Research on Inductive Power Transfer Method for Electrodynamic Suspension Maglev Train Based on Collector Coil Reuse
Yu Jiaqi1, Zhou Lingyun1, Liu Shunpan1, Wang Zhoulong2, Mai Ruikun1,3
1. School of the Electrical Engineering Southwest Jiaotong University Chengdu 611756 China; 2. Communication Signal Research Institute China Academy of Railway Sciences Group Co. Ltd Beijing 100081 China; 3. Tangshan Institute of Southwest Jiaotong University Tangshan 063000 China
Abstract：The power supply capacity of the linear generator is insufficient when the electrodynamic suspension (EDS) maglev train is at low speed or stationary. The contact power supply device is used as an additional power supply, resulting in wear, noise, and poor weather resistance, which affect running safety and ride comfort. In recent years, the development of inductive power transfer (IPT) technology has been relatively mature. It uses high-frequency magnetic fields as the medium to realize energy transmission between coupling coils, which has outstanding advantages such as contactless and flexible charging. However, to promote this technology in the maglev train, the IPT system has to be lighter and more compact. Therefore, this paper puts forward a reuse method of coil and circuit to build the integrated IPT system. By changing the coil and circuit structure, the suspension and collector coils, vacant when the train is at low speed, are used as the energy transmission channel. The proposed IPT system has little influence on the dead weight of the maglev train, and the mutual inductance of the coupler can be constant during the moving process. Combined with the LCC-S resonant compensation circuit, the stable output voltage is realized in the train movement and load change process. First, according to the characteristics of the multi-coil coupling of the electrodynamic suspension maglev train and different coil modes under different speeds, an integrated IPT system based on reconfigurable coils and circuits is proposed. The working modes of coils and circuits at different train speeds are analyzed in detail, and the structure and reconstruction strategy of coils and circuits are designed for contactless power transfer without affecting the original function of the train or increasing the weight of the train. Then, an equivalent circuit model of the coupler is established to clarify the mutual inductance fluctuation of the coupler during the moving process of the train. The Fourier series is used to characterize the relationship between the mutual inductance of the coils and the displacement, which simplifies the mutual inductance fluctuation analysis of the multi-input multi-output coupler. The results show that the multi-input and multi-output coupler constructed by reusing suspension coils and collector coils has the characteristics of constant mutual inductance during the moving process of the train. Moreover, to ensure the stable voltage output of the IPT system under different loads, an LCC-S resonant compensation circuit with a centralized compensation capacitor on the secondary side is proposed. Based on the mathematical model of the circuit topology, the compensation topology parameters for realizing the constant voltage output of the system are derived. Finally, based on the system coil structure and circuit topology, combined with the established mathematical model, a scaled experimental platform for the integrated IPT system of the EDS maglev train is designed and built. Through the experiment, the constant mutual inductance characteristics of the coupler and the constant voltage output characteristics of the system when the load changes are verified. In the moving process, the output voltage fluctuation is only 1.51%. When the output power varies from 300 W to 1 000 W, the output voltage fluctuation is 4.42%, the overall efficiency of the system is at least 83.75%, and the highest is 86.61%.
余嘉淇, 周凌云, 刘顺攀, 王州龙, 麦瑞坤. 基于集电线圈复用的电动磁浮列车感应式电能传输技术研究[J]. 电工技术学报, 2024, 39(4): 976-986.
Yu Jiaqi, Zhou Lingyun, Liu Shunpan, Wang Zhoulong, Mai Ruikun. Research on Inductive Power Transfer Method for Electrodynamic Suspension Maglev Train Based on Collector Coil Reuse. Transactions of China Electrotechnical Society, 2024, 39(4): 976-986.
[1] 王志涛, 蔡尧, 龚天勇, 等. 基于场-路-运动耦合模型的超导电动悬浮列车特性研究[J]. 中国电机工程学报, 2019, 39(4): 1162-1170. Wang Zhitao, Cai Yao, Gong Tianyong, et al.Study on characteristics of superconducting electric suspension train based on field-road-motion coupling model[J]. Proceedings of the CSEE, 2019, 39(4): 1162-1170. [2] 胡道宇, 冯馨月, 张志华. 超导电动悬浮系统阻尼特性研究[J]. 中国电机工程学报, 2021, 41(13): 4679-4687, 28. Hu Daoyu, Feng Xinyue, Zhang Zhihua.Study on the damping characteristics of superconducting electrody- namic suspension system[J]. Proceedings of the CSEE, 2021, 41(13): 4679-4687, 28. [3] 王一宇, 蔡尧, 宋旭亮, 等. 零磁通式电动悬浮等效模拟系统的特性分析与实验[J]. 电工技术学报, 2021, 36(8): 1628-1635. Wang Yiyu, Cai Yao, Song Xuliang, et al.Characteri- stic analysis and experiment of the equivalent simulation system for null-flux electrodynamic suspension[J]. Transactions of China Electrotechnical Society, 2021, 36(8): 1628-1635. [4] Hasegawa H, Matsue H.Development of a linear generator integrated into an existing superconducting magnet of a yamanashi maglev vehicle[J]. Quarterly Report of RTRI, 2004, 45(1): 21-25. [5] Hasegawa H, Murai T, Sasakawa T.Electromagnetic analysis of a superconducting magnet for a combined- type linear generator[J]. IEEJ Transactions on Industry Applications, 2001, 121(7): 799-804. [6] 吕刚, 郭曦临. 电动磁浮列车用直线谐波发电机发电特性计算[J/OL]. 西南交通大学学报, 2022. http://kns.cnki.net/kcms/detail/51.1277.U.20220511.0945.004.html. Lü Gang, Guo Xilin. Calculation of power generation characteristics of linear harmonic generatorfor elec- trodynamic suspension maglev train[J/OL]. Journal of Southwest Jiaotong University, 2022. http://kns.cnki. net/kcms/detail/51.1277.U.20220511.0945.004.html. [7] Murai T, Hasegawa H, Fujiwara S.Improvement of inductive power collection in null-flux EDS maglev[J]. IEEJ Transactions on Industry Appli- cations, 1997, 117(1): 81-90. [8] 吕刚, 郭曦临, 楚志恒, 等. 多工况下电动悬浮系统直线发电机电磁特性研究[J]. 电工技术学报, 2022, 37(22): 5670-5676. Lü Gang, Guo Xilin, Chu Zhiheng, et al.Elec- tromagnetic characteristics research of electro- dynamics suspension linear generator under multi- condition[J]. Transactions of China Electrotechnical Society, 2022, 37(22): 5670-5676. [9] 欧阳虹, 蒋兴良, 涂振华, 等. 磁浮接触轨电脉冲除冰的试验研究[J]. 高电压技术, 2022, 48(4): 1553-1560. Ouyang Hong, Jiang Xingliang, Tu Zhenhua, et al.Experimental study on electro-impulse de-icing of maglev contact rail[J]. High Voltage Engineering, 2022, 48(4): 1553-1560. [10] 王懿杰, 陆凯兴, 姚友素, 等. 具有强抗偏移性能的电动汽车用无线电能传输系统[J]. 中国电机工程学报, 2019, 39(13): 3907-3916. Wang Yijie, Lu Kaixing, Yao Yousu, et al.An electric vehicle (EV)-oriented wireless power transfer system featuring high misalignment tolerance[J]. Proceedings of the CSEE, 2019, 39(13): 3907-3916. [11] 苏玉刚, 刘家鸣, 王智慧, 等. 磁耦合机构拾取线圈平面金属的影响及其抑制方法[J]. 电工技术学报, 2022, 37(3): 578-588. Su Yugang, Liu Jiaming, Wang Zhihui, et al.Influence analysis of metal in the same plane with pickup coil on magnetic coupler and suppression method[J]. Transactions of China Electrotechnical Society, 2022, 37(3): 578-588. [12] 宋凯, 朱春波, 李阳, 等. 用于电动汽车动态供电的多初级绕组并联无线电能传输技术[J]. 中国电机工程学报, 2015, 35(17): 4445-4453. Song Kai, Zhu Chunbo, Li Yang, et al.Wireless power transfer technology for electric vehicle dynamic charging using multi-parallel primary coils[J]. Proceedings of the CSEE, 2015, 35(17): 4445-4453. [13] 谢文燕, 陈为. 基于组合补偿网络的抗偏移恒流输出无线电能传输系统研究[J]. 电工技术学报, 2022, 37(6): 1495-1512. Xie Wenyan, Chen Wei.Research on anti-offset constant-current output wireless power transfer system based on combined compensation network[J]. Transactions of China Electrotechnical Society, 2022, 37(6): 1495-1512. [14] Diekmann A, Hahn W, Kunze K, et al.The support magnet cladding with integrated IPS@pick-up coil of transrapid vehicles[C]//Maglev: Intemational Con- ference on Magnetically Levitated Systems and Linear Drives, Munich, Germany, 2006: 1-5. [15] 吴冬华, 冯程程, 余进. 磁浮列车非接触式供电技术[J]. 西南交通大学学报, 2022, 57(3): 522-530. Wu Donghua, Feng Chengcheng, Yu Jin.Contactless power supply technology for maglev trains[J]. Journal of Southwest Jiaotong University, 2022, 57(3): 522-530. [16] Deng Junjun, Zhang Yuanqing, Wang Shuo, et al.The design and coupler optimization of a single- transmitter coupled multireceiver inductive power transfer system for maglev trains[J]. IEEE Transa- ctions on Transportation Electrification, 2021, 7(4): 3173-3184. [17] Fujie J.An advanced arrangement of the combined propulsion, levitation and guidance system of superconducting maglev[J]. IEEE Transactions on Magnetics, 1999, 35(5): 4049-4051. [18] 张志华, 张艳清, 闫少强, 等. 适用于磁浮列车全速域运行的非接触供电装置: CN212708981U[P].2021-03-16. [19] Liu Han, Huang Xueliang, Tan Linlin, et al.Dynamic wireless charging for inspection robots based on decentralized energy pickup structure[J]. IEEE Transactions on Industrial Informatics, 2018, 14(4): 1786-1797. [20] Zaheer A, Hao Hao, Covic G A, et al.Investigation of multiple decoupled coil primary pad topologies in lumped IPT systems for interoperable electric vehicle charging[J]. IEEE Transactions on Power Electronics, 2015, 30(4): 1937-1955. [21] Chen Yang, Mai Ruikun, Zhang Youyuan, et al.Improving misalignment tolerance for IPT system using a third-coil[J]. IEEE Transactions on Power Electronics, 2019, 34(4): 3009-3013. [22] Li Hongchao, Liu Yeran, Zhou Kunzhuo, et al.Uniform power IPT system with three-phase trans- mitter and bipolar receiver for dynamic charging[J]. IEEE Transactions on Power Electronics, 2019, 34(3): 2013-2017. [23] Yamamoto T, Murai T, Hasegawa H, et al.Deve- lopment of distributed-type linear generator with damping control[J]. Quarterly Report of RTRI, 2000, 41(2): 83-88. [24] 陈凯楠, 蒋烨, 檀添, 等. 轨道交通350kW大功率无线电能传输系统研究[J]. 电工技术学报, 2022, 37(10): 2411-2421, 2445. Chen Kainan, Jiang Ye, Tan Tian, et al.Research on 350kW high power wireless power transfer system for rail transit[J]. Transactions of China Electrotechnical Society, 2022, 37(10): 2411-2421, 2445. [25] 夏晨阳, 李晓丽, 韩潇左, 等. IPT系统线性自抗扰恒压输出和最大效率跟踪复合控制方法[J]. 中国电机工程学报, 2022, 42(16): 6042-6052. Xia Chenyang, Li Xiaoli, Han Xiaozuo, et al.A hybrid control method for achieving constant voltage output with LADRC and maximum efficiency tracking for IPT systems[J]. Proceedings of the CSEE, 2022, 42(16): 6042-6052.
2024, Vol. 39 
