电磁加载对超声传播特性的影响

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (15360 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In recent years, the detectability of the nonlinear ultrasonic technology on the micro-damage has caused extensive concern. The key problem of the nonlinear ultrasonic technology was how to enhance the nonlinear acoustic response. For this purpose, this paper proposed a new method. The state of the metal closed-crack was changed by the eddy current loading. The ultrasonic had been modulated in the crack area which could produce the nonlinear ultrasonic phenomenon. Through analyzing the loading effects of the eddy current coil on the closed-crack and its dynamic behaviors, the impacts of the electromagnetic (EM) loading parameters on the ultrasonic nonlinear response were discussed. The ultrasonic nonlinear phenomena with the eddy current loading was studied by the modulated ultrasonic echo, and the corresponding relationship between the echo signal and the EM loading is demonstrated. It could provide the theory basis for engineering application of the nonlinear ultrasonic testing method.

Key words： Electromagnetic loading nonlinear phenomenon of the ultrasonic closed crack signal processing

Received: 26 September 2015 Published: 08 February 2017

PACS:

TM15

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhang Chuang
	Li Fubiao
	Liu Suzhen
	Cai Zhichao
	Yang Qingxin

Cite this article:

Zhang Chuang,Li Fubiao,Liu Suzhen等. Impacts of the Electromagnetic Loading on the Propagation of the Ultrasonic Wave[J]. Transactions of China Electrotechnical Society, 2017, 32(2): 102-107.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I2/102

[1] Shamsaei N, Fatemi A. Deformation and fatigue behaviors of case-hardened steels in torsion: experiments and predictions[J]. International Journal of Fatigue, 2009, 31(8-9): 1386-1396.
[2] 耿强, 田淑侠, 黄太回, 等. 基于支持向量机和神经网络方法的应力腐蚀裂纹定量重构[J]. 电工技术学报, 2010, 25(10): 196-199.
Geng Qiang, Tian Shuxia, Huang Taihui, et al. Reconstruction of stress corrosion crack using neural network and support vector machine techniques[J]. Transactions of China Electrotechnical Society, 2010, 25(10): 196-199.
[3] Katunin A, Dragan K, Dziendzikowski M. Damage identification in aircraft composite structures: a case study using various non-destructive testing techni- ques[J]. Composite Structures, 2015, 127: 1-9.
[4] 周封, 李翠, 王晨光. 基于三维超声波阵列的风电场风力瞬变特性测量研究[J]. 电力系统保护与控制, 2012, 40(13): 127-134.
Zhou Feng, Li Cui, Wang Chenguang. Research on wind transient characteristics measurement based on 3D ultrasonic formation for wind farm[J]. Power System Protection and Control, 2012, 40(13): 127- 134.
[5] Ren B Y, Lissenden C J. Phased array transducers for ultrasonic guided wave mode control and identi- fication for aircraft structural health monitoring[J]. Materials Evaluation, 2015, 73(8): 1089-1100.
[6] Szelążek J. Ultrasonic evaluation of residual hoop stress in forged and cast railroads wheels- differences[J]. Journal of Nondestructive Evaluation, 2015, 34(1): 1-13.
[7] 律方成, 金虎, 王子建, 等. 基于组合核多特征融合的GIS局部放电检测与识别[J]. 电工技术学报, 2014, 29(10): 334-340.
Lü Fangcheng, Jin Hu, Wang Zijian, et al. GIS partial discharge detection and recognition based on the kernel combination and multiple feature fusion method[J]. Transactions of China Electrotechnical Society, 2014, 29(10): 334-340.
[8] 张国志, 刘万东. 基于FPGA的超声波测向装置设计[J]. 电力系统保护与控制, 2009, 37(23): 182-184.
Zhang Guozhi, Liu Wandong. Design of ultrasonic direction testing device based on FPGA[J]. Power System Protection and Control, 2009, 37(23): 182- 184.
[9] 赵书涛, 张佩, 申路, 等. 高压断路器振声联合故障诊断方法[J]. 电工技术学报, 2014, 29(7): 216-221.
Zhao Shutao, Zhang Pei, Shen Lu, et al. Vibration and acoustic joint mechanical fault diagnosis method of high voltage circuit breakers[J]. Transactions of China Electrotechnical Society, 2014, 29(7): 216- 221.
[10] Zaitsev V, Nazarov V, Gusev V, et al. Novel nonlinear-modulation acoustic technique for crack detection[J]. NDT & E International, 2006, 39(3): 184-194.
[11] Yan D, Drinkwater B W, Neild S A. Measurement of the ultrasonic nonlinearity of kissing bonds in adhesive joints[J]. NDT & E International, 2009, 42(7): 459-466.
[12] 周正干, 刘斯明. 非线性无损检测技术的研究、应用和发展[J]. 机械工程学报, 2011, 47(8): 2-11.
Zhou Zhenggan, Liu Siming. Nonlinear ultrasonic techniques used in nondestructive testing: a review[J]. Journal of Mechanical Engineering, 2011, 47(8): 2-11.
[13] 焦敬品, 何存富, 吴斌,等. 接触缺陷的振动调制超声导波检测技术研究[J]. 声学学报, 2009, 34(3): 242-248.
Jiao Jingpin, He Cunfu, Wu Bin, et al. Vibro- modulation and guided wave techniques for contact defect detection in plate[J]. Acta Acustica, 2009, 34(3): 242-248.
[14] Sheppard K, Zagrai A, Donskoy D. A non-linear acoustic, vibration modulation technique for the detection monitoring of contact-type defects, including those associated with corrosion[J]. Corrosion Reviews, 2007, 25(1-2): 81-96.
[15] 张闯, 刘素贞, 杨庆新, 等. 基于大电流直接加载的电磁声发射试验研究[J]. 电工技术学报, 2013, 28(1): 101-105.
Zhang Chuang, Liu Suzhen, Yang Qingxin, et al. Experimental study of electro-magnetically induced acoustic emission based on high current loading directly[J]. Transactions of China Electrotechnical Society, 2013, 28(1): 101-105.
[16] Jin L, Liu S Z, Zhang C, et al. Amplitude characteristics of acoustic emission signals induced by electromagnetic exciting[J]. IEEE Transactions on Magnetics, 2012, 48(11): 2953-2956.
[17] 刘素贞, 庄东超, 商士博, 等. 高频涡流加载下闭合裂纹的动态响应特性[J]. 电工技术学报, 2015, 30(18): 246-253.
Liu Suzhen, Zhuang Dongchao, Shang Shibo, et al. Dynamic response characteristics of closed crack with the high frequency eddy current loading[J]. Transactions of China Electrotechnical Society, 2015, 30(18): 246-253.
[18] Van Den Abeele K E A, Sutin A, Carmeliet J, et al. Micro-damage diagnostics using nonlinear elastic wave spectroscopy(NEWS)[J]. NDT & E Inter- national, 2001, 34(4): 239-248.
[19] Hu H F, Staszewski W J, Hu N Q, et al. Crack detection using nonlinear acoustics and piezoceramic transducers—instantaneous amplitude and frequency analysis[J]. Smart Materials and Structures, 2010, 19(6): 322-328.
[20] Jhang K Y. Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: a review[J]. International Journal of Precision Engineering & Manufacturing, 2009, 10(1): 123-135.
[21] Broda D, Staszewski W J, Martowicz A, et al. Modelling of nonlinear crack-wave interactions for damage detection based on ultrasound—a review[J]. Journal of Sound & Vibration, 2014, 333(4): 1097- 1118.