基于全耦合电容模型的双发射电场耦合式无线电能传输系统

doi:10.19595/j.cnki.1000-6753.tces.180927

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (6637 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The traditional capacitive power transfer (CPT) system utilizes single-phase H-bridge inverter and single transmitter to transfer power. Because of the CPT system is limited by the capacity constraints of the inverter, so that it may not be able to meet the high power requirement of rail transit applications. To realize the system’s high power output, dual transmitting and single receiving terminal CPT system is proposed in this paper by paralleling two inverters so that the total capacity of input power is enhanced. The six-plate capacitive coupler model is simplified as three-port circuit, and finite element analysis (FEA) by Maxwell is used to simulate the coupling capacitors. Considering the effect of mutual coupling between two transmitting mechanisms, this paper presents the resonant circuit parameter configuration method. At last, the system’s working principle is analyzed in detail, and an experiment is designed at the working frequency of 500 kHz. The DC-DC efficiency is up to 90.6% when the output power is 1.47 kW. The current flowing through the switching device in the dual transmitters is half of that in the single transmitter with the same power output in the CPT system. The experimental results show that the proposed methods are effective and feasible.

Key words： Capacitive power transfer full-capacitive coupling model dual transmitting terminals high power

Received: 30 May 2018 Published: 20 September 2019

PACS:

TM724

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Hu Jie
	Chen Lihua
	Luo Bo
	Shi Rui
	Mai Ruikun

Cite this article:

Hu Jie,Chen Lihua,Luo Bo等. Electric Field Coupled Power Transmission System with Dual Transmitting Terminals Based on Full-Capacitive Coupling Model[J]. Transactions of China Electrotechnical Society, 2019, 34(17): 3542-3551.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.180927 OR https://dgjsxb.ces-transaction.com/EN/Y2019/V34/I17/3542

[1] 苏玉刚, 徐健, 谢诗云, 等. 电场耦合型无线电能传输系统调谐技术[J]. 电工技术学报, 2013, 28(11): 189-194.
Su Yugang, Xu Jian, Xie Shiyun, et al.A tuning technology of electrical-field coupled wireless power transfer system[J]. Transactions of China Electrotechnical Society, 2013, 28(11): 189-194.
[2] 麦瑞坤, 陆立文, 李勇, 等. 一种采用最小电压与最大电流跟踪的IPT系统动态调谐方法[J]. 电工技术学报, 2015, 30(19): 32-38.
Mai Ruikun, Lu Liwen, Li Yong, et al.Dynamic resonant compensation approach based on minimum voltage and maximum current tracking for IPT system[J]. Transactions of China Electrotechnical Society, 2015, 30(19): 32-38.
[3] 马林森, 李砚玲, 麦瑞坤, 等. 新型感应式电能传输系统高效拾取机构的仿真设计[J]. 电工技术学报, 2015, 30(增刊1): 496-500.
Ma Linsen, Li Yanling, Mai Ruikun, et al.Simulation design of an efficient new type pickup structure in inductive power transfer system[J]. Transactions of China Electrotechnical Society, 2015, 30(S1): 496-500.
[4] 罗博, 陈丽华, 李勇, 等. 基于滑模控制的感应耦合电能传输系统输出电压控制研究[J]. 电工技术学报, 2017, 32(23): 235-242.
Luo Bo, Chen Lihua, Li Yong, et al.Investigation of output voltage control for the inductive power transfer system based on sliding mode control theory[J]. Transactions of China Electrotechnical Society, 2017, 32(23): 235-242.
[5] Zheng H, Tnay K, Alami N, et al.Contactless power couplers for respiratory devices[C]//Proceedings of 2010 IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, Qingdao, China, 2010:155-160.
[6] Rozario D, Pathipati V K, Ram A, et al.Modified resonant converters for contactless capacitive power transfer systems used in EV charging applications[C]// IECON 2016-42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, Italy, 2016: 4510-4517.
[7] Shmilovitz D, Ozeri S, M Ehsani M. A resonant LED driver with capacitive power transfer[C]//IEEE Applied Power Electronics Conference and Exposition- APEC, Fort Worth, USA, 2014: 1384-1387.
[8] 麦瑞坤, 李勇, 何正友, 等. 无线电能传输技术及其在轨道交通中研究进展[J]. 西南交通大学学报, 2016, 51(3): 446-461.
Mai Ruikun, Li Yong, He Zhengyou, et al.Wireless power transfer technology and its research progress in rail transportation[J]. Journal of Southwest Jiaotong University, 2016, 51(3): 446-461.
[9] 范兴明, 莫小勇, 张鑫. 无线电能传输技术的研究现状与应用[J]. 中国电机工程学报, 2015, 35(10): 2584-2600.
Fan Xingming, Mo Xiaoyong, Zhang Xin.Research status and application of wireless power transmission technology[J]. Proceedings of the CSEE, 2015, 35(10): 2584-2600.
[10] 李思奇, 代维菊, 赵晗, 等. 电场耦合式无线电能传输的发展与应用[J]. 昆明理工大学学报:自然科学版, 2016, 41(3): 76-84.
Li Siqi, Dai Weiju, Zhao Han, et al.Development and application of electric-field coupled wireless power transfer[J]. Journal of Kunming University of Science and Technology: Natural Science Edition, 2016, 41(3): 76-84.
[11] Lu Fei, Zhang Hua, Hofmann H, et al.A double-sided LCLC-compensated capacitive power transfer system for electric vehicle charging[J]. IEEE Transactions on Power Electronics, 2015, 30(11): 6011-6014.
[12] Dai Jiejian, Ludois D C.A survey of wireless power transfer and a critical comparison of inductive and capacitive coupling for small gap applications[J]. IEEE Transactions on Power Electronics, 2015, 30(11): 6017-6029.
[13] Su Yugang, Xie Shiyun, Hu A P, et al.Capacitive power transfer system with a mixed-resonant topology for constant-current multiple-pickup applications[J]. IEEE Transactions on Power Electronics, 2017, 32(11): 8778-8786.
[14] Dai Jiejian, Ludois D C.Single active switch power electronics for kilowatt scale capacitive power transfer[J]. IEEE Journal of Emerging & Selected Topics in Power Electronics, 2015, 3(1): 315-323.
[15] Zhang Hua, Lu Fei, Hofmann H, et al.A 4-plate compact capacitive coupler design and LCL-compensated topology for capacitive power transfer in electric vehicle charging applications[J]. IEEE Transactions on Power Electronics, 2016, 31(12): 1.
[16] Chopra S, Bauer P.Driving range extension of EV with on-road contactless power transfer—a case study[J]. IEEE Transactions on Industrial Electronics, 2013, 60(1): 329-338.
[17] Huh J, Lee S, Park C, et al.High performance inductive power transfer system with narrow rail width for on-line electric vehicles[C]//Energy Conversion Congress and Exposition(ECCE), Atlanta, Georgia, USA, 2010: 647-651.
[18] Huang Liang, Hu A P.Defining the mutual coupling of capacitive power transfer for wireless power transfer[J]. Electronics Letters, 2015, 51(22): 1806-1807.
[19] Sinha S, Kumar A, Pervaiz S, et al.Design of efficient matching networks for capacitive wireless power transfer systems[C]//Control and Modeling for Power Electronics (COMPEL), Trondheim, Norway, 2016: 1-7.
[20] Hao Hao, Covic G A, T Boys J. A parallel topology for inductive power transfer power supplies[J]. IEEE Transactions on Power Electronics, 2014, 29(3): 1140-1151.
[21] Steigerwald R L.A comparison of half-bridge resonant converter topologies[J]. IEEE Transactions on Power Electronics, 1988, 3(2): 174-182.