基于Energetic模型的机械应力作用下电工钢片磁滞特性模拟

doi:10.19595/j.cnki.1000-6753.tces.220421

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (18658 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The electric steel sheets are widely used in the iron cores of electrical equipment such as transformers, motors, and reactors. However, in the actual processing and operation, the iron cores will be subjected to varying degrees of tensile or compressive stress, which will cause significant changes in the magnetic hysteresis characteristics of electrical steel sheets and affect the operating performance of the iron cores. Therefore, it is necessary to accurately simulate the magnetic hysteresis characteristics of electrical steel sheet under mechanical stress for the iron cores optimization design.
At present, the simulation methods of magnetic hysteresis characteristics under mechanical stress are mainly divided into three categories: the method based on Preisach model, the method based on multiscale model and the method based on Jiles-Atherton (J-A) model. Among them, the method based on Preisach model is a pure mathematical method, and cannot explain the mechanism of mechanical stress on magnetization characteristics of magnetic materials. The method based on multiscale model has a clear physical basis, but it can only simulate the anhysteretic curve. The method based on J-A model need to solve a nonlinear differential equation, and the calculation process is relatively complex. Therefore, a novel method is needed to accurately simulate the magnetic hysteresis characteristics of electrical steel sheets under mechanical stress.
Compared with the above models, Energetic hysteresis model has the advantages of simple expression and high calculation efficiency, and it can also consider the influence of mechanical stress on magnetic hysteresis characteristics. Therefore, this paper based on the original Energetic hysteresis model, the energy density caused by mechanical stress as an additional term is introduced into the total energy density of electrical steel sheets. Then according to the principle of energy balance, the field separation technology is used to realize the conversion of the energy density components to magnetic field components. Finally, considering the dependence of each parameter in Energetic model on mechanical stress, the principle of field superposition is used to establish a magnetic hysteresis model of electrical steel sheets under mechanical stress.
Taking the grain-oriented silicon steel sheet as an example, the results show that under tensile and small compressive stress (less than-7.09 MPa), the overall accuracy of simulated results is high, and the root mean square error is less than 5 A/m, which proves the accuracy of the proposed method. When the compressive stress is large (-8.86 MPa and-10.63 MPa), the root mean square error becomes larger and is close to 10 A/m, but the overall fitting is acceptable. The reason why the error increases with the increase of compressive stress is that the magnetic domain structure changes significantly when the compressive stress increases. The decrease of experimental measurement accuracy is also one of the reasons for the large simulation error. Although the tensile stress and compressive stress are measured separately and the measurement is carried out incrementally from small stress to large stress in order to reduce the experimental errors, the measurement errors would gradually accumulate during the process of increasing compressive stress. The results also show that each parameter in the model is significantly dependent on the mechanical stress, and different parameters has different dependence on the mechanical stress, and the same parameter has different dependence on compression and tensile stress. Therefore, it is necessary to consider the stress dependence of model parameters to simulate the hysteresis characteristics of electrical steel sheet under mechanical stress. In order to further clarify the influence law of mechanical stress on magnetic hysteresis characteristics, the coercivity, loss density and remanence under the action of mechanical stress are analyzed by simulation and experiment. And the average relative errors are 3.93%, 3.12% and 7.81%, respectively.

Key words： Electrical steel sheet mechanical stress magnetic hysteresis characteristics Energetic model

Received: 23 March 2022

PACS:

TM271

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Chen Hao
	Li Lin
	Liu Yang

Cite this article:

Chen Hao,Li Lin,Liu Yang. Simulation of Magnetic Hysteresis Characteristics of Electrical Steel Sheet under Mechanical Stress Based on Energetic Model[J]. Transactions of China Electrotechnical Society, 2023, 38(12): 3101-3111.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.220421 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I12/3101

[1] 赵志刚, 徐曼, 胡鑫剑. 基于改进损耗分离模型的铁磁材料损耗特性研究[J]. 电工技术学报, 2021, 36(13): 2782-2790.
Zhao Zhigang, Xu Man, Hu Xinjian.Research on magnetic losses characteristics of ferromagnetic materials based on improvement loss separation model[J]. Transactions of China Electrotechnical Society, 2021, 36(13): 2782-2790.
[2] Krings A, Boglietti A, Cavagnino A, et al.Soft magnetic material status and trends in electric machines[J]. IEEE Transactions on Industrial Electronics, 2017, 64(3): 2405-2414.
[3] 陈彬, 秦小彬, 万妮娜, 等. 基于R-L型分数阶导数与损耗统计理论的铁磁材料高频损耗计算方法[J]. 电工技术学报, 2022, 37(2): 299-310.
Chen Bin, Qin Xiaobin, Wan Nina, et al.Calculation method of high-frequency loss of ferromagnetic materials based on R-L type fractional derivative and loss statistical theory[J]. Transactions of China Electrotechnical Society, 2022, 37(2): 299-310.
[4] Aydin U, Martin F, Rasilo P, et al.Rotational single sheet tester for multiaxial magneto-mechanical effects in steel sheets[J]. IEEE Transactions on Magnetics, 2019, 55(3): 1-10.
[5] Ahmed U, Aydin U, Daniel L, et al.3-D magneto-mechanical finite element analysis of galfenol-based energy harvester using an equivalent stress model[J]. IEEE Transactions on Magnetics, 2021, 57(2): 1-5.
[6] 段娜娜, 徐伟杰, 李永建, 等. 基于极限磁滞回线法的软磁复合材料磁特性模拟[J]. 电工技术学报, 2018, 33(20): 4739-4745.
Duan Nana, Xu Weijie, Li Yongjian, et al.Electromagnetic property modeling of the soft magnetic composite material based on the limiting loop method[J]. Transactions of China Electrotechnical Society, 2018, 33(20): 4739-4745.
[7] 李伊玲, 李琳, 刘任. 机械应力作用下电工钢片静态磁滞特性模拟方法研究[J]. 中国电力, 2020, 53(10): 10-18.
Li Yiling, Li Lin, Liu Ren.Modeling methods of static hysteresis characteristics of electrical steel sheets under stress[J]. Electric Power, 2020, 53(10): 10-18.
[8] Daniel L, Hubert O, Buiron N, et al.Reversible magneto-elastic behavior: a multiscale approach[J]. Journal of the Mechanics and Physics of Solids, 2008, 56(3): 1018-1042.
[9] Daniel L, Domenjoud M.Anhysteretic magneto-elastic behaviour of terfenol-D: experiments, multiscale modelling and analytical formulas[J]. Materials (Basel, Switzerland), 2021, 14(18): 5165.
[10] Sablik M J, Kwun H, Burkhardt G L, et al.Model for the effect of tensile and compressive stress on ferromagnetic hysteresis[J]. Journal of Applied Physics, 1987, 61(8): 3799-3801.
[11] Sablik M, Jiles D.Coupled magnetoelastic theory of magnetic and magnetostrictive hysteresis[J]. IEEE Transactions on Magnetics, 1993, 29: 2113-2123.
[12] 刘任, 李琳, 王亚琦, 等. 基于随机性与确定性混合优化算法的Jiles-Atherton磁滞模型参数提取[J]. 电工技术学报, 2019, 34(11): 2260-2268.
Liu Ren, Li Lin, Wang Yaqi, et al.Parameter extraction for Jiles-Atherton hysteresis model based on the hybrid technique of stochastic and deterministic optimization algorithm[J]. Transactions of China Electrotechnical Society, 2019, 34(11): 2260-2268.
[13] Sai Ram B, Baghel A P S, Kulkarni S V, et al. A frequency-dependent scalar magneto-elastic hysteresis model derived using multi-scale and Jiles-Atherton approaches[J]. IEEE Transactions on Magnetics, 2020, 56(3): 1-5.
[14] Bernard L, Mailhé B J, Ávila S L, et al.Magnetic hysteresis under compressive stress: a multiscale-Jiles-Atherton approach[J]. IEEE Transactions on Magnetics, 2020, 56(2): 1-4.
[15] Sablik M J.A model for asymmetry in magnetic property behavior under tensile and compressive stress in steel[J]. IEEE Transactions on Magnetics, 1997, 33(5): 3958-3960.
[16] 罗旭, 朱海燕, 丁雅萍. 基于力磁耦合效应的铁磁材料修正磁化模型[J]. 物理学报, 2019, 68(18): 289-300.
Luo Xu, Zhu Haiyan, Ding Yaping.A modified model of magneto-mechanical effect on magnetization in ferromagnetic materials[J]. Acta Physica Sinica, 2019, 68(18): 289-300.
[17] Singh D, Martin F, Rasilo P, et al.Magnetomechanical model for hysteresis in electrical steel sheet[J]. IEEE Transactions on Magnetics, 2016, 52(11): 1-9.
[18] 贲彤, 陈芳媛, 陈龙, 等. 考虑力-磁耦合效应的无取向电工钢片磁致伸缩模型的改进[J]. 中国电机工程学报, 2021, 41(15): 5361-5370.
Ben Tong, Chen Fangyuan, Chen Long, et al.An improved magnetostrictive model of non-oriented electrical steel sheet considering force-magnetic coupling effect[J]. Proceedings of the CSEE, 2021, 41(15): 5361-5370.
[19] Jiles D C, Kiarie W.An integrated model of magnetic hysteresis, the magnetomechanical effect, and the barkhausen effect[J]. IEEE Transactions on Magnetics, 2021, 57(2): 1-11.
[20] Hauser H, Melikhov Y, Jiles D C.Examination of the equivalence of ferromagnetic hysteresis models describing the dependence of magnetization on magnetic field and stress[J]. IEEE Transactions on Magnetics, 2009, 45(4): 1940-1949.
[21] 赵志刚, 马习纹, 姬俊安, 等. 谐波激励条件下铁心动态Energetic建模与验证[J]. 电工技术学报, 2020, 35(20): 4241-4250.
Zhao Zhigang, Ma Xiwen, Ji Junan, et al.Dynamic Energetic modeling and verification of core under harmonic excitation[J]. Transactions of China Electrotechnical Society, 2020, 35(20): 4241-4250.
[22] Hauser H.Energetic model of ferromagnetic hysteresis: isotropic magnetization[J]. Journal of Applied Physics, 2004, 96(5): 2753-2767.
[23] Hauser H.Energetic model of ferromagnetic hysteresis[J]. Journal of Applied Physics, 1994, 75(5): 2584-2597.
[24] Liu Ren, Li Lin.Calculation method of magnetic material losses under DC bias using statistical loss theory and energetic hysteresis model[J]. IEEE Transactions on Magnetics, 2019, 55: 1-4.
[25] 赵志刚, 马习纹, 姬俊安. 基于Energetic模型的直流偏磁条件下电工钢片磁特性模拟及实验验证[J]. 中国电机工程学报, 2020, 40(14): 4656-4665.
Zhao Zhigang, Ma Xiwen, Ji Junan.Simulation and Experimental verification of magnetic characteristics of electrical steel sheet under DC bias based on Energetic model[J]. Proceedings of the CSEE, 2020, 40(14): 4656-4665.
[26] Perevertov O, Schäfer R.Magnetic properties and magnetic domain structure of grain-oriented Fe-3%Si steel under compression[J]. Materials Research Express, 2016, 3(9): 096103.
[27] Li Yang, Zhu Jianguo, Zhu Lihua, et al.A dynamic magnetostriction model of grain-oriented sheet steels based on Becker-döring crystal magnetization model and Jiles-Atherton theory of magnetic hysteresis[J]. IEEE Transactions on Magnetics, 2020, 56(3): 1-5.
[28] 刘任, 李琳. 基于模拟退火与Levenberg-Marquardt混合算法的Energetic磁滞模型参数提取[J]. 中国电机工程学报, 2019, 39(3): 875-884, 966.
Liu Ren, Li Lin.Parameter extraction for Energetic hysteresis model based on the hybrid algorithm of simulated annealing and Levenberg-Marquardt[J]. Proceedings of the CSEE, 2019, 39(3): 875-884, 966.