220kV/3kA高温超导模型电缆过电流特性分析

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (624 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the 220kV/3kA level three-phase AC High Temperature Supercon- ducting (HTS) power cable, which can be applied in power system, we have manufactured 1.5-m long 220kV/3kA HTS model power cable and studied characteristic analysis of fault current under the short circuit. The HTS model power cable consists of Cu former, conductor layers, shield layer and electrical insulation layer. Furthermore, we have carried it out fault current experiment based on the DC critical characteristic test of HTS model power cable (critical current about 8kA), up to 40.4kA, 2s. Furthermore, we have obtained the fundamental component of the conductor layers of HTS model power cable on the short circuit time, and studied the transient characteristics of HTS model power cable, which concluded the impedance、 phase angle that lay a foundation for putting HTS power cable into operation in the grid.

Key words： keywords：HTS model power cable Fourier series algorithm overcurrent impedance liquid nitrogen

Received: 20 September 2012 Published: 12 December 2013

PACS:

TM249.7

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhou Haijing
	Zhang Huiyuan
	Liu Hongwei
	Wang Yinshun
	Li Qingyu
	Xue Chi
	Zhao Lianqi

Cite this article:

Zhou Haijing,Zhang Huiyuan,Liu Hongwei等. Over-Current Characteristics Analysis of 220kV/3kA HTS Model Power Cable[J]. Transactions of China Electrotechnical Society, 2013, 28(1增): 91-95.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2013/V28/I1增/91

[1] 林玉宝, 林良真, 李绍萍. 1kA级铋系高温超导模型电缆的研制[J]. 低温物理学报, 1999, 21(2): 122-130.
Lin Yubao, Lin Liangzhen, Li Shaoping. Development of 1kA class bismuth based HTS model cable[J]. Chinese Journal of Low Temperature Phsics, 1999, 21(2): 122-130.
[2] 戴少涛, 林良真, 林玉宝. 75m三相交流高温超导电缆研制[J]. 中国电机工程学报2007, 27(12): 91-96.
Dai Shaotao, Lin Liangzhen, Lin Yubao. Development of 75m long three-phase high temperature supercon- ducting power cable[J]. Proceeding of the CSEE, 2007, 27(12): 91-96.
[3] Ishiyama A, Wang X, Ueda H. Transient stability characteristics of a 1-m single-layer YBCO cable[J]. IEEE Transactions on Applied Superconductivity, 2007, 16(2): 1672-1675.
[4] Kim H Jensen, Chresten Traeholt, Erling Veje, et al. Over current experiments on HTS tape and cable conductor[J]. IEEE Transactions on Applied Superconductivity, 2001, 11(1): 1542-1545.
[5] Shinichi Mukoyama, Masashi Yagi, Tokui Yonemura, et al. Model cable tests for a 275kV/3kA HTS power cable[J]. IEEE Transactions on Applied Supercon- ductivity, 2011, 21(3): 1542-1545.
[6] Mukoyama S, Yagi M, Hirano N, et al. Study of an YBCO HTS transmission cable system[J]. IEEE Transactions on Applied Superconductivity, 2007, 22(4): 1150-1153.
[7] Ishiyama A, Wang X, Ueda H, et al. Over-current characteristics of superconducting model cable[J]. IEEE Transactions on Applied Superconductivity, 2008, 14(2): 2041-2045.
[8] Wang X, Ueda H, Ishiyama A, et al. Over-current characteristics of YBCO superconducting cable[J]. IEEE Transactions on Applied Superconductivity, 2009, 20(5): 1717-1721.
[9] Jinwun W Lue, Michael J Gouge, Robert C. Duckworth. Over-current testing of HTS tape[J]. IEEE Transactions on Applied Superconductivity, 2005, 15(2): 1835-1839.
[10] Wang Xudong, Hiroshi Ueda, Atasushi Ishiyama. Over-current characteristics of a 20m long YBCO model cable[J]. IEEE Transactions on Applied Superconductivity, 2009, 19(3): 1722-1727.