Abstract：A bidirectional crosslinking transverse flux flat type permanent magnet linear synchronous motor is presented, which has larger space utilization ratio than traditional transverse flux machine, with the features of fully utilizing secondary permanent magnets and increasing the no-load back-EMF. The structure and principle of this machine is introduced, and the electromagnetic design method is presented in this paper. In additional, the structure of the motor size is optimized by 3-D finite element method. A prototype is designed and manufactured. The no-load back-EMF and static thrust experiments are carried out. The theoretical analyses agree with the experiment results well. That verifies the validity of the theoretical analysis as well as the rationality of motor design.
[1] Weh H, May H. Achievable force densities for permanent magnet excited machines in new configurations[C]. International Conference on Electrical Machines, Munchen, Germany, 1986: 1107-1111. [2] 李永斌, 施进浩, 江建中. 具有公共联接定子铁心的横向磁场永磁电机二维场模型及磁场分析[J]. 电工技术学报, 2006, 21(8): 5-6. Li Yongbin, Shi Jinhao, Jiang Jianzhong. 2-D magnetic field model and analysis of a novel transverse flux permanent-magnet machine with common linking core[J]. Transactions of China Electrotechnical Society, 2006, 21(8): 5-6. [3] Larisa S, Viorel I A. On the designing procedure of a permanent magnet transverse flux generator (PMTFG) with specific topology[C]. International Conference on Optimization of Electrical and Electronic Equipment, Brasov, Romania, 2008: 99-104. [4] Hosseini S, Moghani J S, Ershad N F, et al. Design, prototyping, and analysis of a novel modular permanent-magnet transverse flux disk generator[J]. IEEE Trans. Magn. , 2011, 47(4): 772-780. [5] 李亚旭. 横向磁通电机拓扑结构初析. 船电技术, 2003, 23(1): 8-12. Li Yaxu. Tentative analysis on topological strueture of transverse flux motor[J]. Marine Electric & Electric Technology, 2003, 23(1): 8-12. [6] Hong D K, Woo B C, Koo D H, et al. Optimum design of transverse flux linear motor for weight reduction and improvement thrust force using response surface methodology[J]. IEEE Trans. Magn. , 2008, 44(11): 4317-4320. [7] Chan T F, Wang W, Lai L L. Performance of an axial-flux permanet magnet synchronous generator from 3-D finite-element analysis[J]. IEEE Trans. Energy Conv. , 2010, 25(3): 669-676. [8] 刘哲民, 陈谢杰, 陈丽香, 等. 基于3D-FEM的新型横向磁通永磁电机的研究[J]. 电工技术学报, 2006, 21(5): 19-20. Liu Zhemin, Chen Xiejie, Chen Lixiang, et al. Study of a new transverse flux permanent magnet machine based on 3D-FEM[J]. Transactions of China Electrotechnical Society, 2006, 21(5): 19-20. [9] Cosic A, Sadarangani C, Timmerman J. Design and manufac-turing of a linear transverse flux permanent magnet machines[C]. Industry Applications Soc. Annu. Meeting, 2008: 5 pages. [10] 施进浩, 李永斌, 江建中. 聚磁式横向磁场永磁电机自定位转矩研究[J]. 电工技术学报, 2005, 20(3): 36-37. Shi Jinhao, Li Yongbin, Jiang Jianzhong. Research on the cogging torque of a novel transverse flux permanent-magnetic machine with the concentrated flux rotor[J]. Transactions of China Electrotechnical Society, 2005, 20(3): 36-39. [11] Bang D J, Polinder H, Shrestha G, et al. Design of a lightweight transverse flux permanent magnet machine for direct drive wind turbines[C]. Industry Applications Soc. Annu. Meeting, 2008: 7 pages. [12] Guo Y G, Zhu J G, Watterson P A, et al. Comparative study of 3-d flux electrical machines with soft magnetic composite cores[J]. IEEE Transactions on Industry Applications, 2003, 39(6): 1696-1703. [13] Patterson G, Koseki T, Aoyama Y, et al. Simple modeling and prototype experiments for a new high- thrust, low-speed permanent magnet disk motor[C]. Proc. Int. Conf. Electr. Machines Systems, 2009: 6 pages. [14] Zou J, Wang Q, Xu Y. Influence of the permanent magnet magnetization length on the performance of a tubular transverse flux permanent magnet linear machine used for electromagnetic launch[J]. IEEE Trans. Plasma Sci. , 2011, 39(1): 241-246. [15] Svechkarenko D, Soulard J, Sadarangani C. Performance evaluation of a novel transverse flux generator with 3D finite element analysis[C]. Proc. Int. Conf. Electr. Machines Systems, 2009: 6 pages.
2012, Vol. 27 
