[1] Zhou Bo, Liu Bo, Zhang Shengen.The advancement of 7XXX series aluminum alloys for aircraft structures: a review[J]. Metals, 2021, 11(5): 718.
[2] Psyk V, Risch D, Kinsey B L, et al.Electromagnetic forming—a review[J]. Journal of Materials Processing Technology, 2011, 211(5): 787-829.
[3] Li Xiaoxiang, Cao Quanliang, Lai Zhipeng, et al.Bulging behavior of metallic tubes during the electromagnetic forming process in the presence of a background magnetic field[J]. Journal of Materials Processing Technology, 2020, 276: 116411.
[4] Ouyang Shaowei, Li Changxing, Du Limeng, et al.Electromagnetic forming of aluminum alloy sheet metal utilizing a low-frequency discharge: a new method for attractive forming[J]. Journal of Materials Processing Technology, 2021, 291: 117001.
[5] 邱立, 李彦涛, 苏攀, 等. 电磁成形中电磁技术问题研究进展[J]. 电工技术学报, 2019, 34(11): 2247-2259.
Qiu Li, Li Yantao, Su Pan, et al.Research on electromagnetic problems in electromagnetic forming process[J]. Transactions of China Electrotechnical Society, 2019, 34(11): 2247-2259.
[6] Tang Yinghao, Li Xiaoxiang, Zhang Yi, et al.Design of pulsed magnet for adjusting the residual stress field in large-size aluminum alloy rings[J]. IEEE Transactions on Applied Superconductivity, 2022, 32(6): 1-5.
[7] Pawar S, Kore S D.Electromagnetic forming and perforation of Al tubes[J].Journal of Mechanical Science and Technology, 2019, 33(12): 5999-6007.
[8] Qiu Li, Yu Yijie, Wang Ziwei, et al.Analysis of electromagnetic force and deformation behavior in electromagnetic forming with different coil systems[J]. International Journal of Applied Electromagnetics and Mechanics, 2018, 57(3): 337-345.
[9] Li Zhangzhe, Han Xiaotao, Cao Quanliang, et al.Design, fabrication, and test of a high-strength uniform pressure actuator[J]. IEEE Transactions on Applied Superconductivity, 2016, 26(4): 1-5.
[10] Li Xiaoxiang, Cao Quanliang, Lai Zhipeng, et al.Bulging behavior of metallic tubes during the electromagnetic forming process in the presence of a background magnetic field[J]. Journal of Materials Processing Technology, 2020, 276: 116411.
[11] 熊奇, 周丽君, 杨猛, 等. 单脉冲电磁成形中洛伦兹力在时间上的双向竞争关系及其对成形效果的影响[J]. 电工技术学报, 2022, 37(14):3453-3463
Xiong Qi, Zhou Lijun, Yang Meng, et al.The two-way competitive relationship of Lorentz force in time in single pulse electromagnetic forming and its influence on forming effect[J]. Transactions of China Electrotechnical Society, 2022, 37(14): 3453-3463
[12] Yu Haiping, Xu Zhidan, Fan Zhisong, et al.Mechanical property and microstructure of aluminum alloy-steel tubes joint by magnetic pulse welding[J]. Materials Science and Engineering: A, 2013, 561: 259-265.
[13] 熊奇, 朱鑫辉, 赵翔, 等. AZ31镁合金管件电磁吸引式成形动态特性研究[J]. 电工技术学报, 2023, 38(10): 2577-2588, 2636.
Xiong Qi, Zhu Xinhui, Zhao Xiang, et al.Research of dynamic characteristics in electromagnetic attraction forming of AZ31 magnesium alloy tube[J]. Transactions of China Electrotechnical Society, 2023, 38(10): 2577-2588, 2636.
[14] 张望, 王于東, 李彦涛, 等. 基于双向电磁力加载的管件电磁翻边理论与实验[J]. 电工技术学报, 2021, 36(14): 2904-2911
Zhang Wang, Wang Yudong, Li Yantao, et al.Theory and experiment of tube electromagnetic flanging based on bidirectional electromagnetic force loading[J]. Transactions of China Electrotechnical Society, 2021, 36(14): 2904-2911
[15] Ouyang Shaowei, Wang Chen, Li Changxing, et al.Improving the uniformity and controllability of tube deformation via a three-coil forming system[J].The International Journal of Advanced Manufacturing Technology, 2021, 114(5/6): 1533-1544.
[16] Qiu Li, Li Yantao, Yu Yijie, et al.Electromagnetic force distribution and deformation homogeneity of electromagnetic tube expansion with a new concave coil structure[J]. IEEE Access, 2019, 7: 117107-117114.
[17] Zhang Xiao, Ouyang Shaowei, Li Xiaoxiang, et al.Effect of pulse width of middle-coil current on deformation behavior in electromagnetic tube forming under two-stage coils system[J].The International Journal of Advanced Manufacturing Technology, 2020, 110(5/6): 1139-1152.
[18] 邱立, 杨新森, 常鹏, 等. 双线圈轴向压缩式管件电磁胀形电磁力分布规律与管件成形性能研究[J]. 电工技术学报, 2019, 34(14): 2855-2862.
Qiu Li, Yang Xinsen, Chang Peng, et al.Electromagnetic force distribution and forming performance in electromagnetic tube expansion process with two coils[J]. Transactions of China Electrotechnical Society, 2019, 34(14): 2855-2862.
[19] 邱立, 余一杰, 聂小鹏, 等. 管件电磁胀形过程中的材料变形性能问题与电磁力加载方案[J]. 电工技术学报, 2019, 34(2): 212-218
Qiu Li, Yu Yijie, Nie Xiaopeng, et al.Study on material deformation performance and electromagnetic force loading in electromagnetic tube expansion process[J]. Transactions of China Electrotechnical Society, 2019, 34(2): 212-218
[20] Cao Quanliang, Li Liang, Lai Zhipeng, et al.Dynamic analysis of electromagnetic sheet metal forming process using finite element method[J]. The International Journal of Advanced Manufacturing Technology, 2014, 74(1): 361-368.
[21] Ouyang Shaowei, Li Xiaoxiang, Li Changxing, et al.Investigation of the electromagnetic attractive forming utilizing a dual-coil system for tube bulging[J]. Journal of Manufacturing Processes, 2020, 49: 102-115. |