一种基于损耗模型的双有源桥DC-DC变换器效率优化方法

doi:10.19595/j.cnki.1000-6753.tces.170628

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (28218 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper focuses on the loss model and efficiency optimization of dual active bridge (DAB) DC-DC converter. First, the single phase modulation principle is shown and the current RMS value is derived analytically. Voltage transfer ratio is introduced to characterize the current waveform, which is related to the transformer ratio. The energy loss of DAB can be divided into two parts, one from device power dissipations, and the other from power loss in electromagnetic elements, such as the transformer and inductance. Their loss values are both related to material choices, and also affected by operation states including transfer power, voltage and current value. Combined the current and voltage waveforms with element material features, DAB loss model is built in a steady operation. Furthermore, by numerical calculation of the loss model, voltage transfer ratio and phase shift duty are optimized aiming at high efficiency. At last, a 4kW-DAB platform is built and the optimization method is tested by experimental results.

Key words： Dual active bridge (DAB) DC-DC converter, loss model, high frequency isolated transformer, voltage transfer ratio, efficiency optimization

Received: 12 May 2017 Published: 01 August 2017

PACS:

TM46

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Li Jing
	Yuan Liqiang
	Gu Qing
	Sun Jianning
	Duan Renzhi

Cite this article:

Li Jing,Yuan Liqiang,Gu Qing等. An Efficiency Optimization Method in Dual Active Bridge DC-DC Converter Based on Loss Model[J]. Transactions of China Electrotechnical Society, 2017, 32(14): 66-76.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.170628 OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I14/66

[1] 宗升, 何湘宁, 吴建德, 等. 基于电力电子变换的电能路由器研究现状与发展[J]. 中国电机工程学报, 2015, 35(18): 4559-4570.
Zong Sheng, He Xiangning, Wu Jiande, et al. Overview of power electronics based electrical energy router[J]. Proceedings of the CSEE, 2015, 35(18): 4559-4570.
[2] 赵彪, 宋强, 刘文华, 等. 用于柔性直流配电的高频链直流固态变压器[J]. 中国电机工程学报, 2014, 34(25): 4295-4303.
Zhao Biao, Song Qiang, Liu Wenhua, et al. High- frequency-link DC solid state transformers for flexible DC distribution[J]. Proceedings of the CSEE, 2014, 34(25): 4295-4303.
[3] 赵彪, 于庆广, 孙伟欣. 双重移相控制的双向全桥DC-DC变换器及其功率回流特性分析[J]. 中国电机工程学报, 2012, 32(12): 43-50.
Zhao Biao, Yu Qingguang, Sun Weixin. Bi- directional full-bridge DC-DC converters with dual-phase-shifting control and its backflow power characteristic analysis[J]. Proceedings of the CSEE, 2012, 32(12): 43-50.
[4] 黄珺, 王跃, 李卓强, 等. 基于三重移相控制的双主动全桥直流变换器优化调制策略[J]. 中国电机工程学报, 2016, 36(6): 1658-1666.
Huang Jun, Wang Yue, Li Zhuoqiang, et al. Optimazed modulation scheme of dual active bridge DC-DC converter based on triple-phase-shift control[J]. Proceedings of the CSEE, 2016, 36(6): 1658-1666.
[5] 王跃, 郭海平, 高远. 双向全桥直流变换器的全功率范围软开关控制技术的研究[J]. 电工电能新技术, 2016, 35(1): 7-12.
Wang Yue, Guo Haiping, Gao Yuan. Research on full power range soft-switching control technology of dual active bridge DC-DC converter[J]. Advanced Technology of Electrical Engineering and Energy, 2016, 35(1): 7-12.
[6] Zhao Biao, Song Qiang, Liu Wenhua, et al. Current- stress-optimized switching strategy of isolated bidirectional DC-DC converter with dual-phase-shift control[J]. IEEE Transactions on Industrial Elec- tronics, 2013, 60(10): 4458-4467.
[7] Zhao Lei, Li Haoyu, Hou Yue, et al. Operation analysis of a phase-shifted full-bridge converter during the dead-time interval[J]. IET Power Elec- tronics, 2016, 9(9): 1777-1783.
[8] Zhao Lei, Li Haoyu, Yu Yanxue, et al. A simple control method of phase-shift full bridge converter to reduce the power loss under light load and standby conditions[C]//IEEE Energy Conversion Congress and Exposition, Montreal, QC, Canada, 2015, doi:10.1109/ECCE.2015.7309869.
[9] Florian Krismer, Johann Walterkolar. Efficiency- optimized high-current dual active bridge converter for automotive applications[J]. IEEE Transactions on Industrial Electronics, 2012, 59(7): 2745-2760.
[10] Florian Krismer, Johann Walterkolar. Accurate power loss model derivation of a high-current dual active bridge converter for an automotive application[J]. IEEE Transactions on Industrial Electronics, 2010, 57(3): 881-891.
[11] 陆杨军, 邢岩, 吴红飞, 等. 宽电压范围双移相控制多倍压高增益软开关隔离升降压变换器[J]. 电工技术学报, 2016, 31(13): 10-17.
Lu Yangjun, Xing Yan, Wu Hongfei, et al. Dual-phase-shift-controlled high step-up soft-switch isolated Buck/Boost converter for wide-voltage-range applications[J]. Transaction of China Electro- technical Society, 2016, 31(13): 10-17.
[12] Gabriel Ortiz, Hirofumi Uemura, Dominik Bortis, et al. Modeling of soft-switching losses of IGBTs in high-power high-efficiency dual-active-bridge DC/DC converters[J]. IEEE Transactions on Electron Devices, 2013, 60(2): 587-597.
[13] 师长立, 唐西胜, 李宁宁, 等. 基于全桥隔离双向变换器的直流变换技术[J]. 电工技术学报, 2016, 31(2): 121-127.
Shi Changli, Tang Xisheng, Li Ningning, et al. DC charging technologies based on dual-active-bridge converter[J]. Transaction of China Electrotechnical Society, 2016, 31(2): 121-127.
[14] Reinert J, Brockmeyer A, Waade R. Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation[J]. IEEE Transa- ctions on Industry Applications, 2001, 37(4): 1055- 1061.
[15] Magnetics curve fit equations for ferrite materials[EB/OL]. 1999. Http://www.mag-inc.com.