适用于温差发电的高效率耦合电感升降压变换器

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (930 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract A high efficiency Boost-Buck converter with coupled inductor (BBC-CI) is proposed for thermoelectric-generator (TEG) power system, where the converter is desired to interface the TEG with low current ripple under wide voltage range and high current. The BBC-CI is built with a Boost cell and a Buck cell cascaded, sharing an inverse coupled filter inductor. Benefiting from the DC magnetic flux counteract, reduced size and power loss of the filter inductor core are achieved with the proposed BBC-CI. Because both of the input and output currents are continuous, the interfacing filter capacitors can be reduced greatly. The operational principle, the influence of coupled inductor and its design considerations are analyzed in detail. The PWM strategy and constant voltage/constant current control strategy for free and seamless free mode transition are also given. A 500W prototype is built with experimental results given to verify the analysis.

Key words： Boost-Buck converter coupled inductor wide input voltage range low-voltage high-current

Received: 10 October 2012 Published: 05 November 2014

PACS:

TM461

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhang Junjun
	Wu Hongfei
	Xing Yan
	Sun Kai

Cite this article:

Zhang Junjun,Wu Hongfei,Xing Yan等. A High Efficiency Boost-Buck Converter with Coupled Inductor for Thermoelectric Generator[J]. Transactions of China Electrotechnical Society, 2014, 29(10): 106-112.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2014/V29/I10/106

[1] Kim Rae Young, Lai Jihsheng. Aggregated modeling and control of a boostbuck cascade converter for maximum power point tracking of a thermoelectric generator[C]. Proceedings of the IEEE Applied Power Electronics Conference and Exposition, 2008: 1754- 1760.
[2] Kim Rae Young, Lai Jihsheng. A seamless mode transfer maximum power point tracking controller for thermoelectric generator applications[C]. Proceedings of the IEEE Industry Applications Society, New Orleans, 2007: 977-984.
[3] Eakburanawat J, Boonyaroonate I. Developmentof a thermoelectric battery-charger with microcontroller based maximum power point tracking technique[J]. Applied Energy, 2006, 83: 687-704.
[4] Cao Dong, Peng Fangzheng. Multiphase multilevel modular DC-DC converter for high current high gain TEG application[J]. IEEE Transactions on Industry Applications, 2011, 47(3): 1400-1408.
[5] Watson R, Hua G C, Lee F C. Characterization of an activeclamp flyback topology for power factor correction applications[J]. IEEE Transactions on Power Electronics, 1996, 11(1): 191-198.
[6] Brkovic M, Cuk S. Input current shaping using Cuk converter[C]. Proceedings of the INTELEC, 1992: 532- 539.
[7] Simonetti D S L, Sebastian J, Reis F s dos, et al. Design criteria for SEPIC and Cuk converters as power factor prerequlators in discontinuous conduction mode[C]. Proceedings of the IEEE IECON, 1992: 282-288.
[8] Chen J, Maksimovic D, Erickson R. Buck-Boost PWM converters having two independently controlled switches[C]. Proceedings of the IEEE Power Electronics Specialists Conference, 2001: 736-741.
[9] Sahu B, Rincon-Mora G A. A low voltage, dynamic, noninverting, synchronous Buck-Boost converter for portable applications[J]. IEEE Transactions on Power Electronics, 2004, 19 (2): 443-452.
[10] Gaboriault M, Notman A. A high efficiency, noninver- ting, Buck-Boost DC-DC converter[C]. Proceedings of the IEEE Applied Power Electronics Conference, 2004, 3: 1411-1415.
[11] Qiao Haibo, Zhang Yicheng, Yao Yongtao, et al. Analysis of Buck-Boost converters for fuel cell electric vehicles[C]. IEEE International Conference on Vehicular Electronics and Safety, Shanghai, China, 2006.
[12] Chen Jingquan, Maksimovic D, Erickson E W. Analysis and design of a low-stress Buck-Boost converter in universal-input PFC applications[J]. IEEE Transactions on Power Electronics, 2006, 21(2): 320-329.
[13] 任小永, 唐钊, 阮新波, 等. 一种新颖的四开关Buck-Boost变换器[J]. 中国电机工程学报, 2008, 28(21): 15-19. Ren Xiaoyong, Tang Zhao, Ruan Xinbo, et al. A novel four switch Buck-Boost converter[J]. Proceedings of the CSEE, 2008, 28(21): 15-19.
[14] 肖华锋, 谢少军. 用于光伏并网的交错型双管Buck-Boost变换器[J]. 中国电机工程学报, 2010, 30(21): 7-12. Xiao Huafeng, Xie Shaojun. An interleaving double- switch Buck-Boost converter for PV grid-connected inverter[J]. Proceedings of the CSEE, 2010, 30(21): 7-12.
[15] Lee Y J, Alireza K, Arindam C, et al. Digital combination of Buck and Boost converters to control a positive Buck-Boost converter and improve the output transients[J]. IEEE Transactions on Power Electronics, 2009, 24(5): 1267-1279.
[16] Zhu G, McDonald B, Wang K. Modeling and analysis of coupled inductors in power converters[J]. IEEE Transactions on Power Electronics, 2011, 26(5): 1355-1363.
[17] 杨玉岗, 李洪珠, 王建林, 等. 可削减直流偏磁集成磁件在DC/DC 变换器中的应用[J]. 中国电机工程学报, 2005, 25(11): 50-54. Yang Yugang, Li Hongzhu, Wang Jianlin, et al. Research on the application of an integrated magnetics whose DC-bias can be reduced in DC/DC converter[J]. Proceedings of the CSEE, 2005, 25(11): 50-54.
[18] 陈乾宏, 阮新波, 严仰光. 开关电源中磁集成技术及其应用[J]. 电工技术学报, 2004, 19(3): 1-8. Chen Qianhong, Ruan Xinbo, Yan Yangguang. Integrated magnetics technology and its application in power supply[J]. Transactions of China Electrotechnical Society, 2004, 19(3): 1-8.