An Overload Capacity Improvement Method Based on Break Kinetic Energy For a Type of Hermetically Sealed Relay
Li Bo1, You Jiaxin1, Xiong Fangyuan1, Tan Xu2, Liang Huimin1
1. Institute of Reliability in Electrical Apparatus and Electronics Harbin Institute of TechnologyHarbin 150001 China; 2.Shaan Xi Qunli Electric Co. Ltd Baoji 721000 China
Abstract：As one of the important components of the electronic systems, the requirements for the overload capacity of the small hermetically sealed relay (SHSR) is risingwith the development of the multi-application in aerospace field. The experiments for SHSR based on GJB65B is carried out, and the arc and dynamic characteristic is analyzed firstly. There exist some disadvantages for the improvement using the force-velocity improve method: anti-vibration performance decrease, operate voltage rise and so on. In order to solve these shortcomings, a novel break kinetic energy method (BKEM) idea is presented in this paper to improve the overload capacity of SHSR. The BKEM is established, and the new structure of the spring and the contact system of the relay have been improved according to this method. The FEM model for electromagnetic system and the dynamic model for contact system are built, then simulate the effect for the improved design, therefore carry out the comprehensive improvement of the resisting surge capacity. Overload tests are carried out to examine the correctness of this method in practice. Compared with the original design of the SHSR, the validity of the BKEM method for resisting surge performance improvement has been verified.
李博, 由佳欣, 熊方圆, 谭旭, 梁慧敏. 基于分断动能的小型密封电磁继电器过负载能力提升方法[J]. 电工技术学报, 2019, 34(13): 2760-2770.
Li Bo, You Jiaxin, Xiong Fangyuan, Tan Xu, Liang Huimin. An Overload Capacity Improvement Method Based on Break Kinetic Energy For a Type of Hermetically Sealed Relay. Transactions of China Electrotechnical Society, 2019, 34(13): 2760-2770.
[1] 付饶, 林义刚, 叶雪荣. 一种新型航天继电器寿命实验及分析系统[J]. 机电元件, 2016, 36(5): 54-58. Fu Rao, Lin Yigang, Ye Xuerong.A novel type of relay life test and analysis system[J]. Electromechanical Components, 2016, 36(5): 54-58. [2] 蒙航, 李子先, 孙博, 等. 交流负载下电磁继电器的可靠性寿命实验系统研究[J]. 电器与能效管理技术, 2014(24): 1-6. Meng Hang, Li Zixian, Sun Bo, et al.Research on reliability life test system of electromagnetic relay under AC load[J]. Power and Energy Efficiency Management Technology, 2014(24): 1-6. [3] 李丹, 张代润, 杨林. 电磁继电器温升特性的仿真研究[J]. 电气技术, 2018, 19(3): 26-30. Li Dan, Zhang Dairun, Yang Lin.Simulation research on thermal analysis of electromagnetic relays[J]. Electrical Engineering, 2018, 19(3): 26-30. [4] 肖斌, 杨文英, 石磊, 等. 继电器中等电流失效机理及工艺控制研究[J]. 电器与能效管理技术, 2018(4): 34-38. Xiao Bin, Yang Wenying, Shi Lei, et al.Study on failure mechanism and process control of medium current on relay[J]. Power and Energy Efficiency Management Technology, 2018(4): 34-38. [5] 中华人民共和国国家军用标准. 有可靠性指标的电磁继电器总规范: GJB 65B—1999[S]. 北京: 中国电子技术标准化研究院, 1999: 37. [6] 王稚惠. 密封电磁继电器的可靠性及触点粘结失效分析[D]. 哈尔滨: 哈尔滨工业大学, 2007. [7] 叶雪荣, 林义刚, 黄晓毅, 等. 航天继电器贮存过程吸合时间退化机理研究[J]. 电工技术学报, 2017, 32(11): 173-179. Ye Xuerong, Lin Yigang, Huang Xiaoyi, et al.Research on storage degradation mechanism of aerospace electromagnetic relay pick-up time[J]. Transactions of China Electrotechnical Society, 2017, 32(11): 173-179. [8] Reichart M, Neuhaus A R, Schrank C, et al.The influence of design parameters on contact interlocking caused by material transfer[C]//Electrical Contacts - 2007 Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts, Pittsburgh, PA, USA, 2007: 244-250. [9] 康平. 小型密封继电器动态特性建模与分析[D]. 北京: 北京邮电大学, 2014. [10] 陈维, 张国钢, 柯春俊. 分断速度对触头电弧侵蚀影响的数值分析[J]. 低压电器, 2009(9): 16-20. Chen Wei, Zhang Guogang, KeChunjun. Numeric analysis of the influence of opening speed on arc erosion of contact[J]. Low Voltage Apparatus, 2009(9): 16-20. [11] 薄凯, 乔鑫磊, 陈默, 等. 直流大功率继电器分断电弧特性实验研究[J].电器与能效管理技术, 2015(15): 7-10. Bo Kai, QiaoXinlei, Chen Mo, et al. Experimental study of breaking arc for high-power DC relay[J]. Power and Energy Efficiency Management Technology, 2015(15): 7-10. [12] 翟国富, 樊薇薇, 梁慧敏. 基于均匀实验设计的航天电磁继电器触点滑移长度优化[J]. 电工技术学报, 2009, 24(10): 59-64. ZhaiGuofu, Fan Weiwei, Liang Huimin. An optimization method for the contact slip length of space electromagnetic relay based on uniform experimental design[J]. Transactions of China Electrotechnical Society, 2009, 24(10): 59-64. [13] 崔斌, 肖斌, 周文博, 等. 基于DOE设计的航天电磁继电器折线形簧片模态分析[J]. 机电元件, 2016, 36(5): 44-48. Cui Bin, Xiao Bin, Zhou Wenbo, et al.Model analysis for a type of folded design spring used in an electromagnetic relay based on DOE[J]. Electromechanical Components, 2016, 36(5): 44-48. [14] Zhou Xue, Chen Mo, ZhaiGuofu. Comparisons on Arc behavior and contact performance between Cu and Cu-Mo alloys in a bridge-type contact system[J]. IEICE Transactions on Electronics, 2015, E98C(9): 904-911. [15] 任万滨, 武剑, 陈宇, 等. 电触点材料接触电阻高精密测量技术[J]. 电工技术学报, 2014, 29(1): 31-36. RenWanbin, Wu Jian, Chen Yu, et al. Precision measuring technique for contact resistance of contact materials[J]. Transactions of China Electrotechnical Society, 2014, 29(1): 31-36. [16] 翟国富, 薄凯, 周学, 等. 直流大功率继电器电弧研究综述[J]. 电工技术学报, 2017, 32(22): 251-263. ZhaiGuofu, Bo Kai, Zhou Xue, et al. Investigation on breaking arc in DC high-power relays: a review[J]. Transactions of China Electrotechnical Society, 2017, 32(22): 251-263. [17] 崔行磊, 周学, 张勇, 等. 基于彩色摄像和光谱分析联合测温方法的电弧温度场分布测量[J]. 电工技术学报, 2017, 32(15): 128-135. Cui Xinglei, Zhou Xue, Zhang Yong, et al.Measurement of static arc temperature distribution based on colorful photographing and spectroscopy analysis[J]. Transactions of China Electrotechnical Society, 2017, 32(15): 128-135. [18] 翟国富, 周学, 杨文英. 纵向与横向磁场作用下分断直流感性负载时的电弧特性实验[J]. 电工技术学报, 2011, 26(1): 68-74. ZhaiGuofu, Zhou Xue, Yang Wenying. Experiment on DC inductive arcs driven by axial and transverse magnetic fields[J]. Transactions of China Electrotechnical Society, 2011, 26(1): 68-74. [19] Lindmayer M.Simulation of switching arcs under transverse magnetic fields for DC interruption[J]. IEEE Transactions on Plasma Science, 2016, 44(2): 187-194. [20] Bo Kai, Zhou Xue, ZhaiGuofu. Investigation on arc dwell and restriking characteristics in DC high-power relay[J]. IEEE Transactions on Plasma Science, 2017, 45(6): 1032-1042. [21] Zhou Xue, Cui Xinglei, Chen Mo, et al.Experimental study on arc behaviors of a bridge-type contact when opening a resistive load in the range of from 280VDC to 730VDC[C]//2014 IEEE 60th Holm Conference on Electrical Contacts (Holm), New Orleans, LA, USA, 2014: 1-7. [22] 冯锟, 杨华, 陈超, 等. 短路故障下直流固态断路器缓冲电路的设计[J]. 电力系统保护与控制, 2018, 46(3): 97-102. Feng Kun, Yang Hua, Chen Chao, et al.Design of snubber circuit for DC solid-state circuit breaker in short-circuit fault[J]. Power System Protection and Control, 2018, 46(3): 97-102. [23] 舒亮, 吴浪, 吴桂初, 等. 一种断路器多体动力学仿真方法[J]. 电工技术学报, 2017, 32(5): 41-48. Shu Liang, Wu Lang, Wu Guichu, et al.A new method of multibody dynamics simulation of circuit breakers[J]. Transactions of China Electrotechnical Society, 2017, 32(5): 41-48. [24] 程显, 段雄英, 廖敏夫, 等. 混合断路器大电流开断过程中真空电弧与SF6电弧相互作用的仿真[J]. 高电压技术, 2012, 38(6): 1529-1536. Cheng Xian, DuanXiongying, Liao Minfu, et al. Simulation on interaction of vacuum arc and SF6 arc inhybrid circuit breaker during high-current interruption[J]. High Voltage Engineering, 2012, 38(6): 1529-1536. [25] 汪倩, 屈建宇, 李兴文. 引弧板对桥式双断点断路器灭弧性能的影响[J]. 高电压技术, 2017, 43(3): 845-850. Wang Qian, QuJianyu, Li Xingwen. Influences of arc plate on arc-quenching performance of Bridge-shape Double-break circuit breaker[J]. High Voltage Engineering, 2017, 43(3): 845-850.
2019, Vol. 34 
