Abstract：Two different models of LED streetlight are constructed and simulated by TracePro. Importing the data of TracePro in Dialux,practical simulation of the road lighting is analyzed and compared. From results of simulation, it is found that both of the first optics design of a peanut form lens and the secondary optics design of peanut form lens can achieve light distribution curve of bat wing and rectangular light field; but the uniformity of the second model, i.e. the secondary optics design of peanut form lens is better, and that is more suitable for practical road lighting.
[1] 罗毅, 张贤鹏, 王霖. 半导体照明中的非成像光学及其应用[J]. 中国激光, 2008, 35(7): 963-971. Luo Yi, Zhang Xianpeng, Wang Lin. Non-imaging. optics and its application in solid state lighting[J]. Chinese Journal of Lasers, 2008, 35(7): 963-971. [2] 钱可元, 罗毅. LED城市道路照明灯具二次光学系统的光效分析[J]. 照明工程学报, 2009, 33(S1): 21-25. Qian Keyuan, Luo Yi. Optical efficiency analysis of LED road lighting luminaive[J]. Zhaoming Gongcheng Xuebao, 2009, 33(S1): 21-25. [3] 罗元, 毛建伟. LED路灯配光方案研究[J]. 灯与照明, 2011, 35(2): 43-46. Luo Yuan, Mao Jianwei. Research on light distribution schemes for LED street light[J]. Light & Lighting, 2011, 35(2): 43-46. [4] William A parkyn. Design of illumination lenses via extrinsic differential geometry[C]. SPIE, 1998: 154- 162. [5] 夏勋力, 余彬海, 梁丽芳. 矩形光场LED一次透镜光学设计[J]. 半导体光电, 2010, 31(5): 690-693. Xia Xunli, Yu Binhai, Liang Lifang. Design of LED lens for rectangular light field[J]. Semiconductor Optoelectronics, 2010, 31(5): 690-693. [6] 安宇鹏, 王一丁, 李黎．采用Tracepro进行中红外气体检测系统的光路结构设计[J].激光与红外, 2009, 39(11): 1198-1201. An Yupeng, Wang Yiding, Li Li. Design of the optical structure of themid-infrared gas sensing system by using the TracePro[J]. Laser & Infrared, 2009, 39(11): 1198-1201. [7] 李翊君. Dialux软件在道路照明设计中的应用[J]. 城市路桥与防洪, 2013(2): 99-103. Li Yijun. Application of Dialux in road lighting design[J]. Urban Roads Bridges & Flood Control, 2013(2): 99-103. [8] Lo Yichien, Huang Kuanteng, Lee Xuanhao. Optical design of a Butter?y lens for a street light based on a double-cluster LED[J]. Microelectronics Reliability, 2011. [9] Causa F, Sarma J. Realistic model for the output beam profile of stripe and tapered superluminescent light- emitting diodes[J]. Appl. Opt., 2003, 42: 4341-4348. [10] Wood D. Optoelectronic semiconductor devices[M]. New York: Prentice-Hall International, 1994. [11] 胡海蕾. LED照明光学系统的设计及其阵列光照度分布研究[D]. 福建: 福建师范大学, 2005. [12] 张奇辉. 大功率LED照明系统光学设计方法研究[D]. 广州: 华南理工大学, 2010.
2015, Vol. 30 
