PWM逆变器供电引起的轴向磁通非晶电机谐波损耗的解析计算

doi:10.19595/j.cnki.1000-6753.tces.161289

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (441 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Amorphous alloys are considered as an appropriate core material for high-frequency motors because of their outstanding low power loss characteristics. When supplied by a PWM inverter, however, the harmonic losses of high-frequency motors will enormously increase. The key for designing and optimizing an amorphous alloy axial-flux permanent magnet motor is the fast and accurate calculation of harmonic losses during the original designing stage. In this paper, because of the large time consuming of three dimensional time step finite element analysis method, the present multilayer coupled model is further improved. An analytical method of air gap flux density is derived which can take high order carrier harmonics into account. The analytical methods of stator core losses and rotor eddy current losses are then deduced in consideration of the influence of eddy current reaction. The analytical calculation results of harmonic losses are compared with measured results and those obtained by the three dimensional FEA method. It is shown that the average calculation error of rotor losses is 9.69%, which means the improved analytical method features in high accuracy.

Key words： Amorphous alloy axial-flux permanent magnet motor PWM inverter harmonic losses analytical method

Received: 16 August 2016 Published: 30 August 2017

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhu Longfei
	Zhu Jianguo
	Tong Wenming
	Han Xueyan

Cite this article:

Zhu Longfei,Zhu Jianguo,Tong Wenming等. Analytical Calculation of Harmonic Losses of an Axial Flux Amorphous Motor Caused by PWM Inverter Supplying[J]. Transactions of China Electrotechnical Society, 2017, 32(16): 115-123.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.161289 OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I16/115

[1] Dems M, Komeza K. Performance characteristics of a high-speed energy-saving induction motor with a amorphous stator core[J]. IEEE Transactions on Industrial Electronics, 2014, 61(6): 3046-3055.
[2] Fan T, Li Q, Wen X H. Development of a high power density motor made of amorphous alloy cores[J]. IEEE Transactions on Industrial Electronics, 2014, 61(9): 4510-4518.
[3] Johnson L A, Cornell E P, Bailey D J, et al. Application of low loss amorphous metals in motor and transformers[J]. IEEE Transactions on Power Apparatus and Systems, 1982, 101(7): 2109-2114.
[4] 曾宪金, 李小为, 胡立坤, 等. 基于自然坐标与功率前馈的三相电压型PWM变流器控制[J]. 电力系统保护与控制, 2015, 43(11): 13-20.
Zeng Xianjin, Li Xiaowei, Hu Likun, et al. Natural coordinate and power feedforward control of three- phase voltage-source PWM converter[J]. Power System Protection and Control, 2015, 43(11): 13-20.
[5] 苏匀, 李少华, 王秀丽, 等. 基于PWM交交变频器的分频风电系统研究[J]. 电力系统保护与控制, 2015, 43(13): 86-91.
Su Yun, Li Shaohua, Wang Xiuli, et al. Research on fractional frequency wind power system based on PWM cycloconvertor[J]. Power System Protection and Control, 2015, 43(13): 86-91.
[6] 陆原, 胡丙辉, 张军伟, 等. 基于SVPWM调制的三段式算法研究[J]. 电力系统保护与控制, 2016, 44(6): 68-75.
Lu Yuan, Hu Binghui, Zhang Junwei, et al. A three-segment algorithm research based on SVPWM modulation[J]. Power System Protection and Control, 2016, 44(6): 68-75.
[7] 朱龙飞, 朱建国, 佟文明, 等. 非晶合金永磁同步电机空载损耗[J]. 电机与控制学报, 2015, 19(7): 19-26.
Zhu Longfei, Zhu Jianguo, Tong Wenming, et al. Study on no-load losses of permanent magnet synchronous motor with amorphous alloy stator core[J]. Electric Machines and Control, 2015, 19(7): 19-26.
[8] Jensen C C, Profumo F, Lipo T A. A low-loss permanent-magnet brushless DC motor utilizing tape wound amorphous iron[J]. IEEE Transactions on Industry Applications, 1992, 28(3): 646-651.
[9] 徐永向, 胡建辉, 胡任之, 等. 永磁同步电机转子涡流损耗计算的实验验证方法[J]. 电工技术学报, 2007, 22(7): 150-154.
Xu Yongxiang, Hu Jianhui, Hu Renzhi, et al. An experimental verification method of calculation for rotor eddy current losses in PMSMs[J]. Transactions of China Electrotechnical Society, 2007, 22(7): 150-154.
[10] Wang Z N, Masaki R, Morinaga S, et al. Development of an axial gap motor with amorphous metal cores[J]. IEEE Transactions on Industry Applications, 2011, 47(3): 1293-1299.
[11] Li J, Choi D W, Koo D H, et al. Eddy-current calculation of solid components in fractional slot axial flux permanent magnet synchronous machines[J]. IEEE Transactions on Magnetics, 2011, 47(10): 4254-4257.
[12] 倪有源, 黄亚, 赵亮. 新型结构永磁屏蔽电机三维磁场分析和电感计算[J]. 电工技术学报, 2015, 30(1): 98-104.
Ni Youyuan, Huang Ya, Zhao Liang. Analysis of 3-dimensional field and calculation of inductance for a new structure of a permanent magnet canned motor[J]. Transactions of China Electrotechnical Society, 2015, 30(1): 98-104.
[13] 徐妲, 林明耀, 付兴贺, 等. 混合励磁轴向磁场磁通切换型永磁电机静态特性[J]. 电工技术学报, 2015, 30(2): 58-63.
Xu Da, Lin Mingyao, Fu Xinghe, et al. Static characteristics of novel hybrid axial field flux-switching PM machines[J]. Transactions of China Electrotechnical Society, 2015, 30(2): 58-63.
[14] 李华阳, 沈建新. 不同结构轴向磁通永磁电机的有限元设计与对比研究[J]. 电工技术学报, 2015, 30(14): 32-40.
Li Huayang, Shen Jianxin. FEA-based design and comparative study of axial flux permanent magnet machines with various topologies[J]. Transactions of China Electrotechnical Society, 2015, 30(14): 32-40.
[15] Tiegna H, Bellara A, Amara Y, et al. Analytical modeling of the open-circuit magnetic field in axial flux permanent-magnet machines with semi-closed slots[J]. IEEE Transactions on Magnetics, 2012, 48(3): 1212-1226.
[16] Sergeant P, Vansompel H, Hemeida A, et al. A computationally efficient method to determine iron and magnet losses in VSI-PWM fed axial flux permanent magnet synchronous machines[J]. IEEE Transactions on Magnetics, 2014, 50(8): 8101710.
[17] Cater F W. Air-gap induction[J]. Electrical World and Engineer, 1901, 38(22): 884-888.
[18] 顾其善. 永磁电机的卡特系数[J]. 中小型电机, 1986(5): 11-14.
Gu Qishan. The Cater coefficient of permanent magnet electric machines[J]. S&M Electric Machines, 1986(5): 11-14.
[19] Heller B, Jokl A L. Tangential forces in squirrel-cage induction motors[J]. IEEE Transactions on Power Apparatus and Systems, 1969, 88(4): 484-492.
[20] Zhu Z Q, Howe D. Instantaneous magnetic field distribution in permanent magnet brushless DC motors, part IV: magnetic field on load[J]. IEEE Transactions on Magnetics, 1993, 29(1): 152-158.
[21] Derlecki S, Kusmierek Z, Dems M, et al. Magnetic properties of amorphous materials used as corps of electric machines[J]. Electrical Review, 2012, 88(5a): 10-13.
[22] 中国钢铁工业协会. GB/T 3658—2008 软磁材料交流磁性能环形试样的测量方法[S]. 北京: 中国标准出版社, 2008.
[23] 唐任远. 现代永磁电机理论与设计[M]. 北京: 机械工业出版社, 1997.
[24] Zhu Z Q, Howe D. Analytical prediction of rotor eddy current loss in brushless machines equipped with surface-mounted permanent magnets, part II: accounting for eddy current reaction field[C]//IEEE International Conference on Electrical Machines and Systems, 2001: 806-809.
[25] Vansompel H, Sergeant P, Dupre L. A multilayer 2-D-2-D coupled model for eddy current calculation in the rotor of an axial-flux PM machine[J]. IEEE Transactions on Energy Conversion, 2012, 27(3): 784-791.
[26] 胡之光. 电机电磁场的分析与计算[M]. 北京: 机械工业出版社, 1989.
[27] International Electrotechnical Commission. IEC 60034-2-3: rotating electrical machines-part 2-3: specific test methods for determining losses and efficiency of converter-fed AC motors[S]. Brussels: Standards Publications, 2011.
[28] Yamazaki K, Seto Y. Iron loss analysis of interior permanent-magnet synchronous motors—variation of main loss factors due to driving condition[J]. IEEE Transactions on Industry Applications, 2006, 42(4): 1045-1052.