|
|
|
| Rotational Magnetic Hysteresis of Soft Magnetic Composite Materials Based on the Elemental Operator Method |
| Duan Nana1, Xu Weijie2, Li Yongjian3, Wang Shuhong1, Zhu Jianguo4 |
1. State Key Laboratory of Electrical Insulation and Power Equipment School of Electrical Engineering Xi’an Jiaotong University Xi’an 710049 China;
2. State Grid Shaanxi Electric Power Company Economic Research Institute Xi’an 710065 China;
3. Province-Ministry Joint Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability Hebei University of Technology Tianjin 300130 China;
4. Faculty of Engineering and Information Technology University of Technology Sydney Sydney NSW 2007 Australia; |
|
|
|
|
Abstract The paper introduces a vector elemental operator with biaxial anisotropy based on the underlying magnetization mechanisms of the magnetic material. Detailed analysis of the magnetic properties of one elemental operator under rotational magnetization has been presented thereafter. With the help of the proposed vector elemental operator, the rotational magnetic hysteresis of soft magnetic composite material is simulated. The simulation results are compared with the experimental results obtained by the 3-D magnetic property measurement system. The good agreement shows the validity and practicability of the elemental operator method in the modelling of the rotational magnetic hysteresis.
|
|
Received: 10 May 2017
Published: 24 May 2018
|
|
|
|
Corresponding Authors:
Wang Shuhong male, E-mail: shwang@mail.xjtu.edu.cn
|
|
|
|
[1] Zhang Yanli, Peng Zhihua, Xie Dexin, et al.Effect of
different magnetization curves on simulation for transformer core loss under DC bias[J]. Transactions of China Electrotechnical Society, 2014, 29(5): 44-48.
[2] Dupré L, Melkebeek J.Electromagnetic hysteresis modelling: from material science to finite element analysis of devices[J]. ICS-Newsletter, 2003(10): 4-15.
[3] Li Huiqi, Li Xiaomeng, Li Jinzhong, et al.An improved transformer model considering of the losses and hysteresis of the core[J]. Transactions of China Electrotechnical Society, 2016, 31(21): 196-202.
[4] Bai Baodong, Zhao Xiaoxuan, Chen Dezhi, et al.Simulation and experiment research on transformer excitation current under DC magnetic bias based on J-A model[J]. Transactions of China Electrotechnical Society, 2013, 28(2): 162-166.
[5] Guo Mansheng, Mei Guihua, Zhang Xile, et al.Calculation of losses in single phase three limb transformer under DC-biasing[J]. Transactions of China Electrotechnical Society, 2010, 25(7): 67-71.
[6] Zhao Xiaojun, Li Lin, Cheng Zhiguang, et al.Analysis of magnetizing characteristic of laminated core based on the DC-biasing experiment[J]. Transa- ctions of China Electrotechnical Society, 2011, 26(1): 7-13.
[7] Zhu Jianguo, Guo Youguang, Lin Zhiwei, et al.Development of PM transverse flux motors with soft magnetic composite cores[J]. IEEE Transactions on Magnetics, 2011, 47(10): 4376-4383.
[8] Li Yongjian, Zhu Jianguo, Yang Qingxin, et al.Study on rotational hysteresis and core loss under three dimensional magnetization[J]. IEEE Transactions on Magnetics, 2011, 47(10): 3520-3523.
[9] Shokrollahi H, Janghorban K.Soft magnetic com- posite materials (SMCs)[J]. Journal of Materials Processing Technology, 2007, 189: 1-12.
[10] Li Yongjian, Yang Qingxin, Zhu Jianguo, et al.Magnetic properties measurement of soft magnetic composite materials over wide range of excitation frequency[J]. IEEE Transactions on Industry Appli- cations, 2012, 48(1): 88-97.
[11] Li Dandan, Liu Fugui, Li Yongjian, et al. Magnetic properties modeling of soft magnetic composite materials using two-dimensional vector hybrid hysteresis model[J]. Journal of Applied Physics, 2014, 115(7): 17D117.
[12] Li Dandan, Liu Fugui, Li Yongjian, et al.A new definition of the hysteron in hybrid vector hysteresis model[J]. Transactions of China Electrotechnical Society, 2015, 30(1): 15-21.
[13] Duan Nana, Xu Weijie, Wang Shuhong, et al.Hysteresis modeling of high-temperature super- conductor using simplified Preisach model[J]. IEEE Transactions on Magnetics, 2015, 51(3): 7300904.
[14] Duan Nana, Xu Weijie, Wang Shuhong, et al. A new Preisach type hysteresis model of high temperature superconductors[J]. Journal of Applied Physics, 2015, 117(17): 17A718.
[15] Xu Weijie, Duan Nana, Wang Shuhong, et al.A stress-dependent magnetic hysteresis model for soft magnetic composite materials[J]. IEEE Transactions on Applied Superconductivity, 2016, 26(7): 0611305.
[16] Guo Youguang, Zhu Jianguo, Dorrell D G.Design and analysis of a claw pole permanent magnet motor with molded soft magnetic composite core[J]. IEEE Transactions on Magnetics, 2009, 45(10): 4582-4585.
[17] Li Yongjian, Yang Qingxin, Zhu Jianguo, et al.Research of three-dimensional magnetic reluctivity tensor based on measurement of magnetic pro- perties[J]. IEEE Transactions on Applied Super- conductivity, 2010, 20(3): 1932-1935.
[18] Li Yongjian, Zhu Jianguo, Yang Qingxin, et al.Measurement of soft magnetic composite material using an improved 3-D tester with flexible excitation coils and novel sensing coils[J]. IEEE Transactions on Magnetics, 2010, 46(6): 1971-1974.
[19] Jiles D C.Introduction to magnetism and magnetic materials[M]. CRC press, New York: Chapman and Hall, 1998: 150-152.
[20] Bertotti G.Hysteresis in magnetism: for physicists, materials scientists, and engineers[M]. San Diego: Academic Press, 1998.
[21] K H J Buschow. Handbook of magnetic materials[M]. Holland: Elsevier, 2015.
[22] Petrila I, Stancu A.Hysteresis characteristics of an analytical vector hysteron[J]. Physica B: Condensed Matter, 2011, 406(4): 906-910.
[23] Kahler G R, Della Torre E, Cardelli E.Imple- mentation of the Preisach-Stoner-Wohlfarth classical vector model[J]. IEEE Transactions on Magnetics, 2016, 46(1): 21-28.
[24] Li Yongjian, Yang Qingxin, Zhu Jianguo, et al.Design and analysis of a novel 3-D magnetization structure for laminated silicon steel[J]. IEEE Transa- ctions on Magnetics, 2014, 50(2): 389-392. |
|
|
|
2018, Vol. 33 
