螺旋槽横磁触头间真空电弧跨槽过程的实验与仿真研究

doi:10.19595/j.cnki.1000-6753.tces.250288

Abstract
Figure/Table
References
Related Citation (14)

Download: PDF (6764 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Vacuum circuit breakers are essential in medium/high voltage systems for the compact and eco-friendly design. Spiral slot transverse magnetic (TMF) contacts enhance arc control by slot-generated magnetic fields, but repeated arc crossing over slots induces localized erosion and slot filling, degrading performance.This study systematically investigates the slot-crossing process of vacuum arcs between spiral groove transverse magnetic (TMF) contacts, focusing on the dynamic evolution of arc morphology, plasma behavior, and their impacts on contact erosion and interruption performance. The slot-crossing process, where the arc transitions across spiral slots, critically influences contact ablation and arc motion stability. Understanding this process is essential for optimizing TMF contact design and enhancing the interruption capability of vacuum circuit breakers. By combining experimental observations with magnetohydrodynamic (MHD) simulations, this work elucidates the arc behavior during slot-crossing, including stagnation, anode-cathode jet separation, and velocity variations, providing insights into the interaction between arc dynamics and slot structures.
Experimental studies were conducted using a detachable vacuum chamber equipped with high-speed CCD cameras (20 000~22 000 frame per second) to capture arc morphology and voltage-current waveforms under peak currents ranging from 12 kA to 24 kA. The arc evolution during slot-crossing was categorized into four stages: initial expansion, unstable transition, motion, and diffusion. Key findings revealed that during slot-crossing, the arc transitions from a constricted mode to an anode jet mode, accompanied by a voltage drop of ~13 V. The arc stagnates near the slot edge, with its velocity decreasing by 80% (from ~300 m/s to 60 m/s), intensifying localized erosion. Higher peak currents prolonged the motion stage and stabilized arc morphology, reducing voltage fluctuations. Multi-angle imaging further quantified the arc trajectory, showing that slot-crossing accounted for a significant portion of the motion stage duration, highlighting its role in governing overall arc dynamics.
For simulation, a 2D transient MHD model was developed, coupling electromagnetic fields, plasma transport, and energy conservation equations. The model incorporated sheath layer effects, ionization, and heat flux interactions at electrode surfaces. Simulation results aligned with experimental observations, demonstrating ion density concentrations (up to 8.5×10²³ m^-3) and current density peaks (~10¹⁰ A/m²) near slot edges during slot-crossing. The sheath voltage at the cathode and anode surged to 29 V and 33 V, respectively, driving Joule heating (6.9×10¹⁰ W/m² at the anode and 4.3×10¹⁰ W/m² at the cathode) and material evaporation. The model validated the two-stage crossing mechanism: arc transitions from concentrated to anode-jet mode (voltage drop) and reverts post-crossing (voltage recovery), aligning with experimental observations.
The following conclusions are drawn: (1) The arc slot-crossing process comprises two distinct phases: a transition from a constricted mode (with voltage drop) to an anode jet mode, followed by re-constriction (voltage recovery), which reduces arc velocity by ~80% and intensifies groove-edge erosion due to prolonged localized heating. (2) Reducing the slot-crossing duration significantly enhances arc mobility, mitigates contact damage, and improves interruption performance by minimizing energy deposition in critical regions. (3) Optimizing groove geometry (e.g., slot width and number) is essential to balance electromagnetic force distribution and ablation resistance, providing critical theoretical and technical guidance for designing high-performance TMF contacts and advancing vacuum interrupters in alignment with sustainable energy goals.

Key words： Spiral slot contact vacuum arc arc simulation arc slot-crossing

Received: 24 February 2025

PACS:

TM561.2

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wei Leming
	Xiu Shixin
	An Minhao
	Wang Jiaxin
	Lin Xingyu

Cite this article:

Wei Leming,Xiu Shixin,An Minhao等. Experimental and Simulation Study on the Vacuum Arc Crossing Process Between Spiral Slot Transverse Magnetic Contacts[J]. Transactions of China Electrotechnical Society, 2026, 41(3): 1012-1025.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.250288 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I3/1012

[1] 马飞越, 姚晓飞, 刘志远, 等. 2/3匝线圈式纵磁触头大开距真空断路器分闸速度设计[J]. 电工技术学报, 2024, 39(13): 4139-4152.
Ma Feiyue, Yao Xiaofei, Liu Zhiyuan, et al.Design of opening velocities for large-gap vacuum circuit breakers with 2/3 coil-type axial magnetic field contacts[J]. Transactions of China Electrotechnical Society, 2024, 39(13): 4139-4152.
[2] 生鑫, 李争博, 付思, 等. 燃弧过程中真空旋转电弧轨迹追踪与特性[J]. 电工技术学报, 2024, 39(20): 6553-6563.
Sheng Xin, Li Zhengbo, Fu Si, et al.Tracking and characterization of vacuum rotating arc trajectories during arc-firing process[J]. Transactions of China Electrotechnical Society, 2024, 39(20): 6553-6563.
[3] 张在秦, 刘志远, 王闯, 等. 大电流真空电弧中阳极熔化过程的实验与仿真研究[J]. 电工技术学报, 2024, 39(7): 2143-2152, 2160.
Zhang Zaiqin, Liu Zhiyuan, Wang Chuang, et al.Experimental and numerical study on anode melting in high current vacuum arcs[J]. Transactions of China Electrotechnical Society, 2024, 39(7): 2143-2152, 2160.
[4] 刘洋, 管臣, 姚晓飞, 等. 72.5 kV快速真空断路器技术研究及开发[J]. 高压电器, 2024, 60(8): 11-19.
Liu Yang, Guan Chen, Yao Xiaofei, et al.Research and development on 72.5 kV fast vacuum circuit breaker technology[J]. High Voltage Apparatus, 2024, 60(8): 11-19.
[5] 肖淞, 石生尧, 林婧桐, 等.“碳达峰、碳中和”目标下高压电气设备中强温室绝缘气体SF₆控制策略分析[J]. 中国电机工程学报, 2023, 43(1): 339-358.
Xiao Song, Shi Shengyao, Lin Jingtong, et al.Analysis on the control strategy of the strong greenhouse insulating gas SF₆ in high-voltage electrical equipment under the goal of “emission peak and carbon neutrality”[J]. Proceedings of the CSEE, 2023, 43(1): 339-358.
[6] 钟建英, 孙广雷, 杨葆鑫, 等. 高电压等级真空断路器研究现状及展望[J]. 高电压技术, 2024, 50(2): 451-466.
Zhong Jianying, Sun Guanglei, Yang Baoxin, et al.Research status and prospect of high voltage vacuum circuit breaker[J]. High Voltage Engineering, 2024, 50(2): 451-466.
[7] 丁璨, 李江, 袁召, 等. 带铁心横磁-纵磁触头结构的优化设计[J]. 电工技术学报, 2024, 39(11): 3499-3509.
Ding Can, Li Jiang, Yuan Zhao, et al.Optimal design of transverse magnetic-axial magnetic contact structure with iron core[J]. Transactions of China Electrotechnical Society, 2024, 39(11): 3499-3509.
[8] Niwa Y, Sasage K, Yokokura K, et al.The arc behavior and the interruption ability of the transversal magnetic field electrode in the vacuum interrupter[C]//2006 International Symposium on Discharges and Electrical Insulation in Vacuum, Matsue, Japan, 2006: 161-164.
[9] 朱立颖, 武建文. 横向磁场下中频真空电弧形态及电弧电压特性[J]. 中国电机工程学报, 2011, 31(1): 131-137.
Zhu Liying, Wu Jianwen.Modes of intermediate-frequency vacuum arc and characteristics of arc voltage under transverse magnetic field[J]. Proceedings of the CSEE, 2011, 31(1): 131-137.
[10] Niwa Y, Palad R, Sasage K, et al.Vacuum arc behavior in transversal magnetic field electrode of vacuum interrupter[C]//2012 25th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Tomsk, Russia, 2012: 505-508.
[11] Li Wangpei, Smith R K, Leusenkamp M B J. Optimum number of petals for a spiral TMF contact[C]//2016 27th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Suzhou, China, 2016: 1-4.
[12] Ma Hui, Zhang Zaiqin, Geng Yingsan, et al.Rotation characteristics of vacuum arcs driven by transverse magnetic fields[J]. IEEE Transactions on Plasma Science, 2018, 46(6): 2181-2190.
[13] Jiang Yuzi, Xiu Shixin, Yang Jinwang, et al.Investigation on the arc root characteristics of vacuum arc between the iron-core cup-shaped transverse magnetic field contacts[J]. Physics of Plasmas, 2022, 29(4): 043505.
[14] Schulman M B.Separation of spiral contacts and the motion of vacuum arcs at high AC currents[J]. IEEE Transactions on Plasma Science, 1993, 21(5): 484-488.
[15] Kim B C, Kim S T.The influence of bridged slots on arc behavior in spiral type vacuum interrupter[C]//2011 1st International Conference on Electric Power Equipment-Switching Technology, Xi’an, China, 2011: 98-101.
[16] Dullni E, Schade E, Shang Wenkai.Vacuum arcs driven by cross-magnetic fields (RMF)[C]//20th International Symposium on Discharges and Electrical Insulation in Vacuum, Tours, France, 2002: 60-66.
[17] Liu Tao, Xiu Shixin, Li Rui, et al.Influence of slot number on the vacuum arc characteristics between spiral-type transverse magnetic field contacts[C]//The Proceedings of the 9th Frontier Academic Forum of Electrical Engineering, Xi’an, China, 2020: 145-155.
[18] Gentsch D, Shang W.High-speed observations of arc modes and material erosion on RMF-and AMF-contact electrodes[J]. IEEE Transactions on Plasma Science, 2005, 33(5): 1605-1610.
[19] Boxman R L.Interferometric measurement of electron and vapor densities in a high-current vacuum arc[J]. Journal of Applied Physics, 1974, 45(11): 4835-4846.
[20] Izraeli I, Boxman R L, Goldsmith S.The current distribution and the magnetic pressure profile in a vacuum arc subject to an axial magnetic field[J]. IEEE Transactions on Plasma Science, 1987, 15(5): 502-505.
[21] Keidar M, Schulman M B.On the effect of an axial magnetic field on the high-current vacuum arc[J]. IEEE Transactions on Plasma Science, 2000, 28(1): 347-350.
[22] Keidar M, Taylor E D.A generalized criterion of transition to the diffuse column vacuum arc[J]. IEEE Transactions on Plasma Science, 2009, 37(5): 693-697.
[23] Wang Lijun, Jia Shenli, Shi Zongqian, et al.High-current vacuum arc under axial magnetic field: numerical simulation and comparisons with experi-ments[J]. Journal of Applied Physics, 2006, 100(11): 113304.
[24] 王丹, 王立军, 王智炜, 等. 金属蒸气作用下弧后等离子体扩散过程的二维粒子模拟[J]. 中国电机工程学报, 2021, 41(15): 5391-5401.
Wang Dan, Wang Lijun, Wang Zhiwei, et al.Two-dimensional particle simulation of the post-arc plasma decay process in metal vapor[J]. Proceedings of the CSEE, 2021, 41(15): 5391-5401.
[25] 蒋原, 马速良, 武建文, 等. 中频真空电弧边缘击穿现象及仿真研究[J]. 电工技术学报, 2024, 39(9): 2887-2895.
Jiang Yuan, Ma Suliang, Wu Jianwen, et al.Experi-ment and simulation for edge breakdown in intermediate frequency vacuum arc[J]. Transactions of China Electrotechnical Society, 2024, 39(9): 2887-2895.
[26] Wei Leming, Xiu Shixin, Liu Zixi, et al.Numerical simulation and experimental investigation of the influence of gap distance on vacuum arc charac-teristics between TMF contacts[J]. IEEE Transactions on Plasma Science, 2024, 52(3): 951-958.
[27] Shmelev D L, Delachaux T, Schade E.Kinetic numerical simulation of the cathode attachment zone of constricted high-current vacuum arcs[J]. IEEE Transactions on Plasma Science, 2013, 41(2): 384-390.
[28] Liu Zixi, Xiu Shixin, Wang Ting, et al.Experimental and simulation research on influence of axial magnetic field components on vacuum arc between transverse magnetic field contacts[J]. IEEE Trans-actions on Plasma Science, 2019, 47(3): 1648-1656.
[29] 王立军, 胡丽兰, 周鑫, 等. 大尺寸电极条件下大电流真空电弧特性的仿真[J]. 电工技术学报, 2013, 28(2): 163-170.
Wang Lijun, Hu Lilan, Zhou Xin, et al.Simulation of high-current vacuum arc characteristics with big-size electrode conditions[J]. Transactions of China Electro-technical Society, 2013, 28(2): 163-170.
[30] Daalder J E.Cathode erosion of metal vapour arcs in vacuum[D]. Eindhoven: Eindhoven University of Technology, 1978.