Abstract：Indirect field oriented control of induction machine is widely used in a lot of industrial applications. The performance of the control scheme, however, strongly relies on the parameters of the motor, e.g. the rotor resistance and mutual inductance between rotor and stator of the motor. The variance of the parameters in operation results in decline of the control, that is vital especially for the torque control in electric vehicles. In this paper, the effects of parameter errors including rotor resistance and mutual inductance, on the rotor flux and the electromagnetic torque are discussed in details. A new scheme of tuning parameters on-line via the steady state voltage model based rotor flux estimation is proposed, in which the inverses of rotor time constant and mutual inductance are corrected by the error of phase angle and magnitude of the rotor flux. The simulation and experiment results validate the effectiveness in improving torque control of the new method.
张杰, 柴建云, 孙旭东, 陆海峰. 基于参数在线校正的电动汽车异步电机间接矢量控制[J]. 电工技术学报, 2014, 29(7): 90-96.
Zhang Jie, Chai Jianyun, Sun Xudong, Lu Haifeng. Indirect Vector Control of Induction Motor Drives for Electric Vehicles Based on Parameters On-Line Tuning. Transactions of China Electrotechnical Society, 2014, 29(7): 90-96.
[1] 陆海峰, 瞿文龙, 张磊, 等. 一种基于无功功率的异步电机矢量控制转子磁链准确定向方法[J]. 中国电机工程学报, 2005, 25(16): 116-120. Lu Haifeng, Qu Wenlong, Zhang Lei, et al. A novel rotor flux oriented scheme of induction motor based on reactive power[J]. Proceedings of the CSEE, 2005, 25(16): 116-120. [2] 郭世明. 机车动车牵引交流传动技术[M]. 北京: 机械工业出版社, 2012. [3] Rowan T M, Kerkman R J, Leggate D. A simple on-line adaption for indirect field orientation of an induction machine[J]. IEEE Transactions on Industry Applications, 1991, 27(4): 720-727. [4] Peretti L, Zigliotto M. Automatic procedure for induction motor parameter estimation at standstill[J]. IET Electric Power Applications, 2012, 6(4): 214-224. [5] Choi D H, Shin M H, Lee T K, et al. Vector control of an induction motor for the field weakening region with tuning of the magnetizing inductance[C]. Power Conversion Conference, Nagaoka, 1997: 107-112. [6] 樊扬, 瞿文龙, 陆海峰, 等. 基于转子磁链q轴分量的异步电机间接矢量控制转差频率校正[J]. 中国电机工程学报, 2009, 29(9): 62-66. Fan Yang, Qu Wenlong, Lu Haifeng, et al. Slip frequency correction method base on rotor flux q axis component for induction machine indirect vector control system[J]. Proceedings of the CSEE, 2009, 29(9): 62-66. [7] Atkinson D J, Acarnley P P, Finch J W. Observers for induction motor state and parameter estimation[J]. IEEE Transactions on Industry Applications, 1991, 27(6): 1119-1127. [8] Zai Licheng, DeMarco L C, Lipo T A. An extended Kalman filter approach to rotor time constant measurement in PWM induction motor drives[J]. IEEE Transactions on Industry Applications, 1992, 28(1): 96-104. [9] Chai H, Acarnley P P. Induction motor parameter estimation algorithm using spectral analysis[J]. IEE Proceedings B on Power, Energy, & Industry Applications, 1992, 139(3): 165-174. [10] 徐小增. 基于参数辨识及补偿控制的异步电动机智能控制技术研究[D]. 武汉: 华中科技大学, 2005. [11] Sakae Yamamura. AC motors for high-performance applications: analysis and control[M]. New York: Marcel Dekker Inc, 1986. [12] 陈伯时. 电力拖动自动控制系统: 运动控制系统[M]. 北京: 机械工业出版社, 2009.
2014, Vol. 29 
