基于多核相关向量机优化模型的锂离子电池容量在线估算

doi:10.19595/j.cnki.1000-6753.tces.211820

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2552 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract With the large-scale promotion and popularization of electric vehicles, power lithium-ion batteries are widely employed owing to their high energy density, long cycle life, and environmental friendliness. However, the performance of power lithium-ion batteries decreases with continuous use, leading to the increasing range anxiety and safety anxiety of electric vehicles, which requires the prognostic and health management of power batteries. Therefore, the development of key methods for battery management systems has become a prerequisite for electric vehicles. Accurate online capacity estimation of power batteries is one of the core functions of the battery management system for prognostic and health management, which is of great significance to improve the refined management of batteries in electric vehicles. During the driving process of electric vehicles, power batteries in electric vehicles are affected by various external factors, such as noise and vibration. Therefore, the battery capacity estimation based on the discharging process is vulnerable to complex factors in dynamic discharging conditions. To solve this problem of online capacity estimation of power batteries in electric vehicles, this study proposes a method for battery capacity estimation during the charging process. First, based on the partial charging data of the power battery, the incremental capacity analysis method is used to obtain its charging incremental capacity curve. To eliminate the influence of the noise of the sampling process on the differential process, a locally weighted scatterplot smoothing method is proposed to smooth and denoise the original incremental capacity analysis to obtain a smooth curve with a clear boundary. Further, based on the processed charging incremental capacity curve, the maximum peak and area on the curve are extracted as the two aging features to characterize the battery capacity degradation. The validity of the aging features based on the partial capacity increment curves is verified by the correlation analysis, and the correlation coefficients show that the extracted aging features can effectively characterize the battery capacity degradation. Then, a multi-kernel relevance vector machine optimization model with the aging features as the input and the battery capacity as the output is established. Meanwhile, the optimal kernel function weights and kernel parameters in the multi-kernel relevance vector machine are determined by the grey wolf optimization to improve the global and local learning and generalization capability of the multi-kernel relevance vector machine, then, the battery capacity is estimated online by combining the online extracted aging features. Finally, a joint simulation using Matlab and LabVIEW is performed to establish a simulated hardware-in-the-loop battery management system based on the multi-kernel relevance vector machine optimization model. Meanwhile, the developed battery management system is also validated by the University of Maryland single-cell battery aging datasets and the Dalian University of Technology battery pack aging datasets. The estimation results show that the proposed online battery capacity estimation method based on the multi-kernel relevance vector machine optimization model can achieve accurate battery capacity estimation with a maximum estimation error of 2.3% or less for both single-cell and battery pack capacity estimation. The proposed method provides a new research idea for the algorithm development of a battery management system.

Key words： Li-ion battery capacity estimation multi-kernel relevance vector machine grey wolf optimizer battery-in-loop battery management system

Received: 10 November 2021

PACS:

TM911

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.211820 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I7/1713

[1] 朱晓庆, 王震坡, Hsin Wang, 等. 锂离子动力电池热失控与安全管理研究综述[J]. 机械工程学报, 2020, 56(14): 91-118.
Zhu Xiaoqing, Wang Zhenpo, Wang H, et al.Review of thermal runaway and safety management for lithium-ion traction batteries in electric vehicles[J]. Journal of Mechanical Engineering, 2020, 56(14): 91-118.
[2] 韩乔妮, 姜帆, 程泽. 变温度下IHF-IGPR框架的锂离子电池健康状态预测方法[J]. 电工技术学报, 2021, 36(17): 3705-3720.
Han Qiaoni, Jiang Fan, Cheng Ze.State of health estimation for lithium-ion batteries based on the framework of IHF-IGPR under variable temperature[J]. Transactions of China Electrotechnical Society, 2021, 36(17): 3705-3720.
[3] Lü Zhiqiang, Gao Renjing, Chen Lin.Li-ion battery state of health estimation and remaining useful life prediction through a model-data-fusion method[J]. IEEE Transactions on Power Electronics, 2021, 36(6): 6228-6240.
[4] 杨胜杰, 罗冰洋, 王菁, 等. 基于容量增量曲线峰值区间特征参数的锂离子电池健康状态估算[J]. 电工技术学报, 2021, 36(11): 2277-2287.
Yang Shengjie, Luo Bingyang, Wang Jing, et al.State of health estimation for lithium-ion batteries based on peak region feature parameters of incremental capacity curve[J]. Transactions of China Electrotechnical Society, 2021, 36(11): 2277-2287.
[5] Xiong Rui, Li Linlin, Li Zhirun, et al.An electrochemical model based degradation state identification method of lithium-ion battery for all-climate electric vehicles application[J]. Applied Energy, 2018, 219: 264-275.
[6] Li J, Adewuyi K, Lotfi N, et al.A single particle model with chemical/mechanical degradation physics for lithium ion battery state of health (SOH) estimation[J]. Applied Energy, 2018, 212: 1178-1190.
[7] Lü Zhiqiang, Gao Renjing.A model-based and data-driven joint method for state‐of‐health estimation of lithium‐ion battery in electric vehicles[J]. International Journal of Energy Research, 2019, 43: 7956-7969.
[8] Chen Cheng, Xiong Rui, Shen Weixiang.A lithium-ion battery-in-the-loop approach to test and validate multiscale dual h infinity filters for state-of-charge and capacity estimation[J]. IEEE Transactions on Power Electronics, 2018, 33(1): 332-342.
[9] Afshari H, Attari M, Ahmed R, et al.Reliable state of charge and state of health estimation using the smooth variable structure filter[J]. Control Engineering Practice, 2018, 77: 1-14.
[10] 李超然, 肖飞, 樊亚翔, 等. 基于卷积神经网络的锂离子电池SOH估算[J]. 电工技术学报, 2020, 35(19): 4106-4119.
Li Chaoran, Xiao Fei, Fan Yaxiang, et al.An approach to lithium-ion battery SOH estimation based on convolutional neural network[J]. Transactions of China Electrotechnical Society, 2020, 35(19): 4106-4119.
[11] You G W, Park S, Oh D.Diagnosis of electric vehicle batteries using recurrent neural networks[J]. IEEE Transactions on Industrial Electronics, 2017, 64(6): 4885-4893.
[12] Lü Zhiqiang, Gao Renjing.Li-ion battery state of health estimation through gaussian process regression with Thevenin model[J]. International Journal of Energy Research, 2020, 44(13): 10262-10281.
[13] Chen Lin, Wang Huimin, Liu Bohao, et al.Battery state-of-health estimation based on a metabolic extreme learning machine combining degradation state model and error compensation[J]. Energy, 2021, 215: 119078.
[14] 戴海峰, 姜波, 魏学哲, 等. 基于充电曲线特征的锂离子电池容量估计[J]. 机械工程学报, 2019, 55(20): 52-59.
Dai Haifeng, Jiang Bo, Wei Xuezhe, et al.Capacity estimation of lithium-ion batteries based on charging curve features[J]. Journal of Mechanical Engineering, 2019, 55(20): 52-59.
[15] 来鑫, 秦超, 郑岳久, 等. 基于恒流充电曲线电压特征点的锂离子电池自适应容量估计方法[J]. 汽车工程, 2019, 41(1): 1-6, 20.
Lai Xin, Qin Chao, Zheng Yuejiu, et al.An adaptive capacity estimation scheme for lithium-ion battery based on voltage characteristic points in constant-current charging curve[J]. Automotive Engineering, 2019, 41(1): 1-6, 20.
[16] Lü Zhiqiang, Gao Renjing, Li Xiaoyu.A partial charging curve-based data-fusion-model method for capacity estimation of Li-ion battery[J]. Journal of Power Sources, 2021, 483: 229131.
[17] 刘月峰, 赵光权, 彭喜元. 多核相关向量机优化模型的锂电池剩余寿命预测方法[J]. 电子学报, 2019, 47(6): 1285-1292.
Liu Yuefeng, Zhao Guangquan, Peng Xiyuan.A lithium-ion battery remaining using life prediction method based on multi-kernel relevance vector machine optimized model[J]. Acta Electronica Sinica, 2019, 47(6): 1285-1292.
[18] 韦海燕, 陈静, 王惠民, 等. 新陈代谢灰色粒子滤波实现电池剩余寿命预测[J]. 电工技术学报, 2020, 35(6): 1181-1188.
Wei Haiyan, Chen Jing, Wang Huimin, et al.Remaining useful life prediction of battery using metabolic grey particle filter[J]. Transactions of China Electrotechnical Society, 2020, 35(6): 1181-1188.
[19] Li Xiaoyu, Yuan Changgui, Li Xiaohui, et al.State of health estimation for Li-ion battery using incremental capacity analysis and gaussian process regression[J]. Energy, 2020, 190: 116467.
[20] Li Xiaoyu, Wang Zhenpo, Zhang Lei, et al. State-of-health estimation for Li-ion batteries by combing the incremental capacity analysis method with grey relational analysis[J]. Journal of Power Sources, 2019, 410-411: 106-114.
[21] Birkl C, Roberts M, Mcturk E, et al.Degradation diagnostics for lithium ion cells[J]. Journal of Power Sources, 2017, 341: 373-386.
[22] Han Xuebing, Lu Languang, Zheng Yuejiu, et al.A review on the key issues of the lithium ion battery degradation among the whole life cycle[J]. eTransportation, 2019, 1: 100005.
[23] Schuster S, Brand M, Campestrini C, et al.Correlation between capacity and impedance of lithium-ion cells during calendar and cycle life[J]. Journal of Power Sources, 2016, 305: 191-199.
[24] Lyu Zhiqiang, Wang Geng, Gao Renjing.Li-ion battery prognostic and health management through an indirect hybrid model[J]. Journal of Energy Storage, 2021, 42: 102990.
[25] Mirjalili S, Mirjalili S, Lewis A.Grey wolf optimizer[J]. Advances in Engineering Software, 2014, 69: 46-61.