基于混合高温超导储能系统的电网动态功率补偿策略与试验

摘要
图/表
参考文献
相关文章 (1)

全文: PDF (584 KB)
输出: BibTeX | EndNote (RIS)

摘要为实现高温超导储能系统(SMES)对电网功率波动的动态补偿, 采用第1代铋系和第2代钇钡铜氧高温超导材料, 设计并构建了过冷液氮温区运行、千焦级容量的混合高温超导储能系统。应用数字信号处理器和微控制器的双处理器形式, 设计了LCL滤波的电压型SMES变流器的功率控制系统电路, 基于空间矢量脉冲调制法(SVPWM), 提出了SMES变流器对系统功率补偿的控制方法, 并进行控制软件编程, 实现对并网侧功率的动态监测和补偿策略的实时计算。最后应用SMES在一条200km输电线路上进行并网动模试验, 针对电网负荷变化产生的功率波动状态, 实现了毫秒级内对电力系统的快速功率输出和波动抑制, 验证了超导储能系统对电网瞬时功率补偿策略和功率补偿变流装置的有效性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	诸嘉慧
	宝旭峥
	丘明
	董明会
	詹智华
	黄宇淇

关键词 ：高温超导储能系统, 铋系超导体, 钇钡铜氧涂层导体, 动模试验

Abstract：A kJ class high temperature superconducting magnetic energy storage system (HT-SMES) composed of first generation (BSCCO) and second generation (YBCO) HTS wires with sub-cooled LN2 cooling system was optimal designed and applied for the power fluctuation compensation in power system. A dual processor combined with the digital signal processor (DSP) and the micro-programmed control unit (MCU) was proposed and used in the LCL filtered voltage source converter for the hybrid SMES. Based on the SVPWM the power fluctuation compensation strategy of the SMES and its program realization based on the code composer studio (CCS) were given for achieving the dynamic monitoring and compensation strategy calculation in power system. Finally, a dynamic simulation test system with this SMES and a 200km length transmission line for compensation the power fluctuation was build up. The experimental results show that the SMES can output the required compensation electric power and restrain the power fluctuation in millisecond, which validate the effectiveness of the SMES converter and the control strategy as well.

Key words： High temperature superconducting magnetic energy storage system BSCCO YBCO dynamic simulation test power fluctuation compensation.

收稿日期: 2011-11-30 出版日期: 2014-03-20

PACS:	TM917
	TM761

基金资助:国家电网公司科研项目基金资助项目(DG71-09-008)。

作者简介: 诸嘉慧女, 1977年生, 博士, 高级工程师, 研究方向为超导电力技术、电磁场的数值计算、大型发电机的故障分析与保护以及电力电子技术。宝旭峥男, 1986年生, 硕士研究生, 研究方向为超导电力技术和电力电子技术。

引用本文:

诸嘉慧, 宝旭峥, 丘明, 董明会, 詹智华, 黄宇淇. 基于混合高温超导储能系统的电网动态功率补偿策略与试验[J]. 电工技术学报, 2012, 27(8): 14-20. Zhu Jiahui, Bao Xuzheng, Qiu Ming, Dong Minghui, Zhan Zhihua, Huang Yuqi. Power Fluctuation Compensation Research in Power System Using a High Temperature Hybrid SMES. Transactions of China Electrotechnical Society, 2012, 27(8): 14-20.

链接本文:

http://dgjsxb.ces-transaction.com/CN/Y2012/V27/I8/14

[1] Ali Mohd Hasan, Wu Bin, Dougal Roger A. An overview of SMES applications in power and energy systems[J]. IEEE Transactions on Sustainable Energy. 2010, 1(1): 38-47.
[2] Tsukamoto O. Overview of superconductivity in Japan-Strategy road map and R&D status[J]. Physica C: Superconductivity, 2008, 468(15-20): 1101-1111.
[3] 蒋晓华, 褚旭, 吴学智. 20kJ/15kW可控超导储能实验装置[J]. 电力系统自动化, 2004, 28(4): 88-91.
Jiang Xiaohua. Chu Xu, Wu Xuezhi. A 20kJ/15kW SMES system[J]. Automation of Electric Power Systems, 2004, 28(4): 88-91.
[4] Shi Jing, Tang Yuejin, Zhou Yusheng, et al. Development of a conduction-cooled HTS SMES[J]. IEEE Transactions on Applied Superconductivity, 2007, 17(3): 3846-3852.
[5] So Noguchi. An optimization method for design of SMES coils using YBCO tape[J]. IEEE Transactions on Applied Superconductivity, 2003, 13(2): 1856- 1859.
[6] 郭文勇, 赵彩宏, 肖立业. 超导储能用电流调节器充放数学模型及其控制系统[J]. 电工技术学报, 2007, 22(10): 117-122.
Guo Wenyong, Zhao Caihong, Xiao Liye. Charging and discharging math model and control system of current regulator for superconducting magnetic energy storage[J]. Transactions of China Electrotechnical Society, 2007, 22(10): 117-122.
[7] 李君, 徐德鸿, 郑家伟, 等. 超导储能系统用多模块电流型变流器载波轮换均流方法[J]. 中国电机工程学报, 2004, 24(7): 106-111.
Li Jun, Xu Dehong, Cheng Jiawei, et al. Carrier-swapping method to equalize current in a multi-modular current source converter for SMES[J]. Proceedings of the CSEE, 2004, 24(7): 106-111.
[8] 诸嘉慧, 程强, 杨斌. 电压型高温超导储能系统变流器设计与试验[J]. 电力自动化设备, 2011, 31(2): 119-123.
Zhu Jiahui, Cheng Qiang, Yang Bin. Design and experiment of the voltage source converter for the high temperature superconducting magnetic energy storage system[J]. Electric Power Automation Equipment, 2011, 31(2): 119-123.