|
|
A 10 MHz High Frequency DC-DC Power Converter and Its Synchronous Rectification Technology |
Guan Yueshi, Cheng Yi, Shi Zhenyu, Wang Yijie, Xu Dianguo |
College of Electrical Engineering Harbin Institute of Technology Harbin 150001 China |
|
|
Abstract High-frequency power DC-DC converters are widely used in consumer electronics for their smaller size and higher power density. Under high-frequency conditions, the rectifiers use Schottky diodes with extremely fast switching speed. However, the forward voltage drop of Schottky diodes is still high, which limits efficiency. Due to the small switching period, the synchronous rectification control methods are no longer suitable for high-frequency conditions. Therefore, the method to realize synchronous rectification accurately and efficiently at tens of megahertz helps to improve the efficiency of high-frequency power converters. The key to realizing synchronous rectification is the accuracy of a given driving signal. Due to the high-frequency conditions, the traditional synchronous rectification control method can easily generate the error driving signal, which will cause a straight through in the arm in severe cases. To avoid the error of the driving signal, the method of providing the same driving signal for the switches on the primary and secondary sides is adopted. Therefore, there is no inductive component on the non-resonant branch side of the transformer, so the output voltage of the inverter and the input voltage of the rectifier maintain the characteristic of zero phase difference. Meanwhile, the resonant branch is constructed in another side of the transformer, which consists of the leakage inductance and resonant capacitance. In addition, it is necessary to carry out precise parameter design to ensure that the switch works under soft-switching conditions. The difficulty in realizing the abovementioned zero-phase-difference synchronous driving is constructing an air-core transformer with single-side leakage inductance. The nested toroidal air-core transformer without leakage inductance in the inner winding is designed by the outer winding completely wrapping the inner winding. The magnetic flux generated by the inner winding acts as the common magnetic flux of the inner and outer windings. That is, there is almost no leakage inductance on the secondary side. Further, this paper analyzes the modeling and design method of the nested toroidal air-core transformer. By synthesizing the relationship between the reluctance, the magnetic flux, and the transformer inductance matrix, the numerical relationship between the physical structure parameters of the nested toroidal air-core transformer and the transformer parameters is derived from the precise design of the air-core transformer. Moreover, the calculation and Maxwell simulation of the nested toroidal air-core transformer verify the feasibility of the modeling method of the nested toroidal air-core transformer. Based on the nested toroidal air-core transformer manufactured with the combination of multiple PCBs, an experimental prototype with 48 V input and 12 V/28 W output is built. The experimental results verify the effectiveness of the design method of the nested toroidal air-core transformer and the improved frequency synchronous rectification control method. The nested toroidal 3D transformer can optimize to achieve single-side leakage inductance characteristics, further decreasing the small leakage inductance. Additionally, the inductance of the power loop needs to be optimized to reduce the switch voltage oscillation. The parasitic parameters of the circuits affecting synchronous rectification must be considered.
|
Received: 06 July 2022
|
|
|
|
|
[1] Sun Bainan, Zhang Zhe, Andersen M A E. A com-parison review of the resonant gate driver in the silicon MOSFET and the GaN transistor appli-cation[J]. IEEE Transactions on Industry Applications, 2019, 55(6): 7776-7786. [2] Huang Nantian, Wang Da, Lin Lin, et al.Power quality disturbances classification using rotation forest and multi-resolution fast S-transform with data compression in time domain[J]. IET Generation, Trans-mission & Distribution, 2019, 13(22): 5091-5101. [3] Park S, Rivas-Davila J.Duty cycle and frequency modulations in Class-e DC-DC converters for a wide range of input and output voltages[J]. IEEE Transa-ctions on Power Electronics, 2018, 33(12): 10524-10538. [4] Park H P, Jung J H.Power stage and feedback loop design for LLC resonant converter in high-switching-frequency operation[J]. IEEE Transactions on Power Electronics, 2017, 32(10): 7770-7782. [5] Alonso J M, Martínez G, Perdigão M, et al.A systematic approach to modeling complex magnetic devices using SPICE: application to variable indu-ctors[J]. IEEE Transactions on Power Electronics, 2016, 31(11): 7735-7746. [6] Sun Bainan, Zhang Zhe, Andersen M A E. Research of low inductance loop design in GaN HEMT application[C]//44th Annual Conference of the IEEE Industrial Electronics Society, Washington, DC, USA, 2018: 1466-1470. [7] Perreault D J, Hu Jingying, Rivas J M, et al.Opportunities and challenges in very high frequency power conversion[C]//Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Expo-sition, Washington, DC, USA, 2009: 1-14. [8] 徐殿国, 管乐诗, 王懿杰, 等. 超高频功率变换器研究综述[J]. 电工技术学报, 2016, 31(19): 26-36. Xu Dianguo, Guan Yueshi, Wang Yijie, et al.Review on very high frequency power converters[J]. Transa-ctions of China Electrotechnical Society, 2016, 31(19): 26-36. [9] Knott A, Andersen T M, Kamby P, et al.Evolution of very high frequency power supplies[J]. IEEE Journal of Emerging and Selected Topics in Power Elec-tronics, 2014, 2(3): 386-394. [10] Liu Ming, Fu Minfan, Ma Chengbin.Parameter design for a 6.78-MHz wireless power transfer system based on analytical derivation of Class E current-driven rectifier[J]. IEEE Transactions on Power Electronics, 2016, 31(6): 4280-4291. [11] 管乐诗, 施震宇, 王懿杰, 等. 基于Class E谐振电路的隔离型高频DC-DC变换器[J]. 电工技术学报, 2020, 35(22): 4750-4760. Guan Yueshi, Shi Zhenyu, Wang Yijie, et al.An isolated high frequency DC-DC converter based on Class E resonant circuit[J]. Transactions of China Electrotechnical Society, 2020, 35(22): 4750-4760. [12] 伍梁, 孙晓玮, 赵钧, 等. 基于大信号模型的多模块LCC级联变换器输出电压不均衡分析法[J]. 电工技术学报, 2020, 35(24): 5142-5151. Wu Liang, Sun Xiaowei, Zhao Jun, et al.Analysis of output voltage imbalance for cascaded multi-module LCC converters based on large-signal model[J]. Transactions of China Electrotechnical Society, 2020, 35(24): 5142-5151. [13] 高璐, 徐策, 董光冬, 等. 基于电磁仿真软件的平面变压器共模电磁干扰建模方法及其应用[J]. 电工技术学报, 2020, 35(24): 5057-5063. Gao Lu, Xu Ce, Dong Guangdong, et al.Common mode electro-magnetic interference modeling method of planar transformers based on CST software and its application[J]. Transactions of China Electrotechnical Society, 2020, 35(24): 5057-5063. [14] Zhang Junming, Liao Jiawen, Wang Jianfeng, et al.A current-driving synchronous rectifier for an LLC resonant converter with voltage-doubler rectifier structure[J]. IEEE Transactions on Power Electronics, 2012, 27(4): 1894-1904. [15] Fu Dianbo, Liu Ya, Lee F C, et al.A novel driving scheme for synchronous rectifiers in LLC resonant converters[J]. IEEE Transactions on Power Elec-tronics, 2009, 24(5): 1321-1329. [16] 张少腾, 赵晋斌, 吴月宝, 等. 基于自互感调节的无线电能传输用E类逆变器软开关技术研究[J]. 电工技术学报, 2021, 36(21): 4558-4566. Zhang Shaoteng, Zhao Jinbin, Wu Yuebao, et al.Research on soft switching technology of Class E inverter based on self mutual-inductance regulation in wireless power transfer[J]. Transactions of China Electrotechnical Society, 2021, 36(21): 4558-4566. [17] Wang Fan, McDonald B A, Langham J, et al. A novel adaptive synchronous rectification method for digitally controlled LLC converters[C]//2016 IEEE Applied Power Electronics Conference and Expo-sition, Long Beach, CA, USA, 2016: 334-338. [18] Xu Shengyou, Qian Qinsong, Tao Tao, et al.Syn-chronous rectification using resonant capacitor voltage for secondary side resonant active clamp flyback converter[C]//2020 IEEE Applied Power Electronics Conference and Exposition, New Orleans, LA, USA, 2020: 2926-2931. [19] Tong Zikang, Braun W D, Rivas-Davila J M. Design and fabrication of three-dimensional printed air-core transformers for high-frequency power applications[J]. IEEE Transactions on Power Electronics, 2020, 35(8): 8472-8489. [20] Hurley W G, Duffy M C, Zhang Jun, et al.A unified approach to the calculation of self-and mutual-inductance for coaxial coils in air[J]. IEEE Transa-ctions on Power Electronics, 2015, 30(11): 6155-6162. [21] Ramo S, Whinnery J R, Van Duzer T.Fields and waves in communication electronics[M]. Hoboken: John Wiley & Sons, 1994. [22] 刘晓东, 董保成, 吴慧辉, 等. 基于并联变压器切换的LLC谐振变换器宽范围效率优化控制策略[J].电工技术学报, 2020, 35(14): 3018-3029. Liu Xiaodong, Dong Baocheng, Wu Huihui, et al.Wide range efficiency optimization control strategy for LLC resonant converter based on parallel trans-former switching[J]. Transactions of China Electro-technical Society, 2020, 35(14): 3018-3029. |
|
|
|