Abstract：According to four different neutral connections and their current restrictions of dual three-phase permanent magnet synchronous motor(PMSM) with one open phase, four transformation matrixes are determined based on vector space decomposition modeling method and four mathematic models are set up. Every model is projected into d-q subspace which contributes to electromechanical energy conversion and z1-z2-z3 subspace which has no relation to energy conversion. The four models have the same structure and different parameter matrixes in d-q subspace. The vector control for minimum stator loss could be realized by setting the current references in z1-z2-z3 subspace to zero. The simulation and experimental results show that the motor can work well with one open phase in different neutral connections with their control methods. So the fault tolerant ability of the system is improved.
杨金波, 李铁才, 杨贵杰. 一相开路双三相永磁同步电机建模与控制[J]. 电工技术学报, 2011, 26(10): 167-173.
Yang Jinbo, Li Tiecai, Yang Guijie. Modeling and Control of Dual Three-Phase PMSM with One Open Phase. Transactions of China Electrotechnical Society, 2011, 26(10): 167-173.
[1] Liu T H, Fu J R, Lipo T A. A strategy for improving reliability of field-oriented controlled induction motor drives[J]. IEEE Transactions on Industry Applications, 1993, 29(5): 910-918. [2] Fu J R, Lipo T A. Disturbance-free operation of a multiphase current-regulated motor drive with an open phase[J]. IEEE Transactions on Industry Application, 1994, 30(5): 1267-1274. [3] Toliyat H A. Analysis and simulation of five-phase variable-speed induction motor drives under asymmetrical connections[J]. IEEE Transactions on Power Electronics, 1998, 13(4): 748-756. [4] 欧阳红林, 周马山, 童调生. 多相永磁同步电动机不对称运行的矢量控制[J]. 中国电机工程学报, 2004, 24(7): 145-150. [5] Shamsi Nejad M, Nahid Mobarakeh B, Pierfederici S, et al. Fault tolerant and minimum loss control of double-star synchronous machines under open phase conditions[J]. IEEE Transactions on Industrial Electronics, 2008, 55(5): 1956-1965. [6] Zhao Y F, Lipo T A. Modeling and control of a multi-phase induction machine with structural unbalance, part I—machine modeling and multi- dimensional current regulation[J]. IEEE Transactions on Energy Conversion, 1996, 11(3): 570-577. [7] Zhao Y F, Lipo T A. Modeling and control of a multi-phase induction machine with structural unbalance, part II—field-oriented control and experimental verification[J]. IEEE Transactions on Energy Conversion, 1996, 11(3): 578-584. [8] Tian D, Chen L, Hou L J, et al. Modeling and simulation of dual three-phase induction machine with two opened phases[C]. IEEE International Conference on Industrial Technology, Chengdu, China, 2008: 1-5. [9] Alcharea R, Nahid Mobarakeh B, Baghli L, et al. Decoupling modeling and control of six-phase induction machines under open phase fault conditions[C]. IEEE Industrial Electronics Annual Conference, Paris, France, 2006: 5101-5106. [10] Kianinezhad R, Nahid Mobarakeh B, Baghli L, et al. Modeling and control of six-phase symmetrical induction machine under fault condition due to open phases[J]. IEEE Transactions on Industrial Electronics, 2008, 55(5): 1966-1977. [11] Ryu H M, Kim J W, Sul S K. Synchronous-frame current control of multiphase synchronous motor under asymmetric fault condition due to open phases[J]. IEEE Transactions on Industry Applications, 2006, 42(4): 1062-1070. [12] 周马山, 欧阳红林, 童调生, 等. 不对称多相PMSM的矢量控制[J]. 电工技术学报, 2004, 19(12): 37-41. [13] 杨金波, 杨贵杰, 李铁才. 双三相永磁同步电机的建模与矢量控制[J]. 电机与控制学报, 2010, 14(6): 1-7.
2011, Vol. 26 
