永磁同步电机负载转矩观测器

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (454 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The load torque disturbance will affect the control performance of permanent magnet synchronous motor (PMSM), and a two-degree-of-freedom controller with feed-forward compensation by measured or observed load torque can reduce the effects of the load torque disturbance. In this paper, several load torque observers for PMSM is studied which can observe load torque precisely based on the measured currents, mechanical position and speed, and no extra hardware is needed for the observer. The proposed full order observers can also observe the rotor position and speed based on the output of the mechanical sensor instead of the traditional speed calculation method, and then the differential calculation can be avoided, and the effects of the measurement noise and discretization errors can be reduced. Taking the observer based on Kalman filter as an example, the performances of the observer and feed-forward compensation are verified by simulation and experimental results.

Key words： Load torque observer Luenberger observer Kalman filter permanent magnet synchronous motor two-degree-of-freedom controller feed-forward compensation

Received: 13 August 2008 Published: 12 December 2014

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zheng Zedong
	Li Yongdong
	Xiao Xi
	Maurice Fadel

Cite this article:

Zheng Zedong,Li Yongdong,Xiao Xi等. Load Torque Observer of Permanent Magnet Synchronous Motor[J]. Transactions of China Electrotechnical Society, 2010, 25(2): 30-36.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2010/V25/I2/30

[1] Kickul H, Kwanghee N. A disturbance torque compensation scheme considering the speed measurement delay[C]. Industry Applications Conference, 1996, 1: 403-409.
[2] Batzel T D, Lee K Y. Slotless permanent magnet synchronous motor operation without a high resolution rotor angle sensor[J]. IEEE Transactions on Energy Conversion, 2000, 15(4): 366-371.
[3] Cerruto E, Consoli A, Raciti A, et al. A robust adaptive controller for PM motor drives in robotic applications[J]. IEEE Transactions on Power Electronics, 1995, 10(1): 62-71.
[4] Gasc L, Fadel M, Astier S, et al. Load torque observer for minimising torque ripple in PMSM[C]. ICEMS 2003, 2003, 2: 473-476.
[5] Senjyu T, Shingaki T, Uezato K. Sensorless vector control of synchronous reluctance motors with disturbance torque observer[J]. IEEE Transactions on Industrial Electronics, 2001, 48(2): 402-407.
[6] Xu Dianguo, Yang Gao. An approach to torque ripple compensation for high performance PMSM servo system[C]. PESC, 2004, 5: 3256-3259.
[7] Bertoluzzo M, Buja G, Stampacchia E. Performance analysis of a servo system with high-bandwidth torque disturbance observer[C]. International Workshop on Advanced Motion Control, 2002: 110-115.
[8] Chan Ki K, Hong Woo R, Yoon Ho K. Robust speed control of PMSM using Kalman filter load torque observers[C]. IECON 97, 1997, 2: 918-924.
[9] Fa T Ming, Yu T Ying. A transputer-based adaptive speed controller for AC induction motor drives with load torque estimation[J]. IEEE Transactions on Industry Applications, 1997, 33(2): 558-566.
[10] Zhang Y, Akujuobi C M, Ali W H, et al. Load disturbance resistance speed controller design for PMSM[J]. IEEE Transactions on Industrial Electronics, 2006, 53(4): 1198-1208.
[11] 郑泽东, 李永东, Maurice Fadel, 等. 基于扩展Kalman滤波器的PMSM高性能控制系统[J]. 电工技术学报, 2007, 22(10): 18-23.