一种基于耦合电感的高增益软开关谐振变换器

doi:10.19595/j.cnki.1000-6753.tces.221942

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1838 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

Fuel cell is a kind of clean energy with high efficiency and high power density, which has a good application prospect in automobile, aerospace and other fields. This paper presents a new type of resonant converter with high gain and soft switching for fuel cell. The resonant converter uses the coupling inductor to improve the voltage gain. The topology mainly consists of two parts: Boost circuit and resonant circuit. The resonant circuit is superimposed on the Boost circuit, and the output voltage of the two is superimposed to increase the voltage gain. The Boost circuit consists of the magnetic inductance of the coupled inductor and two switches, the auxiliary switches are equivalent to ordinary Boost diodes. The circuit is a unidirectional high-gain circuit. The purpose of using MOSFETs in the auxiliary switches is not to achieve bidirectional energy flow, but to ensure that the main switches can realize zero voltage opening and improve efficiency. The active clamping technique is used for the primary soft switch and synchronous rectification to reduce losses. The resonant circuit is composed of the auxiliary side of the coupled inductor, the leakage inductance of the coupled inductor, the resonant capacitor, two diodes and the output capacitance.
The voltage boost ratio depends not only on the duty ratio, but also on the variation ratio of the coupling inductor, which has the advantage of high gain. In addition, due to the active clamp technology, the energy in the leakage inductance can be recovered and utilized to provide energy for the charging and discharging of the junction capacitor of the switches, so as to realize the soft switching. Due to the coupled inductor, the proposed converter can achieve higher output voltage at lower voltage stress, so low voltage devices with low on-resistance can be used to improve the efficiency of the system. In this paper, the operation principle of the proposed converter is analyzed, and the expressions are derived theoretically. On this basis, the conditions of obtaining soft switch of the converter are analyzed theoretically. Besides, the voltage and current stress of each device of the converter are analyzed and the selection method of the output capacitor is given, which provides a theoretical basis for device selection.
In the experiment, a 1kW rated prototype is made, and the experiment is carried out for the performance of the proposed converter, such as high step-up, soft switching, low voltage stress, high efficiency and etc. The input voltage is 40V and the output voltage is 380V, which can realize the 9.5 voltage gain. All switching tubes can realize ZVS soft switching operation, and all diodes can realize ZCS operation. Because all switches have soft switching operation, and the switching current stress is small, the peak efficiency of the proposed converter is about 97.5% under 10 times boost ratio which verifies the superiority of the proposed topology.

Key words： Coupled inductor resonant converter high step-up soft switching

Received: 10 October 2022

PACS:

TM131.3

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhe Wang
	Chi Li
	Zedong Zheng
	Yongdong Li

Cite this article:

Zhe Wang,Chi Li,Zedong Zheng等. A High Step-up ZVS/ZCS Resonant Converter Based on Coupled Inductor[J]. Transactions of China Electrotechnical Society, 0, (): 8908-.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.221942 OR https://dgjsxb.ces-transaction.com/EN/Y0/V/I/8908

[1] Blaabjerg F, Chen Zhe, Kjaer S B.Power electronics as efficient interface in dispersed power generation systems[J]. IEEE Transactions on Power Electronics, 2004, 19(5): 1184-1194.
[2] Maksimovic D, Cuk S.Switching converters with wide DC conversion range[J]. IEEE Transactions on Power Electronics, 1991, 6(1): 151-157.
[3] Barreto L H S C, Coelho E A A, Farias V J, et al. A quasi-resonant quadratic boost converter using a single resonant network[J]. IEEE Transactions on Industrial Electronics, 2005, 52(2): 552-557.
[4] Zhao Jing, Han Yunlong, He Xiangning, et al.Multilevel circuit topologies based on the switched-capacitor converter and diode-clamped converter[J]. IEEE Transactions on Power Electronics, 2011, 26(8): 2127-2136.
[5] Gao Feng, Loh P C, Teodorescu R, et al.Diode-assisted buck-boost voltage-source inverters[J]. IEEE Transactions on Power Electronics, 2009, 24(9): 2057-2064.
[6] Qian Wei, Cao Dong, Cintron-Rivera J G, et al. A switched-capacitor DC-DC converter with high voltage gain and reduced component rating and count[J]. IEEE Transactions on Industry Applications, 2012, 48(4): 1397-1406.
[7] Kwon J M, Kwon B H.High step-up active-clamp converter with input-current doubler and output- voltage doubler for fuel cell power systems[J]. IEEE Transactions on Power Electronics, 2009, 24(1): 108-115.
[8] Zhang Zhe, Ouyang Ziwei, Thomsen O C, et al.Analysis and design of a bidirectional isolated DC-DC converter for fuel cells and supercapacitors hybrid system[J]. IEEE Transactions on Power Electronics, 2012, 27(2): 848-859.
[9] Wai R J, Duan R Y.High step-up converter with coupled-inductor[J]. IEEE Transactions on Power Electronics, 2005, 20(5): 1025-1035.
[10] Adib E, Farzanehfard H.Zero-voltage transition current-fed full-bridge PWM converter[J]. IEEE Transactions on Power Electronics, 2009, 24(4): 1041-1047.
[11] Liu Hongchen, Li Fei, Ai Jian.A novel high step-up dual switches converter with coupled inductor and voltage multiplier cell for a renewable energy system[J]. IEEE Transactions on Power Electronics, 2016, 31(7): 4974-4983.
[12] Middlebrook R D.A continuous model for the tapped-inductor boost converter[C]//1975 IEEE Power Electronics Specialists Conference, Culver City, CA, USA, 2015: 63-79.
[13] Vazquez N, Estrada L, Hernandez C, et al.The tapped-inductor boost converter[C]//2007 IEEE International Symposium on Industrial Electronics, Vigo, Spain, 2007: 538-543.
[14] Packnezhad M, Farzanehfard H.Soft-switching high step-up/down converter using coupled inductors with minimum number of components[J]. IEEE Transactions on Industrial Electronics, 2021, 68(9): 7938-7945.
[15] Zhao Qun, Lee F C.High-efficiency, high step-up DC-DC converters[J]. IEEE Transactions on Power Electronics, 2003, 18(1): 65-73.
[16] Santra S B, Chatterjee D, Siwakoti Y P, et al.Generalized switch current stress reduction technique for coupled-inductor-based single-switch high step-up boost converter[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2021, 9(2): 1863-1875.
[17] Zaoskoufis K, Tatakis E C.A thorough analysis for the impact of the coupling coefficient on the behavior of the coupled inductor high step-up converters[J]. IEEE Transactions on Power Electronics, 2020, 35(8): 8287-8302.
[18] Zheng Yifei, Brown B, Xie Wenhao, et al.High step- up DC-DC converter with zero voltage switching and low input current ripple[J]. IEEE Transactions on Power Electronics, 2020, 35(9): 9416-9429.
[19] Zheng Y, Smedley K M. analysis and design of a single-switch high step-up coupled-inductor boost converter[J]. IEEE Transactions on Power Electronics, 2020, 35(1): 535-545.
[20] Kwon J M, Kim E H, Kwon B H, et al.High-efficiency fuel cell power conditioning system with input current ripple reduction[J]. IEEE Transactions on Industrial Electronics, 2009, 56(3): 826-834.
[21] Ye Yuanmao, Cheng K W E, Chen Sizhe. A high step-up PWM DC-DC converter with coupled-inductor and resonant switched-capacitor[J]. IEEE Transactions on Power Electronics, 2017, 32(10): 7739-7749.
[22] Deng Yan, Rong Qiang, Li Wuhua, et al.Single-switch high step-up converters with built-In transformer voltage multiplier cell[J]. IEEE Transactions on Power Electronics, 2012, 27(8): 3557-3567.
[23] 孙瑄, 荣德生, 王宁. 具有谐振软开关的高增益耦合电感组合Boost-Zeta变换器[J/OL].电工技术学报, 2023:1-13.
[24] 林雪凤, 许建平, 周翔. 谐振软开关耦合电感高增益DC-DC变换器[J]. 电工技术学报, 2019, 34(4): 747-755.
Lin Xuefeng, Xu Jianping, Zhou Xiang.Soft-switched high step-up DC-DC converter with coupled inductor of resonance[J]. Transactions of China Electrotechnical Society, 2019, 34(4):747-755.