无线电能传输用S/CLC补偿拓扑分析

doi:10.19595/j.cnki.1000-6753.tces.L70566

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (20687 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper proposes a novel compensation topology, named as S/CLC. It can achieve constant voltage output, zero phase angle (ZPA) and zero voltage switching (ZVS). It is also free from the constraints imposed by loosely coupled transformer parameters. All above mentioned merits are analyzed in theory and verified by experiments. The optimization of a circular pad is also studied via simulation since the properties of the loosely coupled transformer have significant impacts on the performance of wireless power transfer system. A circular pad is manufactured under the guide of optimization results. The coupling coefficient of this circular pad agrees well with the simulation results, demonstrating the feasibility of the optimization.

Key words： Wireless power transfer (WPT), constant voltage output, circular pad design, zero phase angle (ZPA), zero voltage switching (ZVS)

Received: 20 August 2016 Published: 05 December 2017

PACS:

TM724

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Yijie
	Yao Yousu
	Liu Xiaosheng
	Xu Dianguo

Cite this article:

Wang Yijie,Yao Yousu,Liu Xiaosheng等. Analysis on S/CLC Compensation Topology for Wireless Power Transfer[J]. Transactions of China Electrotechnical Society, 2017, 32(22): 34-41.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L70566 OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I22/34

[1] 马皓, 周雯琪. 电流型松散耦合电能传输系统的建模分析[J]. 电工技术学报, 2005, 20(10): 70-75.
Ma Hao, Zhou Wenqi. Modeling analysis of inductively coupled power transfer systems based on current source resonant converter[J]. Transactions of China Electrotechnical Society, 2005, 20(10): 70-75.
[2] 苏玉刚, 张宁, 方少乾, 等. 同步整流技术在ICPT系统中的应用[J]. 电工技术学报, 2013, 28(12): 313-318.
Su Yugang, Zhang Ning, Fang Shaoqian, et al. Application of synchronous rectifiers in inductive coupled power transfer system[J]. Transactions of China Electrotechnical Society, 2013, 28(12): 313-318.
[3] Wang C S, Covic G A, Stielau O H. Investigating an LCL load resonant inverter for inductive power transfer applications[J]. IEEE Transactions on Power Electronics, 2004, 19(4): 995-1002.
[4] Wang C S, Covic G A, Stielau O H. Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems[J]. IEEE Transactions on Industrial Electronics, 2004, 51(1): 148-157.
[5] 周雯琪, 马皓, 何湘宁. 感应耦合电能传输系统不同补偿拓扑的研究[J]. 电工技术学报, 2009, 24(1): 133-139.
Zhou Wenqi, Ma Hao, He Xiangning. Investigation on different compensation topologies in inductively coupled power transfer system[J]. Transactions of China Electrotechnical Society, 2009, 24(1): 133-139.
[6] Li Siqi, Li Weihan, Deng Junjun, et al. A double- sided LCC compensation network and its tuning method for wireless power transfer[J]. IEEE Transa- ctions on Vehicular Technology, 2015, 64(6): 2261- 2273.
[7] Li Weihan, Zhao Han, Li Siqi, et al. Integrated LCC compensation topology for wireless charger in electric and plug-in electric vehicles[J]. IEEE Transa- ctions on Industrial Electronics, 2015, 62(7): 4215-4225.
[8] Zhu Qingwei, Wang Lifang, Guo Yanjie, et al. Applying LCC compensation network to dynamic wireless EV charging system[J]. IEEE Transactions on Industrial Electronics, 2016, 63(10): 6557-6567.
[9] Budhia M, Covic G A, Boys J T. Design and optimization of circular magnetic structures for lumped inductive power transfer systems[J]. IEEE Transactions on Power Electronics, 2011, 26(11): 3096-3108.
[10] Budhia M, Boys J T, Covic G A, et al. Development of a single-sided flux magnetic coupler for electric vehicle IPT charging systems[J]. IEEE Transactions on Industrial Electronics, 2013, 60(1): 318-328.
[11] Zhang Wei, White J C, Abraham A M, et al. Loosely coupled transformer structure and interoperability study for EV wireless charging systems[J]. IEEE Transactions on Power Electronics, 2015, 30(11): 6356-6367.
[12] Hu Chao, Sun Yue, Tang Chunsen, et al. Optimal design of electromagnetic coupling mechanism for ICPT system[C]//IEEE 8th Conference on Industrial Electronics and Applications (ICIEA), Melbourne, VIC, 2013: 1233-1237.
[13] Li Wenjing, Li Xiaokun, Zhang Junkun, et al. Research on loosely coupled transformer's structure for ICPT system[C]//International Conference on Industrial Informatics-Computing Technology, Intel- ligent Technology, Industrial Information Integration (ICIICII), Wuhan, China, 2015: 272-275.
[14] Nishimura T H, Eguchi T, Hirachi K, et al. A large air gap flat transformer for a transcutaneous energy transmission system[C]//IEEE 25th Annual Meeting on Power Electronics Specialists Conference (PESC'94), Taipei, China, 1994: 1323-1329.
[15] Iwawaki K, Watada M, Takatani S, et al. The design of core-type transcutaneous energy transmission systems for artificial heart[C]//30th Annual Con- ference on Industrial Electronics Society (IECON 2004), Busan, Korea, 2004: 948-952.
[16] Steigerwald R L. A comparison of half-bridge resonant converter topologies[J]. IEEE Transactions on Power Electronics, 1988, 3(2): 174-182.
[17] Knaisch K, Gratzfeld P. Comparison of magnetic couplers for inductive electric vehicle charging using accurate numerical simulation and statistical methods[C]// The 5th International Electric Drives Production Conference (EDPC), Nuremberg, 2015: 1-10.