|
|
|
| Inductance Analysis of Two-Phase Slotless Tubular Permanent Magnet Synchronous Linear Motor |
| Zhang Chunlei1,2, Zhang Hui1,2, Ye Peiqing1,2, Zhang Luhong1,2 |
1. Department of Mechanical Engineering Tsinghua University Beijing 100084 China;
2. Beijing Key Laboratory of Precision/Ultra-Precision Manufacturing Equipments and Control Tsinghua University Beijing 100084 China |
|
|
|
|
Abstract The inductances of two-phase slotless tubular permanent magnet synchronous linear motor (TPMSLM) are affected by the disconnection of windings and the change of coupling length. This makes the inductance change complicated and difficult to implement sensorless control. Therefore, the inductance of TPMSLM needs to be accurately modeled. Firstly, the axial magnetomotive force function and the axial specific permeance function were utilized to derive the analytical model in the fully coupled state. Then the domain of the axial specific permeance function was extended and the inductance expression in the whole moving range was calculated. The expression was verified by finite element method. And the characteristics of the inductance and the influence of the coupling length were analyzed. Finally, the inductance of a prototype was measured and compared with the analytical result. The maximum error between the two results is 0.04mH, which proves the correctness of the analytical model.
|
|
Received: 07 May 2020
|
|
|
|
|
|
[1] Wang J B, Howe D.Tubular modular permanent- magnet machines equipped with quasi-halbach magnetized magnets-part I: magnetic field distri- bution, EMF, and thrust force[J]. IEEE Transactions on Magnetics, 2005, 41(9): 2470-2478.
[2] Abdalla I I, Ibrahim T, Nor N M.Analysis of tubular linear motors for different shapes of magnets[J]. IEEE Access, 2018, 6: 10297-10310.
[3] Paul S, Chang J, Rajan A, et al.Design of linear magnetic position sensor used in permanent magnet linear machine with consideration of manufacturing tolerances[J]. IEEE Sensors Journal, 2019, 19(13): 5239-5248.
[4] Morimoto S, Kawamoto K, Sanada M, et al.Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame[J]. IEEE Transactions on Industry Applications, 2002, 38(4): 1054-1061.
[5] Yoon Y D, Sul S K, Morimoto S, et al.High- bandwidth sensorless algorithm for AC machines based on square-wave-type voltage injection[J]. IEEE Transactions on Industry Applications, 2011, 47(3): 1361-1370.
[6] Cupertino F, Pellegrino G, Giangrande P, et al.Sensorless position control of permanent-magnet motors with pulsating current injection and com- pensation of motor end effects[J]. IEEE Transactions on Industry Applications, 2011, 47(3): 1371-1379.
[7] 张春雷, 张辉, 叶佩青, 等. 两相圆筒型永磁同步直线电机无传感算法[J]. 电工技术学报, 2019, 34(23): 4901-4908.
Zhang Chunlei, Zhang Hui, Ye Peiqing, et al.Research on sensorless algorithm of two-phase tubular permanent magnet synchronous linear motor[J]. Transactions of China Electrotechnical Society, 2019, 34(23): 4901-4908.
[8] Sul S, Kwon Y, Lee Y.Sensorless control of IPMSM for last 10 years and next 5 years[J]. CES Transa- ctions on Electrical Machines and Systems, 2017, 1(2): 91-99.
[9] Zhu Z, Howe D, Mitchell J.Magnetic field analysis and inductances of brushless DC machines with surface-mounted magnets and non-overlapping stator windings[J]. IEEE Transactions on Magnetics, 1995, 31(3): 2115-2118.
[10] Wang J B, Jewell G W, Howe D.A general framework for the analysis and design of tubular linear permanent magnet machines[J]. IEEE Transa- ctions on Magnetics, 1999, 35(3): 1986-2000.
[11] Chiba A, Nakamura F, Fukao T, et al.Inductances of cageless reluctance-synchronous machines having nonsinusoidal space distributions[J]. IEEE Transa- ctions on Industry Applications, 1991, 27(1): 44-51.
[12] Dutta R, Rahman M, Chong L.Winding inductances of an interior permanent magnet (IPM) machine with fractional slot concentrated winding[J]. IEEE Transa- ctions on Magnetics, 2012, 48(12): 4842-4849.
[13] Chen Hong, Li Dawei, Qu Rongjun, et al.An improved analytical model for inductance calculation of interior permanent magnet machines[J]. IEEE Transactions on Magnetics, 2014, 50(6): 1-8.
[14] Chong L, Rahman M.Saliency ratio derivation and optimisation for an interior permanent magnet machine with concentrated windings using finite- element analysis[J]. IET Electric Power Applications, 2010, 4(4): 249-258.
[15] El-Refaie A M, Zhu Z Q, Jahns T M, et al. Winding inductances of fractional slot surface-mounted per- manent magnet brushless machines[C]//IEEE Industry Applications Society Meeting, Alberta, Canada, 2008: 1-8.
[16] 刘治鑫, 王东, 余中军, 等. 基于磁性槽楔修正模型的感应电动机气隙磁场的分布磁路法[J]. 电工技术学报, 2019, 34(15): 3112-3123.
Liu Zhixin, Wang Dong, Yu Zhongjun, et al.Distributed magnetic circuit method for calculating air-gap magnetic field of induction motor based on modified model considering the effect of magnetic slot wedges[J]. Transactions of China Electro- technical Society, 2019, 34(15): 3112-3123.
[17] 赵镜红, 张晓锋, 张俊洪, 等. 圆筒永磁直线同步电机磁场和推力分析[J]. 电机与控制学报, 2010, 14(1): 12-17.
Zhao Jinghong, Zhang Xiaofeng, Zhang Junhong, et al.Field and thrust analysis of tubular permanent magnet linear synchronous motor[J]. Electric Machines and Control, 2010, 14(1): 12-17.
[18] 于吉坤, 李立毅, 张江鹏, 等. 定子开槽永磁同步电机气隙比磁导解析计算[J]. 电工技术学报, 2016, 31(增刊1): 45-52.
Yu Jikun, Li Liyi, Zhang Jiangpeng, et al.Analytical calculation of air-gap relative permeance in slotted permanent magnet synchronous motor[J]. Transa- ctions of China Electrotechnical Society, 2016, 31(S1): 45-52.
[19] Zhang Hailin, Kou Baoquan, Wang Liqiang, et al.A new inductance measurement method for permanent magnet synchronous linear motor[C]//17th Inter- national Conference on Electrical Machines and Systems, Hangzhou, China, 2015: 1-5. |
|
|
|
2021, Vol. 36 
