双并列转子永磁同步电机设计与分析

doi:10.19595/j.cnki.1000-6753.tces.250231

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (7759 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In parallel-to-drive mechanical equipment, such as a double screw pump, a two-high mill, and a roll crusher, the mainstream of current driving mode is single-motor master-slave driving. A single motor transmits torque to the drive shaft through the transmission links. The driven shaft is driven by the mechanical synchronous gears between the two shafts, thus achieving reverse synchronous rotation. This driving mode has several issues, including a large equipment volume, low system efficiency, significant mechanical noise, challenging sealing, and regular maintenance requirements. Additionally, the single motor drive is primarily composed of an induction motor and a gearbox transmission, resulting in significant energy loss throughout the entire transmission system. This paper proposes a novel dual-parallel rotor permanent magnet synchronous motor (DR-PMSM) for directly driving parallel-to-parallel mechanical equipment. The DR-PMSM can eliminate the redundancy of the transmission system, offering advantages such as a small system size, high system efficiency, gearless transmission, and low mechanical noise.
The design method and electromagnetic characteristics of DR-PMSM are studied. The structure of DR-PMSM is described, and the new design parameters are defined. The operating principle of DR-PMSM is analyzed, and the effect of each magnetic flux path on the motor is studied. The general design process of this kind of motor is explored, and the design method and determination principle of each key link are given. On this basis, a DR-PMSM is designed, and a finite element model is constructed to analyze its electromagnetic characteristics, including the magnetic field, back electromotive force, inductance, torque, rotor electromagnetic force, and efficiency. The reasons for the asymmetry or imbalance in various electromagnetic characteristics are revealed. Additionally, the influence of key parameters on key performance is discussed, and the method for selecting and optimizing these parameters is provided. A DR-PMSM is manufactured, and a test platform is set up to verify the correctness of the proposed design method.
The following conclusions can be drawn. (1) The design process of DR-PMSM is divided into three parts. The key design links of each part are the determination of the coupling angle, the selection of the main size for the single-sided conventional motor, and the optimization of key parameters. (2) The coupling area of DR-PMSM distorts the air gap magnetic field. The asymmetric phenomenon of three-phase flux linkage, back EMF, inductance, etc., is caused by the asymmetry of the magnetic circuit in the coupling area. At the same time, the coupling area increases even harmonics in the electromagnetic torque, causing the rotor's electromagnetic force to become unbalanced. (3) Duty angle and coupling distance are the key parameters that determine the structure of the coupling area and directly affect the torque ripple and rotor electromagnetic force. The smaller duty angle is conducive to improving the key performance, and the coupling spacing needs to be selected according to the specific situation. The experimental results of the prototype demonstrate the feasibility of the proposed design method, providing theoretical guidance for the engineering application of DR-PMSM.

Key words： Dual-parallel rotor permanent magnet synchronous motor electromagnetic design electro- magnetic characteristic

Received: 17 February 2025

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Chen Yang
	Tao Dajun
	Ge Baojun
	Liu Xinyang

Cite this article:

Chen Yang,Tao Dajun,Ge Baojun等. Design and Analysis of Dual-Parallel Rotor Permanent Magnet Synchronous Motor[J]. Transactions of China Electrotechnical Society, 2026, 41(2): 442-456.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.250231 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I2/442

[1] 马伟明, 王东, 程思为, 等. 高性能电机系统的共性基础科学问题与技术发展前沿[J]. 中国电机工程学报, 2016, 36(8): 2025-2035.
Ma Weiming, Wang Dong, Cheng Siwei, et al.Common basic scientific problems and development of leading-edge technology of high performance motor system[J]. Proceedings of the CSEE, 2016, 36(8): 2025-2035.
[2] 龚夕霞, 李焱鑫, 卢琴芬. 模块化永磁直线同步电机考虑制造公差的推力鲁棒性优化[J]. 电工技术学报, 2024, 39(2): 465-474, 513.
Gong Xixia, Li Yanxin, Lu Qinfen.Thrust robustness optimization of modular permanent magnet linear synchronous motor accounting for manufacture tolerance[J]. Transactions of China Electrotechnical Society, 2024, 39(2): 465-474, 513.
[3] Li Jiaxin, Di Chong, Bao Xiaohua.Efficiency improvement for submersible motors by optimizing the ratio of diameter to shaft length[J]. IEEE Transa- ctions on Magnetics, 2022, 58(2): 8200806.
[4] Song Yongda, Liu Guangwei, Yu Siyang, et al.Investigation of a low-speed high-torque-density direct- drive external-rotor PMSM for belt conveyor appli- cation[J]. IEEE Access, 2023, 11: 110479-110489.
[5] 中华人民共和国工业和信息化部. 两部门关于印发《电机能效提升计划(2021-2023年)》的通知[OL]. 北京: 工业和信息化部办公厅, 市场监督管理总局办公厅. https://wap.miit.gov.cn.
[6] 于思洋, 王宇, 张岳, 等. 基于代理模型的双气隙混合转子低速大转矩同步电机优化设计[J]. 电机与控制学报, 2024, 28(10): 66-75.
Yu Siyang, Wang Yu, Zhang Yue, et al.Optimal design of low-speed high-torque synchronous motor with double air gap and hybrid rotor based on proxy model[J]. Electric Machines and Control, 2024, 28(10): 66-75.
[7] Zhao Yu, Li Dawei, Ren Xiang, et al.Optimal pole ratio of spoke-type permanent magnet vernier machines for direct-drive applications[J]. CES Transactions on Electrical Machines and Systems, 2022, 6(4): 454-464.
[8] Wu Shengnan, Li Zhimin, Tong Wenming.Research on thermal calculation and end winding heat con- duction optimization of low speed high torque permanent magnet synchronous motor[J]. CES Transa- ctions on Electrical Machines and Systems, 2023, 7(4): 397-403.
[9] 范良志, 林子镇, 陈振, 等. 织针直驱直线电机技术研究进展与挑战[J]. 电气技术, 2024, 25(6): 1-13, 23.
Fan Liangzhi, Lin Zizhen, Chen Zhen, et al.Research progress and challenges of the linear motor tech- nology for direct driving knitting needle[J]. Electrical Engineering, 2024, 25(6): 1-13, 23.
[10] Yu Yanlei, Pei Yulong, Chai Feng, et al.Performance comparison between permanent magnet synchronous motor and vernier motor for in-wheel direct drive[J]. IEEE Transactions on Industrial Electronics, 2023, 70(8): 7761-7772.
[11] 黄磊, 魏莱, 杨建龙, 等. 基于模型预测的直驱式波浪发电机机侧最优功率控制技术[J]. 电工技术学报, 2024, 39(14): 4391-4404.
Huang Lei, Wei Lai, Yang Jianlong, et al.Optimal power control technology of direct-drive wave power generation system based on model prediction[J]. Transactions of China Electrotechnical Society, 2024, 39(14): 4391-4404.
[12] Liu Guangwei, Liu Meiyang, Zhang Yue, et al.High- speed permanent magnet synchronous motor iron loss calculation method considering multiphysics factors[J]. IEEE Transactions on Industrial Electronics, 2020, 67(7): 5360-5368.
[13] Liu Zeyu, Zhang Bingyi, Hu Yan, et al.Design and analysis of concave-core stator direct-drive permanent magnet motor[J]. IET Electric Power Applications, 2023, 17(9): 1182-1196.
[14] 戴思锐, 厉伟, 冯桂宏, 等. 基于PDC-PMSM的双螺杆泵系统刚度及模态分析[J]. 机电工程, 2022, 39(2): 141-149, 165.
Dai Sirui, Li Wei, Feng Guihong, et al.Rigidity and modal analysis of twin-screw pump system based on PDC-PMSM[J]. Journal of Mechanical & Electrical Engineering, 2022, 39(2): 141-149, 165.
[15] Chen Qing, Yang Xiangyu, Zhong Guanming, et al.Design and analysis of double stator swing rotating permanent magnet spherical motor[J]. IEEE Transa- ctions on Magnetics, 2022, 58(8): 8204712.
[16] Xiang Zixuan, Bi Sheng, Zhu Xiaoyong, et al.High torque density and lightweight design of permanent magnet in-wheel motor based on magnetic field modulation effect[J]. IEEE Transactions on Mag- netics, 2023, 59(11): 8205207.
[17] 潘义阳, 徐衍亮, 徐凤辉. 新型盘式横向磁通永磁风力发电机的设计与分析[J]. 微电机, 2023, 56(2): 7-11.
Pan Yiyang, Xu Yanliang, Xu Fenghui.Design and analysis of a new disk type transverse flux permanent magnet wind generator[J]. Micromotors, 2023, 56(2): 7-11.
[18] 于丰源, 陈昊, 闫文举, 等. 宽窄定子极轴向磁通开关磁阻电机的设计与分析[J]. 电工技术学报, 2023, 38(5): 1261-1274.
Yu Fengyuan, Chen Hao, Yan Wenju, et al.Design and characteristic analysis of a wide-narrow stator poles axial flux switched reluctance machine[J]. Transactions of China Electrotechnical Society, 2023, 38(5): 1261-1274.
[19] 黄家楠, 章玮. 定子连体双轴永磁电机稳态特性分析[J]. 电机与控制学报, 2023, 27(6): 1-7.
Huang Jianan, Zhang Wei.Analysis of steady state characteristics of connected permanent magnet syn- chronous motor[J]. Electric Machines and Control, 2023, 27(6): 1-7.
[20] 陶大军, 陈阳, 李峥, 等. 双并列转子永磁直驱电机转子不平衡力分析与优化[J]. 电工技术学报, 2024, 39(10): 2961-2973.
Tao Dajun, Chen Yang, Li Zheng, et al.Analysis and optimization of unbalanced electromagnetic force on the rotor of dual-parallel rotor permanent magnet direct-driven motor[J]. Transactions of China Elec- trotechnical Society, 2024, 39(10): 2961-2973.
[21] 陈阳, 陶大军, 王立坤, 等. 双并列转子永磁同步电机转矩脉动产生机理及抑制[J]. 电工技术学报, 2024, 39(20): 6357-6370.
Chen Yang, Tao Dajun, Wang Likun, et al.Mechanism and suppression of torque ripple of dual-parallel rotor permanent magnet synchronous motor[J]. Transa- ctions of China Electrotechnical Society, 2024, 39(20): 6357-6370.
[22] 戈宝军, 范阵雨, 林鹏. 双并列转子永磁电机非对称负载运行特性[J]. 电机与控制学报, 2024, 28(10): 55-65.
Ge Baojun, Fan Zhenyu, Lin Peng.Asymmetric load operation characteristics of dual-parallel rotor per- manent magnet synchronous motor[J]. Electric Machines and Control, 2024, 28(10): 55-65.