霍尔-铝基板电流检测单元的磁场特性分析

Abstract
Figure/Table
References
Related Citation (5)

Download: PDF (2066 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper presents an analysis for a kind of current measurement unit used in large current motor controllers.The unit contains the AC terminals,the Hall current sensor,and the aluminum plate.There is no magnetic core that is widely used in large current measurement.When the alternating current flows through the terminal,the aluminum plate has an eddy current that can affect the magnetic field distribution in the measurement field and alter the output of the Hall sensor.By combining the variable separation method with the mathematical transformation as well as the magnetic features,the explicit expressions for the magnetic induction density of a two dimensional (2-D) model with finite width of the copper terminal conductor and finite thickness of the aluminum plate is presented.The linearity of the current measurement structure and the effect of the current frequency on measurement are analyzed.Correctness and applicability of the explicit expressions for considering both the copper terminal conductor’s width and the aluminum plate’s thickness in 2D model analysis are verified by finite element simulations.And effectiveness for analyzing practical problems are tested via experiments.

Key words： Hall current measurement without magnetic core aluminum plate eddy-current influence magnetic field analysis

Published: 16 March 2016

PACS:

TM93

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liu Heping
	Xiao Ying
	Liu Qing
	Guo Qiang

Cite this article:

Liu Heping,Xiao Ying,Liu Qing等. Characteristic Analysis of Magnetic Field for Current Measurement Structure with Hall and Aluminum-Plate[J]. Transactions of China Electrotechnical Society, 2016, 31(5): 177-183.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2016/V31/I5/177

[1] 王成元,夏加宽,孙宜标.现代电机控制技术[M].北京:机械工业出版社,2013.
[2] 高景德,王祥珩,李发海.交流电机及其系统的分析[M].北京:清华大学出版社,2005.
[3] 张兴华,姚丹.感应电机直接转矩控制系统的“抗饱和”控制器设计[J].电工技术学报,2014,29(5):181-188.
Zhang Xinghua,Yao Dan.Anti-windup speed controller design for direct torque controlled induction motor drives[J].Transactions of China Electrotechnical Society,2014,29(5):181-188.
[4] 王斌,王跃,郭伟,等.基于定子磁链降阶状态观测的永磁同步电机无差拍直接转矩控制系统[J].电工技术学报,2014,29(3):160-171.
Wang Bin,Wang Yue,Guo Wei,et al.Deadbeat direct torque control of permanent magnet synchronous motor based on reduced order stator flux observer[J].Transactions of China Electrotechnical Society,2014,29(3):160-171.
[5] 高振天,郭立新.电机控制系统中的电流检测技术[J].机电工程技术,2012,41(8):148-150.
Gao Zhentian,Guo Lixin.The current detecting technology of the motor control system[J].Electrical Engineering Technology,2012,41(8):148-150.
[6] 段慧青,何为,肖冬萍,等.基于解析数值法的配电房母排磁场屏蔽[J].电工技术学报,2008,23(8):13-17.
Duan Huiqing,He Wei,Xiao Dongping,et al.Magnetic field shielding for indoor distributing substation busbars based on analytical-numerical method[J].Transactions of China Electrotechnical Society,2008,23(8):13-17.
[7] Du Y P,Cheng T C,Farag A S.Principles of power-frequency magnetic field shielding with flat sheets in a source of long conductors[J].IEEE Transactions on Electromagnetic Compatibility,1996,38(3):450-459.
[8] Moreno P,Olsen R G.A simple theory for optimizing finite width ELF magnetic field shields for minimum dependence on source orientation[J].IEEE Transactions on Electromagnetic Compatibility,1997,39(4):340-348.
[9] Frix W M,Karady G G.A circuital approach to estimate the magnetic field reduction of nonferrous metal shields[J].IEEE Transactions on Electromagnetic Compatibility,1997,39(1):24-32.
[10]Du Y,Xia N H,Chen M L.Joint modeling for conductive plates in low-frequency magnetic shielding[J].IEEE Transactions on Magnetics,2013,49(5):2005-2008.
[11]Moreno P,Olsen R G.A method for estimating magnetic shielding by 2-D-thick planar plates for distribution systems shielding[J].IEEE Transactions on Power Delivery,2010,25(4):2710-2716.
[12]Xia N,Du Y.An efficient modeling method for 3-D magnetic plates in magnetic shielding[J].IEEE Transactions on Electromagnetic Compatibility,2014,56(3):608-614.
[13]Zeng Z,Udpa L,Udpa S.Finite-element model for simulation of ferrite-core eddy-current probe[J].IEEE Transactions on Magnetics,2010,46(3):905-909.
[14]Rosell A,Persson G.Finite element modelling of closed cracks in eddy current testing[J].International Journal of Fatigue,2012,41(8):30-38.
[15]刘素贞,金亮,张闯,等.电磁声发射检测技术的涡流激励方法[J].电工技术学报,2012,27(7):153-159.
Liu Suzhen,Jin Liang,Zhang Chuang,et al.Eddy current exciting method for electromagnetically induced acoustic emission detecting technique[J].Transactions of China Electrotechnical Society,2012,27(7):153-159.
[16]俞集辉.电磁场原理[M].重庆:重庆大学出版社,2007.
[17]Bateman H.Tables of integral transforms[M].New York:McGraw-Hill,1954.
[18]郑君里,杨为理,应启珩.信号与系统[M].北京:高等教育出版社,2000.
[19]赵天池.传感器和探测器的物理原理和应用[M].北京:科学出版社,2008.
[20]雷银照.电磁场[M].北京:高等教育出版社,2010.