|
|
|
| A New Permanent Magnet Biased Radial Magnetic Bearing |
| Sun Jinji, Fang Jiancheng, Wang Xi, Yang Lei, Wang Chun’e |
| Beijing University of Aeronautics and Astronautics Beijing 100191 China |
|
|
|
|
Abstract A new permanent magnet biased radial magnetic bearing is proposed. The control flux passes through the second air gap. The magnetic bearing has four stator pole pieces compared to the heteropolar bearing which has eight stator pole pieces, so the new magnetic bearing can reduce the eddy loss three times. The radial magnetic bearing is analyzed and calculated by using equivalent magnetic circuit and 3D finite element method (FEM). The math expression and some equations are given for maximum carrying capacity, current stiffness and displacement stiffness. Some parameters design and calculation method are presented. The theory analysis and simulation show that this radial magnetic bearing is of little displacement stiffness produced by permanent magnet by means of designing the second air gap. It is useful to reduce perturbance, the stiction torque and improve control accuracy of reaction flywheels. It has wide application in bearingless motor, other flywheel systems, and so on.
|
|
Received: 21 November 2008
Published: 18 February 2014
|
|
|
|
|
|
[1] Babuska V, Beatty S M, deBlonk B J, et al. A review of technology developments in flywheel attitude control and energy transmission systems[C]. Proc. IEEE Aerospace Conf., 2004, 4: 2784-2800.
[2] 朱熀秋, 邓智泉, 袁寿其, 等. 永磁偏置径向-轴向磁悬浮轴承工作原理和参数设计[J]. 中国电机工程学报, 2002, 22 (9): 54-58.
[3] 孙玉坤, 朱熀秋, 蔡兰. 三自由度混合磁悬浮轴承耦合特性[J]. 江苏大学学报(自然科学版), 2006, 127 (4): 342-346.
[4] 朱熀秋, 张仲, 诸德宏, 等. 交直流三自由度混合磁轴承结构与有限分析[J]. 中国电机工程学报, 2007, 27 (12): 79-81.
[5] 宗鸣. 永磁偏置混合式磁轴承及其控制方法的研究[D]. 沈阳: 沈阳工业大学, 2007.
[6] 杨静, 虞烈, 谢敬. 永磁偏置磁轴承动特性研究[J]. 中国电机工程学报, 2005, 25 (5): 122-125.
[7] 高素美, 徐龙祥. 径向两自由度永磁偏置磁轴承的研究[J]. 微特电机, 2007 (11): 11-14.
[8] Zong Ming, Liu Yuhang, Shen Jixiu, et al. Force analysis for hybrid radial magnetic bearing biased by permanent magnet[C]. Electrical Machines and Systems, 2005. Proceedings of the Eighth International Conference, 2005 (3): 1834-1837.
[9] Xu Yanliang, Dun Yueqin, Wang Xiuhe. Analysis of hybrid magnetic bearing with a permanent magnet in the rotor by FEM[J]. IEEE Transactions on Magnetics, 2006, 42 (4): 1363-1366.
[10] Xu Yanliang, Xin Feng. Model establishment and parameter calculation of permanent magnet-biased hybrid magnetic bearing with magnet in rotor[C]. Industrial Electronics and Applications, 2007, 2nd IEEE Conference, 2007: 41-45.
[11] 黄峰, 朱熀秋, 谢志意, 等. 径向二自由度混合磁轴承参数设计与分析[J]. 中国机械工程, 2007, 18 (10): 1143-1146.
[12] 房建成, 孙津济. 一种磁悬浮飞轮用新型永磁偏置径向磁轴承[J]. 北京航空航天大学学报, 2006, 32 (11): 1304-1307. |
|
|
|
2009, Vol. 24 
