曲面边界元中基于投影点单元细分奇异积分计算

doi:10.19595/j.cnki.1000-6753.tces.250894

Abstract
Figure/Table
References
Related Citation (7)

Download: PDF (3382 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The boundary element method (BEM) is a numerical computation method developed from the ideas of element division and discretization of the finite element method (FEM). The BEM is challenging to handle alongside other numerical methods, so it is important to leverage its strengths in high precision and computational efficiency. The singular/nearly singular integration problem, unique to BEM, has significantly affected its accuracy. In particular, the nearly singular integrals are often more difficult to handle than singular integrals due to their mathematical properties and the complexity of numerical computation.
This paper proposes ageneralized numerical computation method for nearly singular integrals to improve the accuracy of BEM, based on the curved boundary element method (CBEM) and coordinate transformation. The method subdivides the element in a scaled form, using the field-point projections onto the integration element as the basis for subdivision. For slender elements that often appear in surface meshing, the scaling is optimized by considering the longer side's dimensions to balance sub-element dimensions in all directions, thereby improving computational accuracy. Since the subdivision process is carried out in the parameter domain, the method can be applied to all planar and curved elements. In addition, adaptive methods are used to determine the number of subdivisions, ensuring high accuracy at any field point location.
In the single-element calculation, the planar triangular element and the spherical quadrilateral element are considered. The results show that, compared with the ordinary 4-point Gaussian integration and Gaussian point subdivision methods, the proposed method achieves higher accuracy and better adaptability to different field point locations, especially on curved elements. Through iterative convergence, the new method can effectively ensure a sufficient number of subdivisions. A model of an indoor ring conductor is constructed. In the comparative analysis, the proposed method effectively improves overall field accuracy and the maximum value. Subsequently, this paper takes the electric-field analysis problem of the actual converter valve tower as an example. The calculations are accelerated using the fast multipole algorithm, and the results are obtained on anordinary PC. The results show that the method achieves higher accuracy when using a similar number of Gaussian points, especially for the maximum field strength, which is of greater concern in engineering. In addition, the advantages of BEM in terms of computational time and cost are demonstrated in this calculation example.
The element subdivision method based on projection points effectively improves the accuracy of the nearly singular integrals, thereby reducing the overall computational error of BEM. This improvement highlights the advantage of BEM, demonstrating great potential across a wide range of applications. Therefore, this method is expected to provide a more accurate and efficient solution for the computation of complex engineering problems.

Key words： Boundary element method nearly singular integrals element subdivision curved element electric field calculation

Received: 25 May 2025

PACS:

TM151

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Duan Yiwei
	Wang Zezhong

Cite this article:

Duan Yiwei,Wang Zezhong. Calculation of Nearly Singular Integrals in Curved Boundary Element Method Based on Element Subdivision at Projection Points[J]. Transactions of China Electrotechnical Society, 2026, 41(10): 3221-3229.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.250894 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I10/3221

[1] 姚振汉, 王海涛. 边界元法[M]. 北京: 高等教育出版社, 2010.
[2] 王泽忠, 石雨鑫. 三维电场多极子曲面边界元方法研究[J]. 电工技术学报, 2018, 33(24): 5797-5804.
Wang Zezhong, Shi Yuxin.Fast multipole curved boundary element method for 3D electrostatic field[J]. Transactions of China Electrotechnical Society, 2018, 33(24): 5797-5804.
[3] 李亚莎, 王泽忠. 基于圆环坐标系的三维静电场曲边三角形边界元方法[J]. 电工技术学报, 2006, 21(9): 122-126.
Li Yasha, Wang Zezhong.Curve element BEM in 3-D electrostatic fields based on ring coordinate systems[J]. Transactions of China Electrotechnical Society, 2006, 21(9): 122-126.
[4] Zhang Jianming, Lu Chenjun, Zhang Xiuxiu, et al.An adaptive element subdivision method for evaluation of weakly singular integrals in 3D BEM[J]. Engin- eering Analysis with Boundary Elements, 2015, 51: 213-219.
[5] 姚厚朴, 校金友, 文立华. 高阶边界元奇异积分的一种通用高效计算方法[J]. 计算力学学报, 2015, 32(1): 1-6, 13.
Yao hope, Xiao jinyou, Wen lihua. An efficient method for numerically evaluating singular integrals in high order boundary element method[J]. Chinese Journal of Computational Mechanics, 2015, 32(1): 1-6, 13.
[6] 王富顺, 池宝涛, 贾志超, 等. 基于自适应单元细分法的高效高精度近奇异域积分计算[J]. 计算物理, 2023, 40(5): 548-555.
Wang Fushun, Chi Baotao, Jia Zhichao, et al.Efficient and high precision nearly singular domain integrals calculation based on adaptive element subdivision method[J]. Chinese Journal of Com- putational Physics, 2023, 40(5): 548-555.
[7] 孙锐, 胡宗军, 牛忠荣. 三维声场边界元法几乎奇异积分问题分析[J]. 计算物理, 2017, 34(5): 611-618.
Sun Rui, Hu Zongjun, Niu Zhongrong.Analysis of nearly singular integral problem in 3D acoustic field boundary element method[J]. Chinese Journal of Computational Physics, 2017, 34(5): 611-618.
[8] 胡宗军, 牛忠荣, 程长征. 三维边界元法高阶元几乎奇异积分半解析法[J]. 力学学报, 2014, 46(3): 417-427.
Hu Zongjun, Niu Zhongrong, Cheng Changzheng.A new semi-analytic algorithm of nearly singular integrals in high order boundary element analysis of 3d potential[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(3): 417-427.
[9] 胡宗军, 牛忠荣, 程长征, 等. 二维位势边界元法高阶单元几乎奇异积分半解析算法[J]. 计算力学学报, 2014, 31(6): 763-768, 798.
Hu Zongjun, Niu Zhongrong, Cheng Changzheng, et al.A novel semi-analytic algorithm of nearly singular integrals in high order boundary element analysis of 2D potential[J]. Chinese Journal of Computational Mechanics, 2014, 31(6): 763-768, 798.
[10] 刘静, 姚齐水, 杨文, 等. 边界元近奇异积分计算的迭代sinh-sigmoidal组合式变换法[J]. 应用数学和力学, 2021, 42(4): 385-393.
Liu Jing, Yao Qishui, Yang Wen, et al.An iterated sinh-sigmoidal combined transformation method for calculating nearly singular integrals of boundary elements[J]. Applied Mathematics and Mechanics, 2021, 42(4): 385-393.
[11] Li Xiaochao, Zhang Yaoming, Gong Yanpeng, et al.Use of the sinh transformation for evaluating 2D nearly singular integrals in 3D BEM[J]. Acta Mechanica, 2015, 226(9): 2873-2885.
[12] 谢贵重, 董云桥, 钟玉东. 基于 (α, β) 变换和距离变换的三维弱奇异边界积分近奇异性消除方法[J]. 固体力学学报, 2021, 42(2): 180-188.
Xie Zhongxie, Dong Yunqiao, Zhong Yudong.A method for removing near singularity of 3D weak singular boundary integral based on (α, β) trans- formation and distance transformation[J]. Chinese Journal of Solid Mechanics, 2021, 42(2): 180-188.
[13] Zhang Jianming, Wang Pan, Lu Chenjun, et al.A spherical element subdivision method for the numerical evaluation of nearly singular integrals in 3D BEM[J]. Engineering Computations, 2017, 34(6): 2074-2087.
[14] 贾志超, 王富顺, 郭前建, 等. 基于特征分区的奇异域积分单元细分法[J]. 兰州理工大学学报, 2024, 50(3): 143-150.
Jia Zhichao, Wang Fushun, Guo Qianjian, et al.An element subdivision method for singular domain integrals based on feature partition technique[J]. Journal of Lanzhou University of Technology, 2024, 50(3): 143-150.
[15] Zhang Jianming, Chi Baotao, Singh K M, et al.A binary-tree element subdivision method for evaluation of nearly singular domain integrals with continuous or discontinuous kernel[J]. Journal of Computational and Applied Mathematics, 2019, 362: 22-40.
[16] Chi Baotao, Jia Zhichao, Li Can, et al.An adaptive element subdivision method based on the affine transformations and partitioning techniques for evaluating the weakly singular integrals[J]. Journal of Computational and Applied Mathematics, 2024, 436: 115320.
[17] 王泽忠, 石雨鑫, 刘丽平. 应用快速多极子曲面边界元法的换流阀塔电场计算[J]. 电工技术学报, 2019, 34(2): 203-211.
Wang Zezhong, Shi Yuxin, Liu Liping.Calculating of electric field of converter valve tower by using fast multipole curved boundary element method[J]. Transactions of China Electrotechnical Society, 2019, 34(2): 203-211.
[18] 刘姜玲, 王泽忠. 三维静电场边界元法的积分精度问题[J]. 高电压技术, 2005, 31(9): 21-24.
Liu Jiangling, Wang Zezhong.Integral precision of the BEM of 3-D electric field[J]. High Voltage Engineering, 2005, 31(9): 21-24.
[19] Qin Xianyun, Zhang Jianming, Li Guangyao, et al.An element implementation of the boundary face method for 3D potential problems[J]. Engineering Analysis with Boundary Elements, 2010, 34(11): 934-943.
[20] 司文荣, 付晨钊, 苏磊, 等. 特高压换流变压器阀侧套管缩比模型典型缺陷下电场分布特性仿真研究[J]. 高压电器, 2024, 60(12): 85-94.
Si Wenrong, Fu Chenzhao, Su Lei, et al.Research on electric field distribution characteristics simulation under typical defects in the scaled model of valve side bushing of UHV converter transformer[J]. High Voltage Apparatus, 2024, 60(12): 85-94.
[21] 刘思佳, 文腾, 李学宝, 等. 高压大功率弹性压接型IGBT器件封装绝缘结构中的电场瞬态特性[J]. 电工技术学报, 2023, 38(23): 6253-6265.
Liu Sijia, Wen Teng, Li Xuebao, et al.Electric field transient characteristics of high voltage and high power compliant press-pack IGBT device package insulation structure[J]. Transactions of China Electro- technical Society, 2023, 38(23): 6253-6265.
[22] 沈丰慧, 高洋, 陈宇. 不同位置的金属微粒对GIS隔离开关电场的影响分析[J]. 高压电器, 2024, 60(8): 113-119.
Shen Fenghui, Gao Yang, Chen Yu.Analysis on influence of metal particles in different positions on electric field of GIS disconnector[J]. High Voltage Apparatus, 2024, 60(8): 113-119.
[23] Shi Yuxin, Wang Zezhong.A fast algorithm for calculating surface electric field of converter valve shield system by multipole boundary element method[J]. Science China Technological Sciences, 2018, 61(11): 1745-1754.
[24] Liu Yijun.Fast Multipole Boundary Element Method[M]. Cambridge, UK: Cambridge University Press, 2009.
[25] 石雨鑫, 王泽忠, 赵九才. 换流阀屏蔽系统表面电场对称多极子曲面边界元法研究[J]. 高电压技术, 2019, 45(4): 1182-1190.
Shi Yuxin, Wang Zezhong, Zhao Jiucai.Research on symmetric multipole curved boundary element method for surface electric field of converter valve shielding system[J]. High Voltage Engineering, 2019, 45(4): 1182-1190.
[26] 石雨鑫, 王泽忠, 赵九才. 柔性直流换流阀厅全模型电场多极子边界元分析[J]. 中国电力, 2021, 54(8): 60-67.
Shi Yuxin, Wang Zezhong, Zhao Jiucai.Full-model electric field analysis of flexible HVDC converter valve hall with fast multipole boundary element method[J]. Electric Power, 2021, 54(8): 60-67.