Pressboard and Its Effect on Space Charge Injection
Li Yanqing, Hao Jian, Liu Cong, Liao Ruijin, Yang Lijun
State Key Laboratory of Power Transmission Equipment & System Security and New Technology Chongqing University Chongqing 400044 China

Download: PDF (53342 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract  The suppression of space charge injection and accumulation is of great significance for improving the stability of the oil-paper insulation system in converter transformer. The conventional method of decreasing the space charge amount is to modify the materials by nano doping. However, its modification effect is limited by the degree of nano particles. Surface modification has the advantages of simple craft and good reproducibility, and it can add some new property to the material without affecting other bulk properties. This paper successfully fabricated a micro/nano-structure Al2O3/PTFE composite functional film on the surface of the insulation pressboard using ratio frequency magnetron sputtering. The chemical composition and micro morphology were detected. Then the characteristic of space charge, DC breakdown and trap level distribution were analyzed by a comparative method. The results show that, the prepared functional film exists on the surface of the insulation pressboard in a form of micro/nano structure. The functional film can effectively suppress the space charge injection, thereby promoting the DC breakdown voltage. Compared to the untreated pressboard, the total charge amount decreases by 40% under the electric field strength of 15kV/mm, and the distortion of the electric field drops from 33.33% to 6.7%. The DC breakdown promotion of the pressboard increases by 5.3% for the direct breakdown test and 15% for the pre-stress test. The results of the thermal stimulated depolarization current (TSDC) test indicate that the introduction of numerous deep traps is the key factor to explain the space charge mitigation and the increase of DC breakdown voltage.
Key wordsOil-paper insulation      magnetron sputtering      micro-nano structure      composite functional film      space charge inhibition      DC breakdown     
Received: 06 August 2019     
PACS: TM85  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Li Yanqing
Hao Jian
Liu Cong
Liao Ruijin
Yang Lijun
Cite this article:   
Li Yanqing,Hao Jian,Liu Cong等. Fabrication of the Micro/Nano-Structure Al2O3/PTFE Composite Functional Film on the Surface of Insulation Pressboard and Its Effect on Space Charge Injection[J]. Transactions of China Electrotechnical Society, 2020, 35(18): 3960-3971.
URL:  
https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.191012     OR     https://dgjsxb.ces-transaction.com/EN/Y2020/V35/I18/3960
Copyright © Transactions of China Electrotechnical Society
Supported by: Beijing Magtech