Abstract：This paper presented a novel method for the sensor-less control of sinusoidal PMSM. The idea is different from the traditional one of estimating rotor position. Using the current-based PMSM parameter vector map, it is achieved through ‘mandatory synchronization-efficiency optimization’ method. The paper introduces the achieving method and demonstrated the stability according to torque-angle curve of PMSM. The method is clearly thought-out and has low complexity, the parameters of motor are adaptable, and the hardware system is simple and easy to be achieved. Our experimental results show the feasibility of the method.
吕一松, 李旭春, 贺骥, 吴正礼. 一种无传感器PMSM效率优化控制方法[J]. 电工技术学报, 2010, 25(6): 12-17.
Lü Yisong, Li Xuchun, He Ji, Wu Zhengli. An Efficiency Optimization Method for Sensorless Control of Sinusoidal PMSM. Transactions of China Electrotechnical Society, 2010, 25(6): 12-17.
[1] 梁艳, 李永东. 无传感器永磁同步电机矢量控制系统概述[J]. 电气传动, 2003, 33(4): 4-9. [2] TI公司. 3-phase current measurements using a single line resistor on the TMS320F240. Literature Number: BPRA077. [3] (日)海老原大树主编. 电动机技术[M]. 王益全, 等译.北京: 科学出版社, 2006. [4] 符曦. 高磁场永磁式电动机及其驱动系统[M]. 北京: 机械工业出版社, 1997. [5] 杨耕, 罗应立. 电机与运动控制系统[M]. 北京: 清华大学出版社, 2006. [6] Jacek F Gieras, Mitchell Wing. Permanent magnet motor technology[M]. Boca Raton: CRL Press, 1996. [7] Nobuyuki Matsui. Sensorless PM brushless DC motor drives[J]. IEEE Trans. on Industrial Electronics, 1996, 43(2): 300-308. [8] Fu Minghua, Xu Longya. A novel sensor-less control technique for permanent magnet synchronous motor (PMSM) using digital signal processor (DSP)[C]. Aerospace and Electronics Conference, 1997, 1: 403-408. [9] Takahashi Tomoya, Kosaka Takashi, Matsui Nobuyuk. Some considerations on stability of current polarity detection-based simple position sensorless control for PMSM drive[C]. Papers of Technical Meeting on Rotating Machinery, IEE Japan, 2004(4): 75-80. [10] Guija Su, McKeever J W. Low-cost sensorless control of brushless DC motors with improved speed range[J]. IEEE Trans. on Power Electronics, 2004, 19(2): 296-302.
2010, Vol. 25 
