Abstract：Because a LC filter is needed in the ac side of the three phase current source pulse width modulation (PWM) rectifier, the source current will lead the source voltage if without any power factor control. In order to control the power factor effectively, a simple and reliable power factor control method is proposed in this paper. The proposed control method only needs to detect the source voltage and the source current, and any other system parameters are not required, so the whole system has very high reliability. Meanwhile, different from the conventional control in the static abc frame, the proposed method based on the gird voltage vector is built in dq synchronous rotating frame, which makes the implementation easy. What's more, this power factor control method can make the rectifier reach the achievable power factor. Meanwhile, the power factor of the whole system is measured in different dc side current conditions when without or with power factor compensation, from which we can see that the rectifier's unity power factor operation area can be improved to a great extent with the proposed power factor control method. All these analyses and the effectiveness of the control method are firstly validated by simulation results, and are verified further in a 5kVA laboratory prototype.
谈龙成, 李耀华, 刘丛伟, 王平, 张彦民, 王武. 三相电流型PWM整流器的功率因数控制方法[J]. 电工技术学报, 2010, 25(2): 86-93.
Tan Longcheng, Li Yaohua, Liu Congwei, Wang Ping, Zhang Yanmin, Wang Wu. Power Factor Control Method of Three Phase Current Source PWM Rectifier. Transactions of China Electrotechnical Society, 2010, 25(2): 86-93.
[1] Wu Bin. High-power converters and AC drives[M]. 3rd ed. Wiley: IEEE Press, 2006. [2] 张崇巍, 张兴. PWM整流器及其控制[M]. 北京: 机械工业出版社, 2003. [3] Choi J H, Kojori H A, Dwan S B. High power GTO-CSC based power supply utilizing SHE-PWM and operating at unity power factor[C]. Canadian Conference on Electrical and Computer Engineering (CCECE), Vancouver, BC, Canada, 1993. [4] Daniel Nahum Zmood, Donald Grahame Holmes. Improved voltage regulation for current source inverters[J]. IEEE Transactions on Industry Applications, 2001, 37(4): 1028-1036. [5] Jose R Espinoza, Geza Joos. DSP implementation of output voltage reconstruction in CSI-based converters[J]. IEEE Transactions on Industry Electronics, 1998, 45(6): 895-904. [6] 吴斌, 宋平岗. 兆瓦级变频调速综合分析[J]. 电工技术学报, 2004, 19(8): 40-52. [7] Naito T, Takei M, Nemoto M, et al. 1200V reverse blocking IGBT with low loss for matrix converter[C]. Proceedings of the 16th International Symposium on Power Semiconductor Devices & Ics, 2004: 125-128. [8] 王长永, 金陶涛, 张仲超. 电流型组合变流器相移SPWM技术的数学分析[J]. 电工技术学报, 2000, 15(6): 18-22. [9] Zhang Zhongchao, Ooi Boonteck. Multimodular current-source SPWM converters for superconducting a magnetic energy storage system[J]. IEEE Transactions on Power Electronics, 1993, 8(3): 250-255. [10] Ibrahim D Hassan, Richard M Bucci, Khin T. 400MW SEMS power conditioning system development and simulation[J]. IEEE Transactions on Power Electronics, 1993, 8(3): 237-249. [11] Xiao Yuan, Wu Bin, Steven C Rizzo, et al. A novel power factor control scheme for high-power GTO current-source converter[J]. IEEE Transactions on Industry Applications, 1998, 34(6): 1278-1283. [12] Tan Longcheng, Li Yaohua, Wang Ping. An overmodulation method for space vector PWM current source inverters[C]. Conf. Rec. IEEE- ICIEA’07, 2007: 2431-2434.
2010, Vol. 25 
