转子动能为外环控制量的永磁同步电动机双闭环矢量控制策略

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (74297 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract At first, the energy exchange relations in the permanent magnet synchronous motor (PMSM) control system are analyzed in this paper. Then a novel strategy with two closed loops is proposed, in which the current loop is the inner loop, and the rotor kinetic energy serves as the outer loop. The influence of load to the motor control strategies is analyze, a simple and effective load estimation scheme is proposed, the control the motor with load is approximately equivalent to that counterpart without load. The theoretical basis and the design procedure of the loops are also given. The feasibility of the vector control strategy based on rotor kinetic energy is verified by experiments. Compared to the traditional vector control strategy, the vector control strategy based on rotor kinetic energy has a better dynamic performance. At last, an effective estimation solution to the load variation is put forward.

Key words： Permanent magnet synchronous motor rotor kinetic energy vector control load estimation

Received: 27 September 2013 Published: 20 October 2015

PACS:

TM343

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Anbang
	Jiang Weidong
	Wang Qunjing
	She Yangyang

Cite this article:

Wang Anbang,Jiang Weidong,Wang Qunjing等. Dual Closed Loop Vector Control Strategy for PMSM Using Rotor Kinetic Energy as the Outer Loop Controlling Parameter[J]. Transactions of China Electrotechnical Society, 2015, 30(18): 112-120.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2015/V30/I18/112

[1] 韩建群, 郑萍. 一种用于电动汽车的永磁同步电机直接转矩控制的简化方法[J]. 电工技术学报, 2009, 24(1): 76-80. Han Jianqun, Zheng Ping. A simplified direct torque control method of PMSM applied in electric vehicles[J]. Transactions of China Electrotechnical Society, 2009, 24(1): 76-80.
[2] Estima J O, Marques Cardoso A J. Efficiency analysis of drive train topologies applied to electric/hybrid vehicles[J]. IEEE Transactions on Vehicular Technology, 2012, 61(3): 1021-1031.
[3] 李耀华, 马建, 刘晶郁, 等. 电动汽车用永磁同步电机直接转矩控制电压矢量选择策略[J]. 电机与控制学报, 2012, 16(4): 43-49. Li Yaohua, Ma Jian, Liu Jingyu,et al. Voltage vector selection strategy of the DTC for PMSM used in electrical vehicle[J]. Electric Machine and Control, 2012, 16(4): 43-49.
[4] 余佩倡, 吴峻, 周文武. 永磁同步电机矢量控制系统设计[J]. 电力电子技术, 2011, 45(11): 105-107. Yu Peichang, Wu Jun, Zhou Wenwu. The design of vector control system of PMSM based on TMS302F28335[J]. Power Electronics, 2011, 45(11): 105-107.
[5] 曹瑜, 王旭东. 一种改进的永磁同步电机矢量控制系统的研究[J]. 电力电子技术, 2012, 46(5): 54-56. Cao Yu, Wang Xudong. Research on an improved PMSM vector control system[J]. Power Electronics, 2012, 46(5): 54-56.
[6] 李耀华, 吴俊, 郭巧娟, 等. 永磁同步电机矢量控制的两种实现方法比较[J]. 微电机, 2012, 45(1): 25-28. Li Yaohua, Wu Jun, Guo Qiaojuan,et al. Comparison of two ways to implement the FOC for PMSM[J]. Micromotor, 2012, 45(1): 25-28.
[7] Mathapati S, Bocker J. Analytical and offline approach to select optimal hysteresis bands of DTC for PMSM[J]. IEEE Transactions on Industrial Electronics, 2013, 60(3): 885-895.
[8] Xia Changliang, Zhao Jiaxin, Yan Yan, et al. A novel direct torque control of matrix converter-fed pmsm drives using duty cycle control for torque ripple reduction[J]. IEEE Transactions on Industrial Electronics, 2014, 60(6): 2700-2713.
[9] 邱鑫, 黄文新, 杨建飞, 等. 一种基于转矩角的永磁同步电机直接转矩控制[J]. 电工技术学报, 2013, 28(3): 56-62. Qiu Xin, Huang Wenxin, Yang Jianfei, et al. A direct torque control strategy based on torque angle for permanent magnet synchronous motors[J]. Transactions of China Electrotechnical Society, 2013, 28(3): 56-62.
[10] Aguirre M, Calleja C, Lopez-de-Heredia A, et al. FOC and DTC comparison in PMSM for railway traction application[C]. Proceedings of the Power Electronics and Applications 2011: 1-10.
[11] Jin H Z, Lee J M. An RMRAC current regulator for permanent magnet synchronous motor based on statistical model interpretation[J]. IEEE Transactions on Industrial Electronics, 2009, 56(1): 169-177.
[12] 黄科元, 周滔滔, 黄守道, 等. 永磁伺服系统基于微分自适应补偿的陕速无超调控制策略[J]. 电工技术学报, 2014, 29(9): 138-144. Huang Keyuan, Zhou Taotao, Huang Shoudao, et al. Overshoot and fast response control of PMSM servo system based on differential adaptive compensation[J]. Transactions of China Electrotechnical Society, 2014, 29(9): 138-144.
[13] Corradini M L, Ippoliti G, Longhiss, et al. A quasi-sliding mode approach for robust control and speed estimation of PM synchronous motors[J]. IEEE Transactions on Industrial Electronics, 2012, 59(2): 1096-1104.
[14] Zhang Xiaoguang, Sun Lizhi, Zhao Ke, et al. Nonlinear speed control for PMSM system using sliding-mode control and disturbance compensation techniques[J]. IEEE Transactions on Power Electronics, 2013, 28(3): 1358-1365.
[15] Lin F J, Hung Y C, Hwang J C, et al. Fault-tolerant control of a six-phase motor drive system using a takagi-sugeno-kang type fuzzy neural network with asymmetric membership function[J]. IEEE Trans- actions on Power Electronics, 2013, 28(7): 3557- 3572.
[16] Han H C, Jung J W. Discrete-time fuzzy speed regulator design for pm synchronous motor[J]. IEEE Transactions on Industrial Electronics, 2013, 60(2): 600-607.
[17] 王恩德, 黄声华. 三相电压型PWM整流器的新型双闭环控制策略[J]. 中国电机工程学报, 2012, 32(15): 24-30. Wang Ende, Huang Shenghua. A novel double closed loops control of the three-phase voltage-sourced PWM rectifier[J]. Proceedings of the CSEE, 2012, 32(15): 24-30.
[18] 姜卫东, 吴志清, 胡杨. 直流电容储能反馈和负载功率前馈的Boost变换器控制策略[J]. 电力自动化设备, 2014, 34(8): 103-107. Jiang Weidong,Wu Zhiqing,Hu Yang. Control strategy based on DC-link capacitor energy feedback and load power feedforward of Boost converter[J]. Electric Power Automation Equipment, 2014, 34(8): 103-107.