电力机车牵引电机在方波下的控制策略

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (811 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In the traction driving system of high power AC electrical locomotive, the traction motor usually operates under square wave condition. The loss of regulation capacity to voltage makes the traditional vector control can not work anymore. In this paper, a modified vector control based on open loop current control is proposed. Besides, a modified voltage controller is used in order to make the motor achieve maximum torque control during the whole speed range. In the end, a slip frequency correction strategy based on q-axis current error is proposed which can guarantee proper field orientation under square wave. Simulation and experimental results verify the validity of all the control strategy.

Key words： Induction traction motor square wave vector control field weaken maximum torque control field orientation correction

Received: 10 September 2012 Published: 26 March 2014

PACS:

U264.9

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhou Minglei
	You Xiaojie
	Wang Chenchen

Cite this article:

Zhou Minglei,You Xiaojie,Wang Chenchen. Control Strategy of Locomotive Traction Motor Under Square Wave Condition[J]. Transactions of China Electrotechnical Society, 2013, 28(11): 155-162.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2013/V28/I11/155

[1] Bose B K. Modern Power Electronics and AC Drives[M]. Englewood Cliffs, NJ: Prentice-Hall, 2002.
[2] Novotny D W, Lipo T A. Vector control and dynamics of AC drives[M]. Oxford, UK: Oxford University Press, 1996.
[3] Grotstollen H, Wiesing J. Torque capability and control of a saturated induction motor over a wide range of flux weakening[J]. IEEE Transactions on Industrial Electronics, 1995, 42(4): 374-381.
[4] Myoung Ho S, Dong Seok H, Soon Bong C. Maximum torque control of stator-flux-oriented induction machine drive in the field-weakening region[J]. IEEE Transactions on Industry Applica- tions, 2002, 38(1): 117-122.
[5] Jul Ki S, Seung Ki S. Optimal flux selection of an induction machine for maximum torque operation in flux-weakening region[J]. IEEE Transactions on Power Electronics, 1999, 14(4): 700-708.
[6] Sang Hoon K, Seung Ki S. Maximum torque control of an induction machine in the field weakening region[J]. IEEE Transactions on Industry Applications, 1995, 31(4): 787-794.
[7] Peroutka Z, Zeman K. New field weakening strategy for AC machine drives for light traction vehicles[J]. European Conference on Power Electronics and Applications, 2007: 1-10.
[8] Bunte A, Grotstollen H, Krafka P. Field weakening of induction motors in a very wide region with regard to parameter uncertainties[C]. 27th Annual IEEE Power Electronics Specialists Conference, 1996: 944-950.
[9] Wade S, Dunnigan W, Williams B W. A new method of rotor resistance estimation for vector-controlled induction machines[J]. IEEE Transactions on Industrial Electronics, 1997, 44(2): 247-257.
[10] Moreira J C, Lipo T A. A new method for rotor time constant tuning in indirect field oriented control[J]. IEEE Transactions on Power Electronics, 1993, 8(4): 626-631.
[11] Matsuo T, Lipo T A. A rotor parameter identification scheme for vector-controlled induction motor drives[J]. IEEE Transactions on Industry Applications, 1985, 21(3): 624-632.
[12] Nayeem Hasan S M, Iqbal H. A Luenberger-sliding mode observer for on-line parameter estimation and adaptation in high-performance induction motor drives[C]. The 41st IAS Annual Conference on Industry Applications, 2006: 2447-2453.
[13] Du T, Vas P, Stronach F. Design and application of extended observers for joint state and parameter estimation in high-performance AC drives[J]. Electric Power Applications, IEE Proceedings, 1995, 142(2): 71-78.
[14] Li Cheng Z, DeMarco C L, Lipo T A. An extended Kalman filter approach to rotor time constant measurement in PWM induction motor drives[J]. IEEE Transactions on Industry Applications, 1992, 28(1): 96-104.
[15] 樊扬, 瞿文龙, 陆海峰, 等. 基于转子磁链q轴分量的异步电机间接矢量控制转差频率校正[J]. 中国电机工程学报, 2009, 29(9): 62-66.
Fan Yang, Qu Wenlong, Lu Haifeng, et al. Slip frequency correction method base on rotor flux q-axis component for induction machine indirect vector control system[J]. Proceedings of the CSEE, 2009, 29(9): 62-66.
[16] Maiti S, Chakraborty C, Hori Y, et al. Model reference adaptive controller-based rotor resistance and speed estimation techniques for vector controlled induction motor drive utilizing reactive power[J]. IEEE Transactions on Industrial Electronics, 2008, 55(2): 594-601.
[17] 陆海峰, 瞿文龙, 张磊, 等. 一种基于无功功率的异步电机矢量控制转子磁场准确定向方法[J]. 中国电机工程学报, 2005, 25(16): 116-120.
Lu Haifeng, Qu Wenlong, Zhang Lei, et al. A novel rotor flux oriented scheme of induction motor based on active power[J]. Proceedings of the CSEE, 2005, 25(16): 116-120.
[18] Bim E. Fuzzy optimization for rotor constant identification of an indirect FOC induction motor drive[J]. IEEE Transactions on Industrial Electronics, 2001, 48(6): 1293-1295.