永磁型无轴承薄片电机轴向力建模及控制策略

doi:10.19595/j.cnki.1000-6753.tces.250301

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (9684 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The load form of the bearingless permanent magnet slice motor (BPMSM) is complex and changeable. For example, during the operation of the magnetic suspension pump, the imbalance of the force acting on the surface of the impeller by the liquid flow causes the rotor to produce displacement or torsion in the axial direction. According to the principle of minimum reluctance, axial force and axial torque are generated between the stator and the rotor. However, the axial passive levitation structure has weak axial force stiffness, and its stability is insufficient. Therefore, this paper establishes a mathematical model of the axial force and analyzes its dynamic and static characteristics. A stiffness adjustment scheme is proposed to control the axial motion of the rotor. Finally, the effectiveness of the proposed axial force stiffness control strategy is verified by simulation and experiment.
(1) The magnetic circuit equivalent model of BPMSM is established, including the stator magnetic circuit, the air gap magnetic circuit, and the rotor magnetic circuit. Considering the influence of winding current, the expression for the rotor axial passive levitation force is derived using the virtual work method.
(2) The influencing factors of axial force are analyzed through the mathematical model and finite element simulation. In a specific range, the axial force of BPMSM is inversely proportional to the length of the air gap, and the axial force is proportional to the rotor radius and the magnetization length of the permanent magnet. The axial force direction of BPMSM is opposite to the axial displacement direction, and the amplitude increases with the increase of axial displacement. With the rise in displacement, the increment in the axial force amplitude gradually decreases. When the current of the direct axis armature is greater than zero, the axial force increases, and vice versa. When the current is small, the change in the axial force amplitude is proportional to the absolute value of the current. The accuracy of the mathematical model of axial force established in this paper is verified by finite element simulation and experiment. Under the full working conditions of displacement and current, the error between the established model and simulation is less than 9.39%, and the error between the established model and experiment is less than 7.5%.
(3) According to the characteristic relationship between axial force and d-axis armature current, an axial force stiffness regulation strategy is proposed to enhance axial suspension stability and disturbance immunity. Firstly, according to the simplified axial force model, a new axial force stiffness expression is obtained. Then, by adjusting the relationship between the armature current and the rotor vibration velocity, the damping force is generated to restrain the rotor axial vibration. Its implementation does not require additional structure or control winding. The simulation and experiment of BPMSM show that the axial control scheme based on stiffness regulation can effectively suppress axial vibration caused by disturbances or load changes and shorten the adjustment time for vibration attenuation.

Key words： Bearingless permanent magnet slice motor (BPMSM) axial force mathematical model stiffness regulation characteristic analysis

Received: 26 February 2025

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Li Zhenglong
	Wang Xiaolin
	Bao Xucong
	Fan Zhenxue
	Shi Tengrui

Cite this article:

Li Zhenglong,Wang Xiaolin,Bao Xucong等. Bearingless Permanent Magnet Slice Motor Axial Force Modeling and Control Strategy[J]. Transactions of China Electrotechnical Society, 2026, 41(4): 1236-1247.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.250301 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I4/1236

[1] Bao Xucong, Wang Xiaolin, Han Bingyang, et al.Eccentricity compensation for bearingless motor based on the tracking of the minimum antieccentric levitation current[J]. IEEE Transactions on Industrial Electronics, 2024, 71(4): 3494-3503.
[2] 王晓琳, 石滕瑞, 鲍旭聪. 基于频域拟合的无轴承永磁薄片电机径向悬浮力建模分析[J]. 电工技术学报, 2023, 38(2): 317-329.
Wang Xiaolin, Shi Tengrui, Bao Xucong.Accurate mathematical modeling of radial suspension force on bearingless permanent magnet slice motors based on frequency domain fitting[J]. Transactions of China Electrotechnical Society, 2023, 38(2): 317-329.
[3] 李健, 陈红, 李大伟, 等. 高速高功率密度无轴承永磁薄片电机设计与优化[J]. 电机与控制学报, 2024, 28(6): 171-180.
Li Jian, Chen Hong, Li Dawei, et al.Design and optimization of bearingless permanent magnet slice motors for high speed and high power density applications[J]. Electric Machines and Control, 2024, 28(6): 171-180.
[4] Kant K, Trumper D L.Extracorporeal blood pump driven by a novel bearingless split-tooth flux-reversal motor[J]. IEEE/ASME Transactions on Mechatronics, 2024, 29(1): 271-278.
[5] Sun Xiaodong, Chen Long, Yang Zebin.Overview of bearingless permanent-magnet synchronous motors[J]. IEEE Transactions on Industrial Electronics, 2013, 60(12): 5528-5538.
[6] 仇志坚, 马东旭, 魏康妮. 无轴承无刷直流电机悬浮控制特性优化分析[J]. 电工技术学报, 2019, 34(23): 4939-4947.
Qiu Zhijian, Ma Dongxu, Wei Kangni.Optimization analysis on suspension control characteristics of a bearingless brushless DC motor[J]. Transactions of China Electrotechnical Society, 2019, 34(23): 4939-4947.
[7] 禹春敏, 邓智泉, 梅磊, 等. 基于精确磁路的新型混合型轴向-径向磁悬浮轴承研究[J]. 电工技术学报, 2021, 36(6): 1219-1228.
Yu Chunmin, Deng Zhiquan, Mei Lei, et al.Research of new hybrid axial-radial magnetic bearing based on accurate magnetic circuit[J]. Transactions of China Electrotechnical Society, 2021, 36(6): 1219-1228.
[8] Pei Tonghao, Li Dawei, Liu Jiayun, et al.Review of bearingless synchronous motors: principle and topo- logy[J]. IEEE Transactions on Transportation Elec- trification, 2022, 8(3): 3489-3502.
[9] Bao Xucong, Wang Xiaolin, Li Zhenglong, et al.Optimized design of levitation current regulator for bearingless motor[J]. IEEE Transactions on Power Electronics, 2023, 38(12): 15481-15493.
[10] 丁伟成. 离心泵与轴流泵: 原理及水力设计[M]. 北京: 机械工业出版社, 1981.
[11] 徐博远. 片状转子磁悬浮关键技术研究[D]. 南京: 南京航空航天大学, 2023.
Xu Boyuan.Research on key technology of magnetic levitation of sheet rotor[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2023.
[12] Sugimoto H, Uemura Y, Chiba A, et al.Design of homopolar consequent-pole bearingless motor with wide magnetic gap[J]. IEEE Transactions on Magnetics, 2013, 49(5): 2315-2318.
[13] Puentener P, Hoffmann F, Menzi D, et al.Homopolar bearingless slice motor in temple design[C]//2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 2017: 1-7.
[14] Asama J, Asami T, Imakawa T, et al.Effects of permanent-magnet passive magnetic bearing on a two-axis actively regulated low-speed bearingless motor[J]. IEEE Transactions on Energy Conversion, 2011, 26(1): 46-54.
[15] Fang Jiancheng, Le Yun, Sun Jinji, et al.Analysis and design of passive magnetic bearing and damping system for high-speed compressor[J]. IEEE Transa- ctions on Magnetics, 2012, 48(9): 2528-2537.
[16] Sugimoto H, Tanaka S, Chiba A, et al.Principle of a novel single-drive bearingless motor with cylindrical radial gap[J]. IEEE Transactions on Industry Appli- cations, 2015, 51(5): 3696-3706.
[17] Sugimoto H, Tanaka S, Chiba A.A vibration redu- ction method of one-axis actively position regulated single-drive bearingless motor with repulsive passive magnetic bearings[J]. IEEE Transactions on Industry Applications, 2016, 52(1): 181-188.
[18] 武谷雨. 轴向主动控制无轴承电机基础研究[D]. 南京: 南京航空航天大学, 2017.
Wu Guyu.Basic research on axial actively regulated bearingless motor[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2017.
[19] Wang Zelin, Cao Xin, Deng Zhiquan, et al.High integrated methodology and evaluation for switched- reluctance type bearingless motors with five degree of freedom magnetic levitation[J]. IEEE Transactions on Energy Conversion, 2023, 38(2): 759-770.
[20] Asama J, Hamasaki Y, Oiwa T, et al.Proposal and analysis of a novel single-drive bearingless motor[J]. IEEE Transactions on Industrial Electronics, 2013, 60(1): 129-138.
[21] 秦伟, 马育华, 张洁龙, 等. 不均匀气隙工况下轴向磁通永磁电动式磁悬浮电机的磁场与力特性分析[J]. 电工技术学报, 2023, 38(4): 889-902.
Qin Wei, Ma Yuhua, Zhang Jielong, et al.Characteristic and magnetic field analysis of an axial flux permanent magnets maglev motor with non-uniform air gap[J]. Transactions of China Electrotechnical Society, 2023, 38(4): 889-902.
[22] 佟文明, 杜绍雨, 贾建国, 等. 基于改进复相对磁导函数的开槽轴向磁通永磁电机气隙磁场解析模型[J]. 电工技术学报, 2024, 39(24): 7700-7711.
Tong Wenming, Du Shaoyu, Jia Jianguo, et al.Analytical model of air-gap magnetic field of slotted axial flux permanent magnet motor based on improved complex relative permeance function[J]. Transactions of China Electrotechnical Society, 2024, 39(24): 7700-7711.
[23] Ding Qiang, Deng Zhiquan, Wang Xiaolin, et al.Principle and design of a novel Lorenz force type bearingless motor with single-axis actively regulated capability[J]. Journal of Electrical Engineering and Technology, 2016, 11(5): 1253-1264.
[24] 赵攀, 王宇, 张艺. 单霍尔故障下无轴承永磁薄片电机径向位移容错检测[J]. 电工技术学报, 2024, 39(15): 4794-4805.
Zhao Pan, Wang Yu, Zhang Yi.Fault tolerant dete- ction of radial displacement of bearingless permanent magnet slice motor under single hall fault[J]. Transactions of China Electrotechnical Society, 2024, 39(15): 4794-4805.