基于响应面法的永磁转子偏转式三自由度电动机结构参数的优化设计

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (3073 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The spin rotation and deflection torques of the three-DOF deflection type PM motor are selected as the optimization object.To improve the optimization efficiency,firstly,the Taguchi algorithm is applied to select the structural parameters that affect the motor’s torque greatly and simplifies the optimization process effectively.Then,based on the central composite design (CCD),the sample point group is constructed,and the response surface numerical model equation is built by the finite element method tests.The impact on the response value by the interaction between factors of response surface model is analyzed and derived.The results show that the optimization method is efficient and reliable and the experimental results can be predicted by the response surface functions with the structure parameters effectively optimized.

Key words： Permanent magnet motor multi-degree-of-freedom finite element method response surface methodology torque

Received: 28 December 2014 Published: 14 September 2015

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Li Zheng
	Zhang Lu
	Wang Qunjing
	Lun Qingqing

Cite this article:

Li Zheng,Zhang Lu,Wang Qunjing等. Optimal Design of Structure Parameters of Three-DOF Deflection Type PM Motor Based on Response Surface Methodology[J]. Transactions of China Electrotechnical Society, 2015, 30(13): 134-142.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2015/V30/I13/134

[1] Li J T,Liu Z J,Jabbar M A,et al.Design optimization for cogging torque minimization using response surface methodology[J].IEEE Transactions on Mechatronics,2004,40(2):1176-1179.
[2] Gao X K,Low T S,Liu Z J,et al.Robust design for torque optimization using response surface methodology[J].IEEE Transactions on Magnetics,2002,38(2):1141-1144.
[3] Vadde K K,Syrotiuk V R,Montgomery D C.Optimizing protocol interaction using response surface methodology[J].IEEE Transactions on Mobile Computing,2006,5(6):627-639.
[4] Yan L,Chen I M,Lim C K,et al.Design and analysis of a permanent magnet spherical actuator[J].IEEE/ASME Transactions on Mechatronics,2008,13(2):239-248.
[5] Li Zheng.Robust control of PM spherical stepper motor based on neural networks[J].IEEE Transactions on Industrial Electronics,2009,56(8):2945-2954.
[6] Lee J S,Kim D,Baek S,et al.Newly structured double excited two-degree-of-freedom motor for security camera[J].IEEE Transactions on Magnetics,2008,44(11):4041-4044.
[7] 李争,孙克军,王群京,等.一种多自由度电机三维磁场分析及永磁体设计[J].电机与控制学报,2012,16(7):65-71.
Li Zheng,Sun Kejun,Wang Qunjing,et al.3D magnetic field analysis and permanent magnet design of a M-DOF motor[J].Electric Machines and Control,2012,16(7):65-71.
[8] Lee B H,Hong J P,Lee J H.Optimum design criteria for maximum torque and efficiency of a line-start permanent-magnet motor using response surface methodology and finite element method[J].IEEE Transactions on Magnetics,2012,48(2):863-866.
[9] 王雅玲,徐衍亮,刘西全.双定子永磁同步发电机(Ⅰ)—结构原理及其响应面法设计[J].电工技术学报,2011,26(7):167-172.
Wang Yaling,Xu Yanliang,Liu Xiquan.Dual-stator permanent magnet synchronous generator (Ⅰ)—schematic structure and design based on response surface method[J].Transactions of China Electrotechnical Society,2011,26(7):167-172.
[10]李争,张玥,王群京,等.永磁转子偏转式三自由度电机磁场解析建模与分析[J].中国电机工程学报,2013,33(S1):219-225.
Li Zheng,Zhang Yue,Wang Qunjing,et al.Analytical modeling and analysis of magnetic field for a nover 3-DOF deflection type motor[J].Proceedings of the CSEE,2013,33(S1):219-225.
[11]信建国,夏长亮,李洪凤,等.基于解析模型的永磁球形电机永磁体优化设计[J].电工技术学报,2013,28(7):87-95.
Xin Jianguo,Xia Changliang,Li Hongfeng,et al.Optimization design of permanent magnet array for spherical motor based on analytical model[J].Transactions of China Electrotechnical Society,2013,28(7):87-95.
[12]Li Zheng,Zhang Yue,Wang Xinxin,et al.Design and comparison of a novel 3-DOF deflection type permanent magnet actuator[J].International Journal of Applied Electromagnetics and Mechanics,2014,46(1):229-242.
[13]李争,王咏涛,葛荣亮,等.永磁球形多自由度电机研究进展综述[J].微电机,2011,44(9):66-70.
Li Zheng,Wang Yongtao,Ge Rongliang,et al.The summary and latest research of PM spherical M-DOF motor[J].Micromotors,2011,44(9):66-70.
[14]兰志勇,杨向宇,王芳媛,等.Taguchi方法在内嵌式正弦波永磁同步电机优化设计中的应用[J].电工技术学报,2011,26(12):37-42.
Lan Zhiyong,Yang Xiangyu,Wang Fangyuan,et al.Application for optimal designing of sinusoidal interior permanent magnet synchronous motors by using the taguchi method[J].Transactions of China Electrotechnical Society,2011,26(12):37-42.
[15]Lee J H.Optimum shape design solution of flux switching motor using response surface methodology and new type winding[J].IEEE Transactions on Magnetics,2012,48(4):1637-1640.
[16]Kim S I,Hong J P,Kim Y K,et al.Optimal design of slotless-type PMLSM considering multiple responses by response surface methodology[J].IEEE Transactions on Magnetics,2006,42(4):1219-1222.
[17]Lee J Y,Kim S I,Hong J P,et al.Optimal design of superconducting motor to improve power density using 3D EMCN and response surface methodology[J].IEEE Transactions on Applied Superconductivity,2006,16(2):1819-1822.
[18]Kim Y K,Hong J P,Hur J.Torque characteristic analysis considering the manufacturing tolerance for electric machine by stochastic response surface method[J].IEEE Transactions on Industry Applications,2003,39(3):713-719.
[19]Cheng Y,Xu G,Zhu D,et al.Thermal analysis for indirect liquid cooled multichip module using computational fluid dynamic simulation and response surface methodology[J].IEEE Transactions on Components and Packaging Technologies,2006,29(1):39-46.
[20]Jabbar M A,Jia W,Yang J.Simulation and optimization of an electrostatic microactuator for HDD head positioning[J].IEEE Transactions on Magnetics,2004,40(4):3174-3176.
[21]管宇,黄必恒,吴志松,等.关于正交试验设计的重复试验问题[J].浙江林学院学报,2003,20(4):85-90.
Guan Yu,Huang Biheng,Wu Zhisong,et al.Questions about repeated trials of orthogonal test design[J].Journal of Zhejiang Forestry College,2003,20(4):85-90.