|
|
|
| Strain Monitoring with Fiber Grating for Dry-type Air-core Reactor Solidification |
| Zhou Yanhui1,Zhao Zhengang1,Li Yingna1,Zhang Changsheng1,Xie Tao1,Cui Zhigang2,Wang Ke2,Tan Xiangyu2,Li Chuan1 |
1.Faculty of Information Engineering and Automation Kunming University of Science and Technology Kunming 650500 China
2.Yunnan Power Grid Corporation EPRI Kunming 650217 China |
|
|
|
|
Abstract In order to monitor the solidification condition of the dry-type air core reactor,we develop a fiber Bragg grating strain sensor to achieve on-line monitoring for reactor encapsulated strain in solidification.In the production of the dry-type air core reactor encapsulation,the sensor is embedded within the encapsulation so as to monitor the encapsulated strain changes during the solidification process.The results of monitoring show that the shrinkage of the colloid produces negative strain during the solidification process.When the furnace temperature exceeds 50℃,the negative strain of the encapsulation increases gradually with the growth of the solidification time.After about 8 hours,it tends to be stable.The encapsulation is basically solidified completely at this moment.In the cooling process,the strain increases along the negative direction,and stabilizes at around -5 500 με after reaching the room temperature.The monitoring of the encapsulated strain during the solidification process is of significance for ensuring the quality and improving the mechanical properties of the reactor.
|
|
Received: 08 December 2014
Published: 14 September 2015
|
|
|
|
|
|
[1] 付炜平,赵京武,霍春燕.一起35 kV干式电抗器故障原因分析[J].电力电容器与无功补偿,2011,32(1):59-62.
Fu Weiping,Zhao Jingwu,Huo Chunyan.Reason analysis for a 35 kV dry type reactor fault[J].Power Capacitor & Reactive Power Compensation,2011,32(1):59-62.
[2] 王晓静.对500 kV变电站66 kV 2号主变1号并联电抗器B相烧损原因技术分析[J].电源技术应用,2014(3):258.
Wang Xiaojing.For 500 kV substation 66 kV 2 main transformer the 1st shunt reactors B phase burning reasons of technical analysis[J].Power Supply Technologies and Applications,2014(3):258.
[3] Wisnom M R,Gigliotti M,Ersoy N,et al.Mechanisms generating residual stresses and distortion during manufacture of polymer—matrix composite structures[J].Composites Part A:Applied Science and Manufacturing,2006,37(4):522-529.
[4] 李雪芹,周玉敬,庄子龙,等.光纤Bragg光栅传感器监测环氧树脂固化收缩研究[J].材料工程,2012(8):73-77.
Li Xueqin,Zhou Yujing,Zhuang Zilong,et al.Curing shrinkage monitoring in epoxy resin by fiber bragg grating sensors[J].Materials Engineering,2012(8):73-77.
[5] 李川,李英娜,万舟,等.光纤传感器技术[M].北京:科学技术出版社,2012.
[6] 王宏亮,宋娟,冯德全,等.应用于特殊环境的光纤光栅温度压力传感器[J].光学精密工程,2011,19(3):545-551.
Wang Hongliang,Song Juan,Feng Dequan,et al.High temperature-pressure FBG sensor applied to special environments[J].Optics and Precision Engineering,2011,19(3):545-551.
[7] 里冰,武湛君,张博明,等.光纤Bragg光栅监测复合材料固化[J].复合材料学报,2004,21(3):1-5.
Li Bing,Wu Zhanjun,Zhang Boming,et al.Fiber Bragg grating monitoring for composite curing[J].Composite Materials,2004,21(3):1-5.
[8] Parlevliet P P,Bersee H E N,Beukers A.Measurement of (post) curing strain development with fiber Bragg gratings[J].Polymer Testing,2010,29(3):291-301.
[9] 孙丽,李宏男,朱彤,等.FBG应变传感器的动态特性及其应用范围[J].振动与冲击,2006,25(3):29-34.
Sun Li,Li Hongnan,Zhu Tong,et al.Dynamic characteristics and application range of FBG strain sensor[J]. Vibration and Shock,2006,25(3):29-34.
[10]Lee Chin-Hyung,Park Ki-Tae,Joo Bong-Chul,et al.Test-bed for the remote health monitoring system for bridge structures using FBG sensors[C].SPIE Proceedings of SPIE-The International Society for Optical Engineering,Dresden,Germany,2009.
[11]Antonucci V,Cusano A,Giordano M,et al.Cure-induced residual strain build-up in a thermoset resin[J].Composites Part A:Applied Science and Manufacturing,2006,37(4):592-601.
[12]张戌社,宁辰校.光纤Bragg光栅应变传感中的温度补偿技术[J].计量技术,2005(10):3-4.
Zhang Xushe,Ning Chenjiao.Fiber Bragg grating strain sensor temperature compensation technology[J].Measurement Technique,2005(10):3-4.
|
|
|
|
2015, Vol. 30 
