中频圆导线变压器漏感的精确解析计算

doi:10.19595/j.cnki.1000-6753.tces.201024

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2045 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract As the critical power component of fly-back DC/DC converter, excessive leakage inductance of the medium-frequency transformer causes the peak voltage on the switching device which can not be ignored. In addition, in resonant DC/DC converter, the leakage inductance needs to be matched with resonant capacitance and frequency, so that the circuit can reach the ideal working state. So it is very important to calculate the leakage inductance of transformer accurately when designing DC/DC converter. The existing numerical methods for calculating leakage inductance cannot be flexibly applied in transformer design, so analytical methods are widely used. At present, most analytical methods for leakage inductance of round conductor transformer under medium frequency are based on the equivalent method. However, after equivalence, the insulation area of transformer window is larger, and the calculation result of leakage inductance is not accurate enough. In addition, there is an analytical method proposed to directly analyze the frequency effect of round conductor under medium frequency, but the irregular gap between turns is ignored, resulting in inaccurate leakage inductance calculation result. Therefore, a more accurate analytical calculation method of leakage inductance is proposed in this paper, which not only analyzes the frequency effect of the round conductor, but also takes the irregular gap between turns into account, so as to improve the analytical calculation accuracy of leakage inductance. Finally, based on the transformer prototypes, the experiment verified the correctness and effectiveness of the proposed method.

Key words： Round conductor transformer under medium frequency leakage inductance frequency effect of round conductor irregular gap between turns analytical calculation method

Received: 11 August 2020

PACS:

TM432

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yin Hao
	Su Jianhui
	Lai Jidong
	Yu Xiang
	Jin Ling

Cite this article:

Yin Hao,Su Jianhui,Lai Jidong等. Accurate Analytical Calculation of Leakage Inductance of Round Conductor Transformer under the Medium Frequency[J]. Transactions of China Electrotechnical Society, 2021, 36(15): 3211-3220.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.201024 OR https://dgjsxb.ces-transaction.com/EN/Y2021/V36/I15/3211

[1] 章治国, 刘俊良, 郭强, 等. 基于脉冲频率调制的高增益隔离软开关直流变换器[J]. 电工技术学报, 2019, 34(2): 297-305.
Zhang Zhiguo, Liu Junliang, Guo Qiang, et al.A high step-up isolated soft-switching DC-DC converter with pulse frequency modulation[J]. Transactions of China Electrotechnical Society, 2019, 34(2): 297-305.
[2] 张峰, 谢运祥, 胡炎申, 等. 临界模式混合光伏微型逆变器的特性分析[J]. 电工技术学报, 2020, 35(6): 1290-1302.
Zhang Feng, Xie Yunxiang, Hu Yanshen, et al.Characteristics analysis for a boundary conduction mode hybrid-type photovoltaic micro-inverter[J]. Transactions of China Electrotechnical Society, 2020, 35(6): 1290-1302.
[3] 吴琨, 钱挺. 一种高效率高增益的谐振型直流功率变换器[J]. 电力电子技术, 2018, 52(1): 33-35.
Wu Kun, Qian Ting.A novel high-efficiency high step-up resonant DC/DC converter[J]. Power Electronics, 2018, 52(1): 33-35.
[4] 杨玉岗, 吴晗, 关婷婷. 交错并联LLC谐振变换器的磁集成均流特性[J]. 电工技术学报, 2019, 34(12): 2530-2538.
Yang Yugang, Wu Han, Guan Tingting.Magnetic integrated current sharing characteristics of interleaved LLC resonant converter[J]. Transactions of China Electrotechnical Society, 2019, 34(12): 2530-2538.
[5] 李朋, 郝治国, 张保会, 等. 基于有限元法的变压器漏感计算在绕组变形中的应用[J]. 电力自动化设备, 2007, 27(7): 49-53.
Li Peng, Hao Zhiguo, Zhang Baohui, et al.Leakage inductance calculation based on finite element method for power transformer and its application to winding deformation analysis[J]. Electric Power Automation Equipment, 2007, 27(7): 49-53.
[6] Hameed K R.Finite element calculation of leakage reactance in distribution transformer wound core type using energy method[J]. Journal of Engineering and development, 2012, 16(3): 297-320.
[7] Hurley W G, Wilcox D J.Calculation of leakage inductance in transformer windings[J]. IEEE Transactions on Power Electronics, 1994, 9(1): 121-126.
[8] Wilson P R, Wilcock R.Frequency dependent model of leakage inductance for magnetic components[J]. Advanced Electromagntics, 2012, 1(3): 99-106.
[9] Maria K.High-frequency magnetic components[M]. 2nd ed. Chichester: John Wiley & Sons, 2014.
[10] Dowell P L.Effects of eddy currents in transformer windings[J]. Proceedings of the Institution of Electrical Engineers, 1966, 113(8): 1387-1394.
[11] 律方成, 郭云翔, 李鹏. 大功率中频变压器漏感计算及其校正方法[J]. 高电压技术, 2016, 42(6): 1702-1707.
Lv Fangcheng, Guo Yunxiang, Li Peng.Calculation and correction method for leakage inductance of high-power medium-frequency transformer[J]. High Voltage Engineering, 2016, 42(6): 1702-1707.
[12] Bahmani M A, Thiringer T.Accurate evaluation of leakage inductance in high-frequency transformers using an improved frequencydependent expression[J]. IEEE Transactions on Power Electron, 2015, 30(10): 5738-5745.
[13] Zhang Ke, Chen Wu, Cao Xiaopeng.Accurate calculation and sensitivity analysis of ieakage inductance of high-frequency transformer with Litz wire winding[J]. IEEE Transcations on Power Electronics, 2020, 35(4): 3951-3962.
[14] Ouyang Z, Zhang J, Hurley W G.Calculation of leakage inductance for high-frequency transformers[J]. IEEE Transactions on Power Electronics, 2015, 30(10): 5769-5775.
[15] Ferreira J A.Improved analytical modeling of conductive losses in magnetic components[J]. IEEE Transactions on Power Electronics, 1994, 9(1): 127-131.
[16] Lammeraner J, Stafl M.Eddy currents[M]. Cleveland, Ohio: CRC Press, 1966.
[17] Perry M, Jones T.Eddy current induction in a solid conducting cylinder with a transverse magnetic field[J]. IEEE Transactions on Magnetics, 1978, 14(4): 227-232.
[18] Marko M, Drazen D.100 kW, 10 kHz medium-frequency transformer design optimization and experimental verification[J]. IEEE Transactions on Power Electronics, 2019, 32(4): 1696-1708.