短路容错控制在多相无轴承永磁同步电机中的可行性分析

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1638 KB)
输出: BibTeX | EndNote (RIS)

摘要容错性作为多相无轴承永磁电机关键技术之一, 其控制系统的可行性对提高整个电机的安全性和鲁棒性具有重要意义。本文对多相无轴承永磁电机短路故障下的控制模型及其短路电流表达式进行了推导。在此基础上, 提出以某特定矩阵的三阶非零子式或其行秩作为短路容错控制的可行性判别依据。并以一台六相无轴承永磁电机为例, 对其中任意一相、两相和三相绕组发生短路故障时的容错控制可行性进行了系统分析和归纳, 且给出了该电机的短路容错控制系统框图。文中还利用有限元仿真对短路故障下的电机运行状态作了详细分析, 并在一套原理样机平台上进行了实验验证。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王晓琳
	任新宇
	邓智泉
	廖启新

关键词 ：容错, 磁悬浮, 可行性, 永磁电机, 无轴承电机, 短路, 多相

Abstract：As a key technology of multi-phase PM bearingless motors, a feasible fault-tolerant control system is vital for improving their safety and robustness. In this paper, the control model with different short-circuited faulty phases and the short-circuited current expression are established. Moreover, its corresponding discriminant condition is proposed based on third-order nonzero minors or the row rank of a certain matrix. As an example, the feasibility of the fault-tolerant control with arbitrary single, double or triple short-circuited phase(s) for a six-phase PM bearingless motor is discussed in detail. The fault-tolerant control system with short-circuited cases is shown. Simulation results from finite-element analysis are presented to demonstrate the operation of the motor under the proposed fault tolerant control. A principle prototype is developed and the experimental results are also provided to further demonstrate the analysis.

Key words： Fault tolerance magnetic levitation feasibility permanent magnet motors bearingless motors short-circuited multi-phase

收稿日期: 2010-10-12 出版日期: 2014-03-20

PACS:

TM351

基金资助:国家自然科学基金资助项目(50977043)。

作者简介: 王晓琳男, 1976年生, 博士, 副教授, 研究领域为磁悬浮技术, 电机及其控制。任新宇男, 1987年生, 硕士研究生, 研究方向为无轴承永磁薄片电机及其容错控制, 无轴承薄片电机本体优化设计。

引用本文:

王晓琳, 任新宇, 邓智泉, 廖启新. 短路容错控制在多相无轴承永磁同步电机中的可行性分析[J]. 电工技术学报, 2012, 27(3): 105-118. Wang Xiaolin, Ren Xinyu, Deng Zhiquan, Liao Qixin. Feasibility of Fault-Tolerant Control of Multi-Phase Permanent Magnetic Bearingless Motors with Short-Circuited Phases. Transactions of China Electrotechnical Society, 2012, 27(3): 105-118.

链接本文:

http://dgjsxb.ces-transaction.com/CN/Y2012/V27/I3/105

[1] Salazar A, Chiba A, Fukao A. A review of developments in bearingless motors[C]. The 7th Symposium Magnetic Bearings, 2000.
[2] Amrhein W, Silber S, Nenninger K. Developments on bearing drive technology[C]. The 8th Symposium Magnetic Bearings, 2002.
[3] 王凤翔, 郑柒拾, 王宝国. 不同转子结构无轴承电动机的磁悬浮力分析与计算[J]. 电工技术学报, 2002, 17(5): 6-9.
[4] 邓智泉, 严仰光. 无轴承交流电动机的基本理论和研究现状[J]. 电工技术学报, 2000, 15(2): 29-35.
[5] Silber S, Amrhein W, Nenninger K, et al. Performance optimization of a bearingless pump using feedback linearization techniques[C]. The 8th International Symposium on Magnetic Bearings, 2002: 379-382.
[6] Silber S, Amrhein W, Bosch P, et al. Design aspects of bearingless slice motors[J]. IEEE ASME Transactions on Mechatronics, 2005, 10(6): 611-617.
[7] 朱俊. 单绕组无轴承永磁薄片电机的研究[D]. 南京: 南京航空航天大学, 2008.
[8] 康敏. 单绕组多相无轴承电机的研究[D]. 杭州: 浙江大学, 2009.
[9] Khoo W. Bridge configured winding for polyphase self-bearing machines[J]. IEEE Transactions on Magnetics, 2005, 41(4): 1289-1295.
[10] Khoo R L F W K S, Garvey S D. AC polyphase self-bearing motors with a bridge configured winding[C]. The 7th International Symposium on Magnetic Bearings, 2002: 47-52.
[11] Huang J, Kang M, Yang J Q. Analysis of a new 5-phase bearingless induction motor[J]. Journal of Zhejiang University: Science A, 2007, 8(8): 1311-1319.
[12] 黄进, 康敏, 杨家强. 新型单绕组多相无轴承电机[J]. 浙江大学学报(工学版), 2007, 41(11): 1850-1856.
Huang Jin, Kang Min, Yang Jiaqiang. Novel bearingless machine with a single set of multiphase windings[J]. Journal of Zhejiang University (Engineering Science), 2007, 41(11): 1850-1856.
[13] Kang M, Huang J, Yang J Q, et al. Analysis and experiment of a 6-phase bearingless induction motor[C]. Proceedings of the 11th International Conference on Electrical Machines and Systems, 2008: 990-994.
[14] Bartholet M T, Nussbaumer T, Krahenbuhl D, et al. Modulation concepts for the control of a two-phase bearingless slice motor utilizing three-phase power modules[J]. IEEE Transactions on Industry Applica- tions, 2010, 46(2): 831-840.
[15] Bartholet M T, Silber S, Nussbaumer T, et al. Performance investigation of two-, three- and four-phase bearingless slice motor configurations[C]. International Conference on Power Electronics and Drive Systems, 2007: 9-16.
[16] Bartholet M T, Nussbaumer T, Silber S, et al. Comparative evaluation of polyphase bearingless slice motors for fluid-handling applications[J]. IEEE Transactions on Industry Applications, 2009, 45(5): 1821-1830.
[17] 廖启新. 无轴承永磁薄片电机的研究[D]. 南京: 南京航空航天大学, 2005.
[18] 姜海博, 黄进, 康敏. 单绕组五相永磁无轴承电机的SVPWM 控制[J]. 电工技术学报, 2011, 1(26): 34-39.
Jiang Haibo, Huang Jin, Kang Min. SVPWM control for a 5-phase PM bearingless motor with single set of windings[J]. Transactions of China Electro-technical Society, 2011, 1(26): 34-39.
[19] Silber S, Amrhein W. Power optimal current control scheme for bearingless PM motors[C]. The 7th International Symposium on Magnetic Bearings, 2000: 401-406.
[20] Grabner H, Amrhein W, Silber S, et al. Norlinear feedback control of a bearingless brushless DC motor[C]. The 6th International Conference on Power Electronics and Drives Systems(IEEE Industry Applications and Power Electronics Societies), 2005: 366-371.
[21] 岳盛奏, 王晓琳, 廖启新, 等. 无轴承薄片电机的自诊断容错运行[J]. 电工技术学报, 2010, 25(1): 1-6.
[22] 岳盛奏, 王晓琳, 邓智泉, 等. 单绕组无轴承永磁薄片电机缺相运行特性分析[J]. 中国电机工程学报, 2009, 29(23): 80-86.
[23] 王晓琳, 盛旺, 邓智泉, 等. 多相无轴承永磁薄片电机故障运行特性分析[J]. 中国电机工程学报, 2011, 31(18): 73-78.
[24] Ooshima M, Chiba A, Fukao T, et al. Design and analysis of permanent magnet-type bearingless motors[J]. IEEE Transactions on Industrial Electronics, 1996, 43(2): 292-299.