永磁同步磁阻电动机全负载区域功率因数特性分析

doi:10.19595/j.cnki.1000-6753.tces.L90261

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (6510 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Permanent magnet synchronous reluctance motor (PMSRM) is one of the most promising motor to replace permanent magnet synchronous motor (PMSRM), the high power factor of PMSRM in whole load range must be addressed. In this paper, Power factor characteristics of PMSRM in whole load range are analyzed with improved lumped parameter method and finite element method. Three typical states of power factor characteristics are obtained: local concave state in light load range, overall droop state in light load range, and the high power factor state in whole load range, which can effectively guide the engineering design of PMSRM. Furthermore, the correctness of the analysis conclusion is verified by the prototype test of a 5.5kW PMSRM.

Key words： Permanent magnet synchronous reluctance motor (PMSRM) power factor whole load range

Received: 07 July 2020

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Jin
	Li Yan
	Yu Zhanyang
	Zhang Jialin

Cite this article:

Wang Jin,Li Yan,Yu Zhanyang等. Analysis of Power Factor Characteristics of Permanent Magnet Synchronous Reluctance Motor in Whole Load Range[J]. Transactions of China Electrotechnical Society, 2021, 36(zk2): 451-459.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L90261 OR https://dgjsxb.ces-transaction.com/EN/Y2021/V36/Izk2/451

[1] Yang Guan, Zhu Zhiqiang, Afinow I A A, et al. Design of synchronous reluctance and permanent magnet synchronous reluctance machines for electric vehicle application[C]//2014 17th International Conference on Electrical Machines and Systems, Hangzhou, 2014: 1853-1859.
[2] 贾成禹, 王旭东, 周凯. 基于线性变参数模型预测控制的内置式永磁同步电机转速控制器设计[J]. 电工技术学报, 2020, 35(22): 4666-4677.
Jia Chengyu, Wang Xudong, Zhou Kai.Design of interior permanent magnet synchronous motor speed controller based on linear parameter-varying model predictive control[J]. Transactions of China Electrotechnical Society, 2020, 35(22): 4666-4677.
[3] 徐心愿, 王云冲, 沈建新. 基于最大转矩电流比的同步磁阻电动机DTC-SVM 控制策略[J]. 电工技术学报, 2020, 35(2): 246-254.
Xu Xinyuan, Wang Yunchong, Shen Jianxin.Direct torque control-space vector modulation control strategy of synchronous reluctance motor based on maximum torque per-ampere[J]. Transactions of China Electrotechnical Society, 2020, 35(2): 246-254.
[4] Liu Huaicong, Kim I G, Oh Y J, et al.Design of permanent magnet-assisted synchronous reluctance motor for maximized back-EMF and torque ripple reduction[J]. IEEE Transactions on Magnetics, 2017, 53(6): 8202604.
[5] 王瑾, 李岩, 贾建国, 等. 反电动势和凸极率对高效永磁同步磁阻电动机稳态特性影响分析[J]. 电工技术学报, 2020, 35(22): 4688-4698.
Wang Jin, Li Yan, Jia Jianguo, et al.Analysis of the influence of back-EMF and saliency ratio on steady-state characteristics of a high efficiency permanent magnet synchronous reluctance motor[J]. Transactions of China Electrotechnical Society, 2020, 35(22): 4688-4698.
[6] 杨晨, 白保东, 陈德志, 等. 可变磁通永磁辅助同步磁阻电动机设计与性能分析[J]. 电工技术学报, 2019, 34(3): 489-496.
Yang Chen, Bai Baodong, Chen Dezhi, et al.Design and analysis of a variable flux permanent magnet assisted synchronous motor[J]. Transactions of China Electrotechnical Society, 2019, 34(3): 489-496.
[7] Ferrari M, Bianchi N, Fornasiero E.Analysis of rotor saturation in synchronous reluctance and PM-assisted reluctance motors[J]. IEEE Transactions on Industry Applications, 2015, 51(1): 169-177.
[8] Kong Y, Lin Mingyao, Yin Ming, et al.Rotor structure on reducing demagnetization of magnet and torque ripple in a PMa-synRM with ferrite permanent magnet[J]. IEEE Transactions on Magnetics, 2018, 54(11): 8108705.
[9] 朱熀秋, 计宗佑, 丁海飞. 永磁辅助无轴承同步磁阻电动机优化及电磁分析[J]. 电机与控制学报, 2020, 24(4): 59-70.
Zhu Huangqiu, Ji Zongyou, Ding Haifei.Optimization and electromagnetic characteristic analysis of permanent magnet assisted bearingless synchronous reluctance motor[J]. Electric Machines and Control, 2020, 24(4): 59-70.
[10] Bianchi N, Fornasiero E, Soong W.Selection of PM flux linkage for maximum low-speed torque rating in a PM-assisted synchronous reluctance machine[J]. IEEE Transactions on Industry Applications, 2015, 51(5): 3600-3608.
[11] Kerdsup B, Takorabet N, Nahidmobarakeh B.Design of permanent magnet-assisted synchronous reluctance motors with maximum efficiency-power factor and torque per cost[C]//2018 XIII International Confer-ence on Electrical Machines, Alexandroupoli, 2018: 2465-2471.
[12] Chai Wenping, Yang H M, Xing Fuzhen, et al.Analysis and design of a PM-assisted wound rotor synchronous machine with reluctance torque enhancement[J]. IEEE Transactions on Industrial Electronics, 2020, DOI: 10.1109/TIE.2020.2982100.
[13] Maroufian S S, Pillay P.Design and analysis of a novel PM-assisted synchronous reluctance machine topology with AlNiCo magnets[J]. IEEE Transactions on Industry Applications, 2019, 55(5): 4733-4742.
[14] Maroufian S S, Pillay P.PM assisted synchronous reluctance machine design using AlNiCo magnets[C]//2017 IEEE International Electric Machines and Drives Conference, Miami, 2017: 1-6.
[15] Mohanarajah T, Nagrial M, Rizk J, et al.Permanent magnet optimization in PM assisted synchronous reluctance machines[C]//2018 IEEE 27th International Symposium on Industrial Electronics, Cairns, 2018: 1347-1351.
[16] Huynh T A, Hsieh M F, Shih K J, et al.An investigation into the effect of PM arrangements on PMa-SynRM performance[J]. IEEE Transactions on Industry Applications, 2018, 54(6): 5856-5868.
[17] Wang Yawei, Giacomo Bacco, Nicola Bianchi, et al.Geometry analysis and optimization of PM-assisted reluctance motors[J]. IEEE Transactions on Industry Applications, 2017, 53(5): 4338-4347.
[18] Wu Wenye, Zhu Xiaoyong, Li Quan, et al.Design and analysis of a hybrid permanent magnet assisted synchronous reluctance motor considering magnetic saliency and PM usage[J]. IEEE Transactions on Applied Superconductivity, 2017, 28(3): 5200306.
[19] Wang Yi, Ionel D M, Jiang Minjie, et al.Establishing the relative merits of synchronous reluctance and PM assisted technology through systematic design optimization[J]. IEEE Transactions on Industry Applications, 2016, 52(4): 2971-2978.