基于一种电压暂降新型描述的敏感设备免疫能力评估

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (385 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The traditional description method of voltage sag is introduced first, and then its limitations applying in sensitive equipment immunity assessment process are analyzed. A new voltage sag description method using multiple voltage threshold and duration is presented. Based on the new description, the single event and site assessment method for equipment immunity evaluation is proposed, and then the concept of site voltage sags description figure is given. The failure frequency and frequency range of equipment can be obtained conveniently using the proposed method with the equipment voltage tolerance curve. Also, a voltage sag severity index based on the new description, which can overcome the existing shortcomings of overestimation and imprecision of the traditional method, is presented. Finally, the methods above are used to assess the immunity of four typical sensitive equipments, PLC, ASD, AC Relay and PC. The results obtained from the traditional methods are compared and analyzed. The overestimations of traditional method as well as the feasibility of the proposed method are verified.

Key words： Voltage sag sensitive equipment immunity new description site assessment severity index

Received: 16 August 2013 Published: 13 April 2015

PACS:

TM732

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Kong Xiangyu
	Xu Yonghai
	Tao Shun

Cite this article:

Kong Xiangyu,Xu Yonghai,Tao Shun. Sensitive Equipment Immunity Assessment Based on a New Voltage Sag Description[J]. Transactions of China Electrotechnical Society, 2015, 30(3): 165-171.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2015/V30/I3/165

[1] 肖湘宁, 韩民晓, 徐永海, 等. 电能质量分析与控制[M]. 北京: 中国电力出版社, 2010.
[2] 肖湘宁, 陶顺, 徐永海译. 电能质量手册[M]. 北京: 中国电力出版社, 2010.
[3] 陶顺. 现代电力系统电能质量评估体系研究[D]. 北京: 华北电力大学, 2008.
[4] 袁媛, 吴丹岳, 林焱, 等. 电压暂降评估体系研究[J]. 电网技术, 2010, 34(6): 128-133. Yuan Yuan, Wu Danyue, Lin Yan, et al. Study on assessment system of voltage sags[J]. Power System Technology, 2010, 34(6): 128-133.
[5] 刘颖英, 徐永海, 肖湘宁. 地区电网电能质量综合评估新方法[J]. 中国电机工程学报, 2008, 28(22): 130-136. Liu Yingying, Xu Yonghai, Xiao Xiangning. Analysis of new method on power quality comprehensive evaluation for regional grid[J]. Proceedings of the CSEE, 2008, 28(22): 130-136.
[6] 肖湘宁, 陶顺. 中性点不同接地方式下的电压暂降类型及其在变压器间的传递(一)[J]. 电工技术学报, 2007, 22(9): 143-147. Xiao Xiangning, Tao Shun. Voltage sags types under different grounding modes of neutral and their propaga- tion: PartⅠ[J]. Transactions of China Electrotechnical Society , 2007, 22(9): 143-147.
[7] 雷刚, 顾伟, 袁晓冬. 考虑系统与敏感负荷兼容性的电压暂降指标[J]. 电工技术学报, 2010, 25(12): 132-138. Lei Gang, Gu Wei, Yuan Xiaodong. A voltage sag index considering compatibility between system and sensitive equipment[J]. Transactions of China Electro- technical Society, 2010, 25(12): 132-138.
[8] 肖艳辉, 杨洪耕. 基于过程性能指数的电压暂降严重程度评估新方法[J]. 电力系统保护与控制, 2009, 37(23): 1-4. Xiao Yanhui, Yang Honggeng. A new method for estimating the severity of voltage SAG based on process performance index[J]. Power System Protection and Control, 2009, 37(23): 1-4.
[9] Bollen M, Stephens M, Stockman K, et al. CIGRE/ CIRED/UIE JWG C4.110, Voltage dip immunity of equipment and installations[C]. 9th International Conference on Electrical Power Quality and Utilizations, Barcelona, 2007.
[10] Mohseni M, Islam S, Masoum M A S. Impacts of symmetrical and asymmetrical voltage sags on DFIG- based wind turbines considering phase-angle jump, voltage recovery and sag parameters[J]. IEEE Trans- actions on Power Electronics, 2011, 26(5): 1587-1598.
[11] Hardi S, Daut I. Sensitivity of low voltage consumer equipment to voltage sags[C]. 2010 4th International Power Engineering and Optimization Conference, Shah Alam, 2010: 396-401.
[12] Petronijevic M, Veselic B, Mitrovic N, et al. Compara- tive study of unsymmetrical voltage sag effects on adjustable speed induction motor drives[J]. IET Electr Power Applications, 2011, 5(5): 432-442.
[13] Won Dong-Jun, Ahn Seon-Ju, Moon Seung-Il. A modified sag characterization using voltage tolerance curve for power quality diagnosis[J]. IEEE Transactions on Power Delivery, 2005, 20(4): 2638-2643.
[14] Gupta C P, Milanovic J V. Probabilistic assessment of equipment trips due to voltage sags[J]. IEEE Transac- tions on Power Delivery, 2006, 21(2): 711-718.
[15] Bollen M H J, Sabin D D, Thallam R S. Voltage sag indices-recent developments in IEEE P1564 task force[C]. CIGRE/IEEE PES international Symposium Quality and Security of Electric Power Delivery Systems, 2003, 34-41.
[16] Chan J Y, Milanovic J V. Severity indices for assess- ment of equipment sensitivity to voltage sags and short interruptions[C]. Power Engineering Society General Meeting, Tampa, 2007.
[17] 肖先勇, 马超, 杨洪耕, 等. 用电压暂降严重程度和最大熵评估负荷电压暂降敏感度[J]. 中国电机工程学报, 2009, 29(31): 115-121. Xiao Xianyong, Ma Chao, Yang Honggeng, et al. Stochastic estimation of equipment sensitivity to voltage sag based on voltage sag severity index and maximum entropy principle[J]. Proceedings of the CSEE, 2009, 29(31): 115- 121.
[18] IEEE std 1346-1998, IEEE recommended practice for evaluating electric power system compatibility with electronic process equipment[S].