|
|
On-Line Revising Algorithm for Load Model Parameters of Substation in Different Daily Periods Based on the Measured Active Power |
Li Xinran1, Xu Zhenhua1, Song Junying2, Li Xiaoju1, Li Peiqiang1, Chen Huihua2 |
1. Hunan University Changsha 410082 China 2. Hunan Electric Power Company Changsha 410007 China |
|
|
Abstract This paper proposes an algorithm for the revising of the parameters of load model of substation in different periods during a day. Firstly the ability in extracting load characteristic of different kinds of feature parameters are analyzed through qualitative analysis and measured active power is chosen as the characteristic parameter when takes modifying model parameters in different daily periods into consideration. Secondly, on the basis of the clustering centers of substations and synthesis daily load profiles of typical industries, the weight of every parameter in different daily periods is calculated via super weighting method. Then the real time synthesis load proportion of classical industries is computed based on the single element judgement sets in different daily periods and the weight of the parameters which corresponds to the same period by means of fuzzy comprehensive judgement. At last, the load model parameters of substation in different daily periods is worked out through combining the real time proportions and typical industrial parameters which are derived by other methods. The algorithm proposed by this paper is compared with the method which is based on the whole daily load profile and with the traditional component-based approach method respectively, the results show that it is rational and effective.
|
Received: 16 March 2011
Published: 20 March 2014
|
|
|
|
|
[1] 张东霞, 汤涌, 朱方, 等. 东北电网大扰动试验方案研究[J]. 电网技术, 2007, 31(4): 49-54. Zhang Dongxia, Tang Yong, Zhu Fang. Study on testing scheme for large-disturbance test in Northeast China power grid[J]. Power System Technology, 2007, 31(4): 49-54. [2] 贺仁睦, 徐衍会, 马进, 等. 人工三相短路试验数据验证的负荷实测建模方法[J]. 电网技术, 2007, 31(4): 59-64. He Renmu, Xu Yanhui, Ma Jin, et al. Measurement- based load modeling proved by the data recorded during artificial three phases ground tests in the power system[J]. Power System Technology, 2007, 31(4): 59-64. [3] 鞠平, 谢会玲, 陈谦. 电力负荷建模研究的发展趋势[J]. 电力系统自动化, 2007, 31(2): 1-4, 64. Ju Ping, Xie Huiling, Chen Qian. Research tendencies of electric load modeling[J]. Automation of Electric Power Systems, 2007, 31(2): 1-4, 64. [4] 石景海, 贺仁睦. 动态负荷建模中的负荷时变性研究[J]. 中国电机工程学报, 2004, 24(4): 85-90. SHI Jinghai, HE Renmu. Load time-variation study in dynamic load modeling[J]. Proceedings of the CSEE, 2004, 24(4): 85-90. [5] 林舜江, 李欣然, 刘杨华, 等. 电力负荷动特性分类方法研究[J]. 电力系统自动化. 2005, 29(22): 33-38. Lin Shunjiang, Li Xinran, Liu Yanghua, et al. A classification method for aggregated load dynamic characteristics[J]. Automation of Electric Power Systems, 2005, 29(22): 33-38. [6] 李欣然, 林舜江, 刘杨华, 等. 基于实测响应空间的负荷动特性分类原理与方法[J]. 中国电机工程学报, 2006, 26(8): 39-44. Li Xinran, Lin Shunjiang, Liu Yanghua, et al. A new classification method for aggregate load dynamic characteristics based on field measured response[J]. Proceedings of the CSEE, 2006, 26(8): 39-44. [7] 林舜江, 李欣然, 刘杨华, 等. 基于实测响应空间的负荷动特性直接综合方法[J]. 中国电机工程学报, 2006, 26(21): 36-42. Lin Shunjiang, Li Xinran, Liu Yanghua, et al. A novel synthesis method for aggregate load dynamic characteristics based on field measured response[J]. Proceedings of the CSEE, 2006, 26(21): 36-42. [8] 李培强, 李欣然, 陈辉华, 等. 基于模糊聚类的电力负荷特性的分类与综合[J]. 中国电机工程学报, 2005, 25(24): 73-78. Li Peiqiang, Li Xinran, Chen Huihua, et al. The characteristic classification and synthesis power load based on fuzzy clustering[J]. Proceedings of the CSEE, 2005, 25(24): 73-78. [9] 黄梅, 贺仁睦, 杨少兵, 等. 东北电网负荷模型的分类与应用[J]. 电力系统自动化, 2005, 29(4): 85-87. Huang Mei, He Renmu, Yang Shaobing, et al. Application of load model classification in Northeast power network[J]. Automation of Electric Power Systems, 2005, 29(4): 85-87. [10] 鞠平, 陈谦, 熊传平, 等. 基于日负荷曲线的负荷分类和综合建模[J]. 电力系统自动化, 2006, 30(16): 6-9. Ju Ping, Chen Qian, Xiong Chuanping, et al. Load clustering and synthesis modeling based on daily load curves[J]. Automation of Electric Power Systems, 2006, 30(16): 6-9. [11] 黄文英, 方朝雄, 李可文, 等. 福建电网负荷在线综合建模系统[J]. 电网技术, 2006, 30(16): 6-9. Huang WenYing, Fang ChaoXiong, Li Kewen, et al. Online synthesis load modeling system for Fujian power grid[J]. Power System Technology, 2006, 30(16): 6-9. [12] 陈谦, 黄文英, 李成, 等. 电力负荷建模的在线统计综合法[J]. 电力系统自动化, 2008, 32(2): 8-10, 71. Chen Qian, Huang Wenying, Li Cheng, et al. Component based on-line modeling for electric loads[J]. Automation of Electric Power Systems, 2008, 32(2): 8-10, 71. [13] 秦莹, 江全元, 曹一家, 等. 基于广域测量系统的电力负荷建模方法[J]. 浙江大学学报(工学版), 2008, 42(7): 8-10, 71. Qin Ying, Jiang Quanyuan, Cao Yijia, et al. Wide-area measurement system based power load modeling[J]. Journal of Zhejiang University (Engineering Science), 2008, 42(7): 8-10, 71. [14] 李欣然, 钱军, 王立德, 等. 配电网集结等效的异步电动机综合负荷[J]. 电工技术学报, 2009, 24(4): 175-185. Li Xinran, Qian Jun, Wang Lide, et al. Synthesis induction motor Model of power composite load considering distribution network structure[J]. Transactions of China Electrotechnical Society, 2009, 24(4): 175-185. [15] 贺仁睦, 韩冬, 杨琳. 负荷模型对电网安全性的影响研究[J]. 电网技术, 2007, 31(5): 1-5. He Renmu, Han Dong, Yang Lin. Study on effect of load models on power system security[J]. Power System Technology, 2007, 31(5): 1-5. [16] 史真惠, 朱守真, 郑竞宏, 等. 改进BP神经网络在负荷动静比例确定中的应用[J]. 中国电机工程学报, 2004, 24(7): 25-29. Shi Zhenhui, Zhu Shouzhen, Zheng Jinghong, et al. Application of improved back propagation neural network for identification of the percentage of dynamic component in composite load[J]. Proceedings of the CSEE, 2004, 24(7): 25-29. [17] 中国电力科学研究院. 电力系统分析综合程序用户手册[R]. 北京: 中国电力科学研究院, 2004. [18] 徐振华, 李欣然, 钱军, 等. 变电站用电行业负荷构成比例的在线修正方法[J]. 电网技术, 2010, 34(7): 52-57. Xu Zhenhua, Li Xinran, Qian Jun et al. An Online Method to Modify Substation’s Structural Proportion of Synthetic load for power consuming-industries[J]. Power System Technology, 2010, 34(7): 52-57. [19] 李培强, 李欣然, 唐外文, 等. 统计综合法负荷建模中的行业用户精选[J]. 电力系统自动化, 2005, 29(14): 34-38. Li Peiqiang, Li Xinran, Tang Waiwen, et al. Consumer choice for an industry in statisticcal synthesis method based load modeling[J]. Automation of Electric Power Systems, 2005, 29(14): 34-38. [20] 李欣然, 姜学皎, 钱军, 等. 基于用户日负荷曲线的用电行业分类与综合方法[J]. 电力系统自动化, 2010, 34(10): 56-61. Li Xinran, Jiang Xuejiao, Qian Jun, et al. A classifying and synthesizing method of power consumer industry based on the daily load profile[J]. Automation of Electric Power Systems, 2010, 34(10): 56-61. [21] 蒋雯倩, 李欣然, 钱军, 等. 改进FCM算法及其电力负荷坏数据处理的应用[J]. 电力系统及其自动化学报, 2011, 23(5): 1-5. Jiang Wenqian, Li Xinran, Qian Jun, et al. Application of improved FCM algorithm in outlier processing of power load[J]. Proceedings of the Chinese Society of Universities for Electric Power System and Its Automation, 2011, 23(5): 1-5. [22] 李培强, 李欣然, 陈辉华, 等. 电力综合负荷感应电动机模型参数的研究[J]. 中国电力, 2005, 38(7): 6-10. Li Peiqiang, Li Xinran, Chen Huihua, et al. Research on inductor and constant impedance proportion of load modeling based on statistical synthesis approach[J]. Electric Power, 2005, 38(7): 6-10. |
|
|
|