基于水平集的接触角算法及在RTV憎水性检测中的应用

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (927 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Static contact angle is an important index of material hydrophobicity, but it is difficult to be obtained automatically and accurately. In this paper, droplet edge is obtained automatically by geometric active contour model based on the level set method after the droplet figure is obtained. The level set method obtains the droplet edge by solving partial differential equation, and if the droplet figure is relative clear, then the edge can be obtained relative accurately. If the volume of droplet is small, the edge of droplet figure is a part of circle. Then the obtained edge is divided into arc part and horizontal line part according to certain rule. The circle center, radius and vertical coordinates of horizontal line are obtained by least square fitting method according to coherent equation, and the static contact angle is calculated by circle parameters and intersection point of air, liquid and solid. The method is applied to simulated and real droplet figure of (room temperature vulcanization RTV) silicone rubber coating, and the result is compared to the method in which the edge is obtained manually, and the result indicates the proposed method has high accurate. The proposed method is helpful for study of automatic and accurate measurement of static contact angle.

Key words： Silicone rubber hydrophobicity static contact angle level set least square

Received: 14 July 2009 Published: 04 March 2014

PACS:	TM215.2
	TP391.41

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2010/V25/I12/30

[1] 祁兵, 唐良瑞, 赵春辉. 绝缘子憎水性图像水珠/水迹形状提取算法[J]. 电工技术学报, 2008, 23(6)：19-24.
Qi Bing, Tang Liangrui, Zhao Chunhui. Algorithm of distilling information of hydrophobic image of insulators[J]. Transactions of China Electro-technical Society, 2008, 23(6)：19-24.
[2] 唐良瑞, 张晶, 孙毅. 基于信息测度和Hausdorff 距离的复合绝缘子憎水性等级判定[J]. 电工技术学报, 2009, 24(1)：35-41.
Tang Liangrui, Zhang Jing, Sun Yi. Estimating the level of hydrophobicity of composite insulators based on information measures and hausdorff distance[J]. Transactions of China Electrotechnical Society, 2009, 24(1)：35-41.
[3] 田建华, 袁建州. 合成绝缘表面憎水性分级方法介绍[J]. 华北电力技术, 1998(5)：33-35.
Tian Jianhua, Yuan Jianzhou. Introduction of com- posite insulator surface hydrophobicity classification method[J]. North China Electric Power, 1998(5): 33-35.
[4] 宁乔, 朱志强, 吕旭涛, 等. 图像法求液滴表面张力和接触角[J]. 空间科学学报, 2008, 28(1)：74-75.
Ning Qiao, Zhu Zhiqiang, Lu Xutao, et al. Determine the surface tension and contact angle of drop by image processing method[J]. Chinese Journal of Space Science, 2008, 28(1)：74-75.
[5] Bateni A, Susnar S S, Amirfazli A, et al. A high- accuracy polynomial fitting approach to determine contact angles[J]. Colloids and Surfaces A: Physicochem. Eng, 2003, 219(1-3)：215-231.
[6] Stalder A F, Kulik G, Sage D, et al. A snake-based approach to accurate determination of both contact points and contact angles[J]. Colloid Surface A：Physicochem. Eng, 2006, 286(1-3)：92-103.
[7] Kass M, Witkin A, Terzopoulos D. Snakes: active contour models[J]. International Journal of Computer Vision, 1995, 1(4)：321-331.
[8] Osher S, Sethian J A. Fronts propagating with curvature dependent speed: algorithms based on Hamilton-Jacobi formulations[J]. Journal of Computational Physics, 1988, 79(1)：12-49.
[9] 钱芸, 张英杰. 水平集的图像分割方法综述[J]. 中国图象图形学报, 2008, 13(1)：7-13.
Qian Yun, Zhang Yingjie. Level set methods and its application on image segmentation[J]. Journal of Image and Graphics, 2008, 13(1)：7-13.
[10] Carre A. Phénomè d′interface agents de surface[M]. Paris: Editions Technip, 1989.
[11] 陈宝林. 最优化理论与算法[M]. 北京：清华大学出版社, 1989.