无轴承交替极永磁电机集中式悬浮绕组结构及其优化设计方法

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (24238 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, the influence of structure of concentrated winding on suspension performance is studied at a bearingless consequent-pole permanent magnet motor with 12 slots and 8 poles. Improved concentrated suspension winding structures and the related optimization methods have been studied. Firstly, the reason that a strong coupling exists between radial degrees of freedom is analyzed in two-phase and three-phase conventional concentrated windings. Then, based on the structure of a three-phase improved concentrated suspension winding with sub-coils, a two-phase improved concentrated suspension winding with sub-coils is proposed. To optimize the two types of improved concentrated suspension windings, the optimization method based on suspension force expressions is presented. However, due to its complicated optimization process, a new and simple optimization method based on minimization of total harmonic distortion of suspension magnetic motive force is proposed. Finally, two optimization methods are applied to optimize the two-phase and three-phase improved concentrated suspension windings. Case study verifies the two methods.

Key words： Bearingless motor consequent-pole winding structure optimization method minimization of total harmonic distortion suspension performance

Received: 28 July 2014 Published: 20 October 2015

PACS:

TM343

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Ding Qiang
	Deng Zhiquan
	Wang Xiaolin

Cite this article:

Ding Qiang,Deng Zhiquan,Wang Xiaolin. Structure of Concentrated Suspension Windings and Its Optimization Design Methods of Bearingless Consequent-Pole Permanent Magnet Motor[J]. Transactions of China Electrotechnical Society, 2015, 30(18): 104-111.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2015/V30/I18/104

[1] Chiba A, Rahman M A, Fukao T. Radial force in a bearingless reluctance motor[J]. IEEE Transactions on Magnetics, 1991, 27(2): 786-790.
[2] Chiba A, Asama J. Influence of rotor skew in induction type bearingless motor[J]. IEEE Transactions on Magnetics, 2012, 48(11): 4646-4649.
[3] Li Chen, Hofmann W. Speed regulation technique of one bearingless 8/6 switched reluctance motor with simpler single winding structure[J]. IEEE Transactions on Industrial Electronics, 2012, 59(6): 2592-2600.
[4] Huang J, Li B N, Jiang H B, et al. Analysis and control of multiphase permanent-magnet bearingless motor with a single set of half-coiled winding[J]. IEEE Transactions on Industrial Electronics, 2014, 61(7): 3137-3145.
[5] Ooshima M, Chiba A, Fukao T, et al. Design and analysis of permanent magnet-type bearingless motors[J]. IEEE Transaction on Industrial Electronics, 1996, 43(2): 292-299.
[6] Asama J, Natsume R, Fukuhara H, et al. Optimal suspension winding configuration in a homo-polar bearingless motor[J]. IEEE Transaction on Magnetics, 2012, 48(11): 2973-2976.
[7] Amemiya J, Chiba A, Dorrell D G, et al. Basic characteristics of a consequent-pole-type bearingless motor[J]. IEEE Transactions on Industrial Electronics, 2005, 41(1): 82-89.
[8] Yamada T, Nakano Y, Asama J, et al. Outer rotor consequent-pole bearingless motor with improved start-up characteristics[J]. IEEE Transaction on Magnetics, 2008, 44(11): 4273-4276.
[9] Asano Y, Mizuguchi A, Amada M, et al. Development of a four-axis actively controlled consequent-pole-
type bearingless motor[J]. IEEE Transactions on Industry Applications, 2009, 45(4): 1378-1386.
[10] Sugimoto H, Kamiya K, Nakamura R, et al. Design and basic characteristics of multi-consequent-pole bearingless motor with bi-tooth main poles[J]. IEEE Transactions on Magnetics, 2009, 45(6): 2791-2794.
[11] Asama J, Kanehara D, Oiwa T, et al. Development of a compact centrifugal pump with a two-axis actively positioned consequent-pole bearingless motor[J]. IEEE Transactions on Industry Applications, 2014, 50(1): 288-295.
[12] Asama J, Kawata R, Tamura T, et al. Reduction of force interference and performance improvement of a consequent-pole bearingless motor[J]. Precision Engineering, 2012, 36(1): 10-18.
[13] 周晓燕, 李琛, 仇志坚, 等. 基于摄动法的交替极永磁电机偏心磁场解析计算[J]. 电工技术学报, 2013, 28(9): 321-331. Zhou Xiaoyan, Li Chen, Qiu Zhijian, et al. Magnetic field calculation for consequent-pole motor with rotor eccentricity based on perturbation method[J]. Transactions of China Electrotechnical Society, 2013, 28(9): 321-331.
[14] 李琛, 章跃进, 仇志坚. 无轴承交替极永磁电机空载气隙磁场全局解析模型[J]. 电工技术学报, 2012, 27(11): 104-110. Li Chen, Zhang Yuejin, Qiu Zhijian. Exact analytical model for the no-load air-gap magnetic field calculation in consequent-pole permanent magnet bearingless motor[J]. Transactions of China Electro-
technical Society, 2012, 27(11):104-110.
[15] 仇志坚, 邓智泉, 章跃进. 交替极永磁无轴承电机的直接悬浮力控制[J]. 电工技术学报, 2011, 26(9)： 94-99. Qiu Zhijian, Deng Zhiquan, Zhang Yuejin. Direct levitation force control of a consequent-pole permanent magnet bearingless motor[J]. Transactions of China Electrotechnical Society, 2012, 27(11): 94-99.