转子磁分路混合励磁同步电机电枢反应磁场与电感特性研究

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (992 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract An optimized hybrid excitation synchronous machine(HESM) with magnetic shunting rotor and brushless field excitation is proposed and flux density distribution is discussed. Armature reaction field and inductance feature of the machine is investigated in comparison with that of permanent magnet synchronous machine(PMSM). It is shown that introduction of excitation winding and magnetic shunting structure has significant effect on armature reaction field of the machine. Inductance feature is determined by the saturation of both axial and radial flux path which vary with field current and armature current. And on this basis, influence of inductance feature on motoring operation is analyzed and the risk of irreversible demagnetization of the magnets is estimated. A novel topology is presented and compared to search the influence of structure variation on inductance feature of the HESM. A 24kW prototype is developed, and the 3D finite element analysis(FEA) results in accordance with measured results validate the inductance variation of the HESM.

Key words： Armature reaction finite element analysis hybrid excitation inductance feature irreversible demagnetization magnetic shunting rotor

Received: 22 April 2011 Published: 14 September 2015

PACS:

TM315

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Dai Ji
	Zhang Zhuoran
	Mu Yang
	Liu Ye

Cite this article:

Dai Ji,Zhang Zhuoran,Mu Yang等. Armature Reaction Field and Inductance Feature Analysis of a Hybrid Excitation Synchronous Machine With Magnetic Shunting Rotor[J]. Transactions of China Electrotechnical Society, 2015, 30(12): 276-283.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2015/V30/I12/276

[1] 夏永洪, 王善铭, 邱阿瑞, 等. 新型混合励磁永磁同步电机齿谐波电动势的协调控制[J]. 电工技术学报, 2012, 27(3): 56-61. Xia Yonghong, Wang Shanming, Qiu Arui, et al. Coordinated control of tooth harmonic emf of novel hybrid excitation permanent magnet synchronous machine[J]. Transactions of China Electrotechnical Society, 2012, 27(3): 56-61.
[2] 杨善水, 张卓然, 杨春源, 等. 基于多环调压控制的混合励磁航空变频交流发电系统[J]. 电工技术学报, 2012, 27(3): 176-180. Yang Shanshui, Zhang Zhuoran, Yang Chunyuan, et al. Aeronautic variable frequency ac generation system based on multi-loop controlled voltage regulator[J]. Transactions of China Electrotechnical Society, 2012, 27(3): 176-180.
[3] Kosaka T, Sridharbabu M, Yamamoto M, et al. Design studies on hybrid excitation motor for main spindle drive in machine tools[J]. IEEE Trans on Industrial Electronics, 2010, 57(11): 3807-3813.
[4] Chen J. T, Zhu Z. Q, Iwasaki S, et al. A novel hybrid- excited switched-flux brushless AC machine for EV/HEV applications[J]. IEEE Trans on Vehicular Technology, 2011, 60(4): 1365-1373.
[5] 朱孝勇, 程明, 赵文祥, 等. 混合励磁电机技术综述与发展展望[J]. 电工技术学报, 2008, 23(1): 30-39. Zhu Xiaoyong, Cheng Ming, Zhao Wenxiang, et al. A overview of hybrid excited electric machine capable of field control[J]. Transactions of China Electrotech- nical Society, 2008, 23(1): 30-39.
[6] 耿伟伟, 张卓然, 于立, 等. 新型并列式混合励磁无刷直流电机结构原理及其磁场调节特性[J]. 电工技术学报, 2013, 28(11): 131-137. Geng Weiwei, Zhang Zhuoran, Yu Li, et al. Operation principle and flux regulation characteristics of a new parallel hybrid excitation blushless dc machine[J]. Transactions of China Electrotechnical Society, 2013, 28(11): 131-137.
[7] Zhang Zhuoran, Yan Yangguang, Yang Shanshui, et al. Principle of operation and feature investigation of a new topology of hybrid excitation synchronous machine[J]. IEEE Trans on Magnetics, 2008, 44(9): 2174-2183.
[8] Jang Seok-Myeong, Jeong Sang-Sub. Armature reaction effect and inductances of moving coil linear oscillatory actuator with unbalanced magnetic circuit[J]. IEEE Trans on Magnetics, 2001, 37(4): 2847-2850.
[9] Atallah K, Zhu Z. Q, Howe D. Armature reaction field and winding inductances of slotless permanent-magnet brushless machines[J]. IEEE Trans on Magnetics, 1998, 34(5): 3737-3744.
[10] Bellara A, Amara Y, Barakat G, et al. Two-dimensional exact analytical solution of armature reaction field in slotted surface mounted PM radial flux synchronous machine[J]. IEEE Trans on Magnetics, 2009, 45(10): 4534-4538.
[11] Rahideh A, Korakianitis T. Analytical magnetic field distribution of slotless brushless permanent magnet motors-Part I. Armature reaction field, inductance and rotor eddy current loss calculations[J]. IET Electric Power Applications, 2012, 6(9): 628-638.
[12] Li Qi, Fan Tao, Wen Xuhui. Armature-reaction magnetic field analysis for interior permanent magnet motor based on winding function theory[J]. IEEE Trans on Magnetics, 2013, 49(3): 1193-1201.
[13] Atallah K, Howe D, Mellor P, et al. Rotor loss in permanent-magnet brushless AC machines[J]. IEEE Trans on Magnetics, 2000, 36(6): 1612-1617.
[14] Zhu Z. Q, Ishak D, Howe D, et al. Unbalanced magnetic forces in permanent-magnet brushless machines with diametrically asymmetric phase win- dings[J]. IEEE Trans on Industry Applications, 2007, 43(6): 1544-1553.
[15] 张飞, 唐任远, 陈丽香, 等. 永磁同步电动机电抗参数研究[J]. 电工技术学报, 2006, 21(11): 7-10. Zhang Fei, Tang Renyuan, Chen Lixiang, et al. Study of the reactance parameters of permanent magnet synchronous motors[J]. Transactions of China Elec- trotechnical Society, 2006, 21(11): 7-10.
[16] Sun Tao, Kwon Soon-O, Lee Suk-Hee, et al. Inves- tigation and comparison of inductance calculation methods in interior permanent magnet synchronous motors[C]. International Conference on Electrical Machines and Systems, Wuhan, China, 2008.
[17] 唐任远等著. 现代永磁电机理论与设计[M]. 北京: 机械工业出版社, 1997: 424-439.
[18] Kong Liang, Wen Xuhui, Fan Tao. Influence of electric excitation path and field current on the inductances of parallel hybrid excitation machine[C]. International Conference on Electrical Machines and Systems, Beijing, China, 2011.
[19] Wang Wenjia, Zhang Zhuoran. Maximum torque control of hybrid excitation synchronous machine drives based on field current self-optimizing method[C]. Conference of the IEEE Industrial Electronics Society (IECON), Vienna, 2013.