一种断路器多体动力学仿真方法

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2898 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract A new method of multibody dynamics simulation of circuit breaker is developed based on continuous medium theory. By employing the elastic constitutive equation, the proposed model can be used to analyze the internal stress and strain related to different components of the breakers. The interaction between different parts and the energy transmission also can be studied by applying the linkage constraints to the corresponding boundaries. The proposed method not only can be used to predict the interrupting angular displacement and angular velocity, but also can be used to analyze the linkage and the relationship between the internal stress and strain of each component. Simulation results show that the maximum stress of each component changes over time. Experimental results show that the proposed simulation can be used to predict the interrupting characteristics of breaker with good accuracy. The new method offers a new design guidance to improve the mechanical reliability and the design of the breakers.

Key words： Circuit breaker multibody dynamics continuous medium non-contact measuring

Received: 28 September 2015 Published: 22 March 2017

PACS:

TM561

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Shu Liang
	Wu Lang
	Wu Guichu
	Zhang Shangcong
	Zhang Tengxiang

Cite this article:

Shu Liang,Wu Lang,Wu Guichu等. A New Method of Multibody Dynamics Simulation of Circuit Breakers[J]. Transactions of China Electrotechnical Society, 2017, 32(5): 41-48.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I5/41

[1] 何晓燕,许志红.交流接触器虚拟样机设计技术[J].电工技术学报,2016,31(14):148-155.
He Xiaoyan,Xu Zhihong.Virtual prototyping technology of AC contactor[J].Transactions of China Electrotechnical Society,2016,31(14):148-155.
[2] 缪希仁,王燕.低压断路器振动特性分析与合闸同期性研究[J].电工技术学报,2013,28(6):81-85.
Miao Xiren,Wang Yan.Vibration characteristic analysis and closing synchronization research of low voltage circuit breakers[J].Transactions of China Electrotechnical Society,2013,28(6):81-85.
[3] 李兴文,陈德桂,汪倩,等.低压塑壳断路器三相短路开断特性的仿真分析[J].电工技术学报,2005,20(10):76-82.
Li Xingwen,Chen Degui,Wang Qian,et al.Simulation and analysis of the interruption characteristics of low voltage molded case circuit breakers under 3-phase short circuit[J].Transactions of China Electrotechnical Society,2005,20(10):76-82.
[4] 陈旭,陈德桂.低压断路器开断特性的仿真研究[J].电工技术学报,2001,16(5):46-50.
Chen Xu,Chen Degui.Research on simulation of the interruption of low-voltage circuit breaker[J].Transactions of China Electrotechnical Society,2001,16(5):46-50.
[5] 张敬菽,陈德桂,刘洪武.低压断路器操作机构的动态仿真与优化设计[J].中国电机工程学报,2004,24(3):102-107.
Zhang Jingshu,Chen Degui,Liu Hongwu.Dynamic simulation and optimum design of low-voltage circuit breaker[J].Proceedings of the CSEE,2004,24(3):102-107.
[6] 孙丽琼,王振兴,何塞楠,等.126kV真空断路器分离磁路式永磁操动机构[J].电工技术学报,2015,30(20):49-56.
Sun Liqiong,Wang Zhenxing,He Sainan,et al.A permanent magnetic actuator with separated magnetic circuit for 126 kV vacuum circuit breakers[J].Transactions of China Electrotechnical Society,2015,30(20):49-56.
[7] 杨武,荣命哲,王小华,等.考虑电动力效应的高压断路器动力学特性仿真分析[J].中国电机工程学报,2003,23(5):103-107.
Yang Wu,Rong Mingzhe,Wang Xiaohua,et al.Dynamic simulation of high-voltage circuit breaker concerning electrodynamic force[J].Proceedings of the CSEE,2003,23(5):103-107.
[8] Stammberger H,Pursch H,Zacharias A,et al.Simulation of the temporal behavior of circuit breaker and motor starters[C]//50th IEEE Holm Conference on Electrical Contact,Seattle,USA,2004:35-40.
[9] Meng Yongpeng,Jia Shenli,Rong Mingzhe,et al.Mechanism dynamic simulation and analysis of medium voltage circuit breaker[C]//2002 International Conference on Power System Technology,Kunming,China,2002,3:1619-1623.
[10]王连鹏,王尔智.SF6断路器空载开断下液压操动机构与灭弧室联合仿真研究[J].中国电机工程学报,2005,25(20):118-123.
Wang Lianpeng,Wang Erzhi.Investigation of joint simulation under no load breaking for hydraulic actuator and arc quenching chamber[J].Proceedings of the CSEE,2005,25(20):118-123.
[11]王海峰,王荣芳,洪黎欢,等.运动仿真技术在塑料外壳式断路器操作机构优化设计中的应用[J].低压电器,2009(7):16-19.
Wang Haifeng,Wang Rongfang,Hong Lihuan,et al.Application of dynamic simulation technology in operating machine optimization design of molded case circuit breaker[J].Low Voltage Apparatus,2009(7):16-19.
[12]王东亚,陈德桂.塑壳断路器滑扣现象的仿真分析[J].低压电器,2006(5):3-8.
Wang Dongya,Chen Degui.Simulation study on the sliding misoperation of trip unit in molded case circuit breaker[J].Low Voltage Apparatus,2006(5):3-8.
[13]季良,陈德桂,刘颖异,等.连杆转换位置对MCCB操作机构的影响及其优化[J].电工技术学报,2010,25(9):87-91.
Ji Liang,Chen Degui,Liu Yingyi,et al.Analysis and optimization of linkage transfer position for the operating mechanism of MCCB[J].Transactions of China Electrotechnical Society,2010,25(9):87-91.
[14]林莘,宋立峰,李永祥,等.真空断路器新型电机操动机构的多体动力学仿真[J].电网技术,2012,36(3):76-80.
Lin Xin,Song Lifeng,Li Yongxiang,et al.Multi body dynamics simulation and analysis on novel motor operating mechanism for vacuum circuit breakers[J].Power System Technology,2012,36(3):76-80.
[15]张波,陈德桂.低压断路器操作机构的应力分析[J].低压电器,2007(7):1-4.
Zhang Bo,Chen Degui.Stress analysis of voltage circuit breaker operating mechanisms[J].Low Voltage Apparatus,2007(7):1-4.
[16]李真.基于ADAMS和ANSYS的万能式断路器反回弹冲击载荷下的动力学联合仿真研究[J].低压电器,2014(6):6-8.
Li Zhen.Research of air circuit breaker anti-rebound dynamic simulation under impact loading based on ADAMS and ANSYS[J].Low Voltage Apparatus,2014(6):6-8.
[17]刘路辉,庄劲武,王晨,等.燃弧时间对混合型直流真空断路器分断特性的影响[J].电工技术学报,2015,30(24):55-60.
Liu Luhui,Zhuang Jinwu,Wang Chen,et al.Effect of arcing time upon the interruption characteristic of the hybrid DC vacuum circuit breaker[J].Transactions of China Electrotechnical Society,2015,30(24):55-60.
[18]Zeller P R,Rieder W F.Arc structure,arc motion and gas pressure between laterally enclosed arc runner[J].IEEE Transactions on Components and Packaging Technology,2001,24(3):337-341.
[19]陈德桂,刘庆江,康艳.塑壳断路器操作机构分断速度的影响因素[J].低压电器,2005(12):9-12.
Chen Degui,Liu Qingjiang,Kang Yan.Effect of different factors to the operating velocity of molded case circuit breakers[J].Low Voltage Apparatus,2005(12):9-12.
[20]刘发英,苏秀苹,王禹博.角位移传感器在智能断路器机械特性测试中的应用[J].机床与液压,2013,41(12):23-27.
Liu Faying,Su Xiuping,Wang Yubo.Application of angular displacement sensor to test mechanical characteristics of intelligent molded case circuit breaker[J].Machine Tool & Hydraulics,2013,41(12):23-27.