Abstract：The nozzle structure of high voltage SF6 circuit breaker directly affects the interruption performance. In this paper, based on the former investigation results of the turbulent flow and its influence on dielectric recovery property in arc nozzle of SF6 high voltage circuit breaker, a novel idea of fully considering the turbulent control affects to the supersonic speed flow in arc nozzle is proposed for increasing the dielectric recovery speed and the optimization design of arc nozzle structure is realized, in which the multi “expand-shrink” profile nozzle of 550kV SF6 circuit breaker is chosen as the investigation object. The structure parameters of nozzle profile are taken as the optimization variables and the POWELL algorithm is improved and adopted as optimization strategy. Simulation result of non-load breaking under optimized arc nozzle structure shows that the dielectric recovery property satisfies the cold breaking requirement.
王尔智, 刘晓明, 曹云东. 考虑湍流影响的高压SF6断路器喷口优化设计[J]. 电工技术学报, 2009, 24(6): 30-34.
Wang Erzhi, Liu Xiaoming, Cao Yundong. Optimization Design for Arc Nozzle of High Voltage SF6 Circuit Breaker Considering Turbulent Influence. Transactions of China Electrotechnical Society, 2009, 24(6): 30-34.
[1] 常梓雄, 董增尚. 黏性流体力学[M]. 北京: 清华大学出版社, 1998. [2] Potter M C, Wiggert D C. Mechanics of fluid [M]. 北京: 机械工业出版社, 2008. [3] 王璞. 国外SF6断路器灭弧室小型化中采用的新技术和几种灭弧室结构[J]. 高压电器, 1997, 33(4): 55-60. [4] 关盛楠, 王尔智, 等. SF6高压断路器喷口中的湍流及其对介质恢复特性影响的研究[J]. 中国电机工程学报, 2007, 27(36): 31-35. [5] 刘晓明. 高压SF6断路器电弧动态数学模型及喷口结构优化设计[D]. 沈阳: 沈阳工业大学, 2003. [6] Yan J D, Fang M T C. Visualization of arcing process in an auto-expansion circuit breaker[J]. IEEE Trans. on Plasma Science. 1999, 27(5): 794-981. [7] Yan J D, Fang M T C, Hall W. The development of PC based cad tools for auto-expansion circuit breaker design[J]. IEEE Trans. on Power Delivery, 1999, 14(1): 176-181. [8] Hesselle M D, Trépanier J Y. Comparison of CFD tools for SF6 self-blast circuit breaker development[J]. IEEE Trans. on Power Delivery, 2003, 18(2): 468- 474. [9] 王福军, 计算流体力学分析——CFD软件原理与应用[M]. 北京: 清华大学出版社, 2004. [10] 曹云东, 王尔智. 高压断路器气流场有限体积及TVD格式的研究[J]. 电工技术学报, 2002, 17(1): 68-73. [11] 曹云东. 高压SF6断路器介质恢复特性的计算与分析[D]. 沈阳: 沈阳工业大学, 2001. [12] 王连鹏, 王尔智, 等. 高压SF6断路器空载截至恢复特性数值模拟中的耦合计算方法[J]. 电工技术学报, 2007, 22(6): 59-64.
2009, Vol. 24 
