Abstract：Jiles-Atherton(J-A) model is widely employed in the area of magnetic modeling, however, the minor hysteresis loop given by J-A model is not accurate and J-A model can not study the effects of temperature on hysteresis loop. In order to build an accurate temperature-dependent hysteresis loop model, the methods of error modification and temperature simulation on J-A model are proposed. The accuracy of minor hysteresis loop is improved by modifying model parameters and temperature is introduced into J-A model by adding curie temperature, critical exponent and other parameters. Modeling process of Fe-Si magnetic sheet is introduced and results show good agreement between theory and experiment and prove that the new model is useful.
李超, 徐启峰. J-A模型误差修正和温度特性仿真[J]. 电工技术学报, 2014, 29(9): 232-238.
Li Chao, Xu Qifeng. Error Modification and Temperature Simulation of J-A Model. Transactions of China Electrotechnical Society, 2014, 29(9): 232-238.
[1] 李贞, 李庆民, 李长云, 等. J-A磁化建模理论的质疑与修正方法研究[J]. 中国电机工程学报, 2011, 31(3): 124-131. Li Zhen, Li Qingmin, Li Changyun, et al. Queries on the J-A modelling theory of the magnetization process in ferromagnets and proposed correction method[J]. Proceedings of the CSEE, 2011, 31(3): 124-131. [2] Annakkage U D, McLaren P G, Jayasinghe D R P, et al. A current transformer model based on the jiles- atherton theory of ferromagnetic hysteresis[J]. IEEE Transactions on Power Delivery, 2000, 15(1): 57-61. [3] Jacek Izydorczyk. A new algorithm for extraction of parameters of jiles and Atherton hysteresis model[J]. IEEE Transactions on Magnetics, 2006, 42(10): 3132-3134. [4] Themistoklis D Kefalas, Antonios G Kladas. Harmonic impact on distribution transformer no-load loss[J]. IEEE Transactions on Industrial Electronics, 2010, 57(1): 193-200. [5] Jiles David C, Atherton David L. Theory of ferro- magnetic hysteresis[J]. Journal of Applied Physics, 1984, 55(6): 2115-2120. [6] Garikepati P, Chang T T, Jiles D C. Theory of ferromagnetic hysteresis: evaluation of stress from hysteresis curves[J]. IEEE Transactions on Magnetics, 1988, 24(6): 2922-2924. [7] Jiles D C. Frequency dependence of hysteresis curves in conducting magnetic materials[J]. Journal of Applied Physics, 1994, 76(10): 5849-5855. [8] 李晓萍, 彭青顺, 李金保, 等. 变压器铁心磁滞模型参数辨识[J]. 电网技术, 2012, 36(2): 200-205. Li Xiaoping, Peng Qingshun, Li Jinbao, et al. Parameter identification of hysteresis loop model for transformer core[J]. Power System Technology, 2012, 36(2): 200-205. [9] Anthony Arrott, John E Noakes. Approximate equation of state for nickel near its critical temperature[J]. Physical Review Letters, 1967, 19(14): 786-789. [10] Andre P, Stancu A, Hauser H, et al. Temperature stress and rate dependent numerical implementation of magnetization processes in phenomenological models[J]. Optoelectronics and Advanced Materials, 2007, 9(4): 1137-1139. [11] Raghunathan A, Melikhov Y, Snyder J E, et al. Theoretical model of temperature dependence of hysteresis based on mean field theory[J]. IEEE Transactions on Magnetics, 2010, 46(6): 1507-1510. [12] 纪松, 钱坤明, 谭锁奎, 等. 基于Hopkinson效应的计算机控制软磁材料居里温度测量仪的研制[J]. 磁性材料及器件, 2005, 36(4): 34-37. Ji Song, Qian Kunming, Tan Suokui, et al. Development of computer aided curie temperature metrical instrument for soft magnetic materials applying hopkinson effect [J]. Journal of Magnetic Materials and Devices, 2005, 36(4): 34-37. [13] 谢光彬, 金熙, 郎桐, 等. 基于居里温度的输电线路连接点感温指示器研究[J]. 电测与仪表, 2012, 49(556): 59-63. Xie Guangbin, Jin Xi, Lang Tong, et al. The research of contact feeling temperature indicator based on curie temperature for transmission line[J]. Electrical Measurement&Instrumentation, 2012, 49(556): 59-63. [14] 刘毅, 林福昌, 冯希波, 等. 能源模块磁开关工作特性分析[J]. 中国电机工程学报, 2012, 32(36): 142-148. Liu Yi, Lin Fuchang, Feng Xibo, et al. Working characteristics analysis of magnetic switch in energy module[J]. Proceedings of the CSEE, 2012, 32(36): 142-148. [15] 马玉利, 戴心锐. 铁磁材料动态磁滞回线测绘方法的优化设计[J]. 物理与工程, 2012, 22(5): 32-34. Ma Yuli, Dai Xinrui. Optimized design of mapping method for dynamic hysteresis loop of ferromagnetic material[J]. Physics and Engineering, 2012, 22(5): 32-34.
2014, Vol. 29 
